Lancashire · England
Bath Repair in Staynall
Damaged bath in Staynall? We put it right where it is, match it on site and back it with a one-year guarantee.
- Repairs from £95
- Cracks in an acrylic bath
- A hole punched through by something heavy
How we handle bath repair in Staynall
You don’t need a new bath because of a chip. We fill the damage, shape it to the curve of the bath and refinish it, mixing the colour on the day. Typical jobs include impact holes in acrylic and chips caused by builders, across cast iron enamel, whirlpool & spa baths and pressed steel enamel.
You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Location
- Staynall (FY6)
- Region
- Lancashire
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
For landlords and businesses
For anyone letting property in or around Staynall, we will quote for several properties at once. Send photos for each one and we will come back with a combined price.
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.
Repair or replace in Staynall?
Swapping a damaged bath for a new one normally involves a plumber, lifting out the old bath, re-tiling and a new panel and disposing of the old one. A repair fixes just the damaged area in one visit. Repairs from £95, with every job priced individually. What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your photos, so there are no surprises on the day.
What you get with us
- Colour mixed on the day to match
- Straight answers about what a repair can do
- One-year guarantee on every repair
- Most jobs done in one visit
Take a look at our prices page and resurfacing vs replacement cost guide.
What we do, step by step
We turn up when we said we would and checks the damage against your photos first. The floor and nearby surfaces are covered before any work starts. The work itself takes a few hours, and the room is left clean and tidy.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the next day.
Getting ready for the visit
- Point us to the nearest place to park
- Clear the area around the damage
- Let us know which floor the room is on
How to get a price
Upload photos of the damage and a wider shot of the entire item, and tell us you’re in Staynall, and we will come back with a fixed quote.
Related advice
Different materials, different repairs
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, just like other baths.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
Places near Staynall
More services for Staynall
Keeping it looking good
Much of the damage we repair could have been avoided. A few tips:
- Have new chips seen to early
- Do not scrub with anything abrasive
- Keep metal cans and razors off the surface
- Rinse the bath after use, especially in hard water areas
Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust sets in.
Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.
Staynall questions
Which areas do you work in?
Everywhere in the UK, Staynall included. There’s no extra charge for travel.
Do you come to Staynall?
Yes, we do. Technicians travel to Staynall from across the region, and the price is the same as everywhere else.
Is a cracked acrylic bath repairable?
Frequently, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a picture.
What about rust by the waste?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
How long before I can use the bath?
Most baths can be used the following day. We’ll tell you the exact curing time when we finish.
Is it worth repairing rather than replacing?
Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Can you redo someone else’s repair?
Most of the time. Tell us what was done before and we’ll plan for it.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
What we’re called out for in Staynall
Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.
Customers usually contact us about:
- Scratches you can feel with a fingernail
- Chips under the taps
- Chips caused by builders
- Hairline or through cracks in acrylic
Comparing quotes
- A fixed price, and whether VAT is included
- What protection goes down before work starts
- What happens if the damage is worse than the pictures show
- How to look after the finish
What we can’t put right
A few problems are outside what a surface repair can do:
- A bath that moves underfoot, until its support is fixed
- Metal that has corroded all the way through
- A bath worn all over, where resurfacing makes more sense
If in doubt, send pictures and we will say what we think.
What we work on
- Acrylic
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Covering Staynall
Staynall is about 2 miles north-east of Thornton, in Lancashire. Across the FY6 area, we come to you. We work in all 482 towns and villages in Lancashire. Our jobs stretch from Staynall to Liverpool (about 33 miles away).
We work across the FY6 postcode area. We also cover the places around Staynall: Cold Row (1 mile east), Sower Carr (1 mile east), Stalmine (1 mile north-east), Hambleton (1 mile south-east) and Hale Nook (2 miles east). We also work in nearby towns such as Preston (14 miles south-east), Lancaster (13 miles north-east), Lytham St Anne's (9 miles south), Morecambe (13 miles north), Fulwood (12 miles south-east) and Fleetwood (3 miles north-west).
What’s near Staynall
Our customers here include homes close to Stalmine Primary School, Millfield School and Wardleys pub and the streets around them. The nearest railway station is Poulton-Le-Fylde station, about 2.8 miles south. A little further out are Affinity Lancashire (2.7 miles north-west) and Bispham Hospital (2.8 miles south-west).
About our accreditations · Every repair comes with a one-year guarantee.
