Lancashire · England
Bath Repair in Stalmine
Problem with your bath in Stalmine? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- Chips along the edge of the bath
- A failed DIY repair that is discoloured or lifting
Bath repair in Stalmine, done in place
Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, normally in a single visit. If you’re dealing with a kit repair that didn’t last and impact holes in acrylic, we can help, on acrylic, whirlpool & spa baths and pressed steel enamel alike.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Where
- Stalmine (FY6)
- Region
- Lancashire
- Cover
- One year on every repair
- Quotes
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
How we price bath repair
Repairs from £95. You’ll know the full cost before booking. We take into account:
- Any earlier repairs that need removing first
- How many areas need work
- Access to the area
- Unusual colours or finishes
Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it, and combining items on one visit brings it down.
Getting a price from photos
You can generally get a fixed price without us visiting. To make it quick:
- A clear, close picture of the problem area
- One picture of the whole bath
- Something in shot to show the size
- Any earlier repairs or coatings
To get a price, send two or three photos through our quote form or ring us. We’ll tell you honestly if a repair is the right fix.
Stalmine questions
It’s been repaired before. Can you still fix it?
Yes, regularly. It can add a little time, which we include in the quote.
Is there a call-out fee?
We don’t add a call-out fee. Your fixed quote includes everything.
Do you cover Stalmine?
Yes. We cover the whole UK and travel to Stalmine and the rest of Lancashire. Send us photos for a fixed quote, or call 0345 017 0787.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
How invisible is a bath repair?
On a bath in good condition, a colour matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
Do the materials smell?
There may be a mild smell during the work.
Is it worth repairing rather than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
What about rust by the waste?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
What we can’t put right
Some jobs are not right for a repair, including:
- Wear across the entire surface, which needs re-enamelling
- Leaking fittings, which need a plumber
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
Send us pictures and we will tell you honestly before booking.
Materials we repair
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
Towns and villages near Stalmine
Other services in Stalmine
Common problems we fix in Stalmine
The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Cracks in acrylic have a different cause: the bath is not properly supported, so it flexes under weight.
People generally call us when they notice something like this:
- Impact holes in acrylic
- Chips on the rim or sides
- Rust by the waste and overflow
- Scratches you can feel with a fingernail
Before booking anyone
- Is the price fixed, and does it include VAT?
- What the guarantee covers, and for how long
- If travel is included in the price
- How your room will be protected
Our work in Stalmine
Stalmine is about 3 miles north-east of Thornton, in Lancashire. We visit homes and businesses in Stalmine and the surrounding area, so nothing has to leave your home. Stalmine is one of 482 towns and villages in Lancashire we cover. Our jobs stretch from Stalmine to Liverpool (34 miles away).
Our visits in FY6 work the same way as everywhere else we cover. From Malvern Avenue, Harwood Close and Hillside Drive or a nearby road, we can come to you. If you are just outside Stalmine, we cover Cold Row (1 mile south), Sower Carr (1 mile south), Staynall (1 mile south-west), Hale Nook (1 mile south-east) and Hambleton (2 miles south). Larger places within reach include Preston (14 miles south-east), Lancaster (12 miles north-east), Lytham St Anne's (10 miles south), Morecambe (12 miles north), Fulwood (12 miles south-east) and Fleetwood (3 miles west).
Local landmarks in Stalmine
Typical jobs here are in homes near Stalmine Primary School, Church of St James and Saint Aidan's Church of England High School and the streets around them. For rail, the closest station is Poulton-Le-Fylde station, about 3.8 miles south-west of the centre. A little further out are Affinity Lancashire (2.8 miles north-west) and Fleetwood Hospital (3 miles north-west). Not far away are Winmarleigh and Cockerham Moss.
What happens on the day
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job generally takes a few hours. We clean up when we’re done and let you know when you can use it again.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, usually the next day.
Preparing for the visit
- Keep a parking space free if you can
- Tell us if there are stairs or a lift
- Have a window or extractor fan available
Get a quote
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Advice
Aftercare tips
Nothing complicated is needed, just a few sensible habits:
- Avoid scourers, wire wool and gritty cream cleaners
- Make sure an acrylic bath is firm underfoot
- Stick to mild cleaners and a soft cloth
- Put a towel in the bath if you are working above it
Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust sets in.
If water is getting through a crack, stop using the bath until it’s repaired. Leaks under a bath can damage floors and ceilings.
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Repair or replace in Stalmine?
Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like is not cheap. A repair keeps it in place. Our bath repair starts from £95. Our prices are the same across the UK, with no extra for Stalmine. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why Stalmine customers choose us
- Same prices wherever you are
- Everything repaired in place
- A year’s guarantee on all work
- Dust sheets down, tidy finish
Read our pricing or guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
