Dorset · England
Bath Repair in Stanpit
Problem with your bath in Stanpit? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- Snagging damage from a refit
- Rust spots around the plughole
About our bath repair in Stanpit
It pays to repair bath damage while it’s small. On steel and cast iron, exposed metal starts to rust, and on acrylic, a crack keeps spreading while the bath flexes. A repair stops both. Common call-outs are for hairline or through cracks in acrylic and scratches you can feel with a fingernail, in whirlpool & spa baths, roll-top & freestanding and cast iron enamel.
Peace of mind is built in: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Area
- Stanpit (BH23)
- Area hub
- Dorset
- Cover
- 12 months on all our work
- Quote
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Covering Stanpit
Stanpit is about 1 mile south of Christchurch, in Dorset. Wherever you are in the BH23 postcode area, a technician comes to you. Our repair technicians cover 462 places across Dorset, from the larger towns to small villages.
Our visits in BH23 are booked in the same way as anywhere else. Jobs here include addresses on Bub Lane, Argyle Road and Sandown Road. We also travel to Mudeford (1 mile south-east), Somerford (1 mile north-east), Purewell (1 mile north-west), Christchurch (1 mile north) and Friars Cliff (1 mile east). Within a short drive, we also cover Wimborne Minster (11 miles north-west), Verwood (11 miles north-west), Ferndown (8 miles north-west), Broadstone (11 miles west), Corfe Mullen (12 miles west) and Swanage (12 miles south-west).
What’s near Stanpit
Our customers here include homes close to The Grange School, The Grange School and The Rising Sun Public House and the streets around them. Nearby too are Church of All Saints (within half a mile east) and Mudeford Junior School (under half a mile north-east). The nearest railway station is Christchurch station, roughly 1.5 miles north-west of the centre. Well-known places in the area include Christchurch Castle (0.9 miles west) and Christchurch (1.3 miles west). Green spaces nearby include St Catherine's Hill.
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Landlord and trade work in Stanpit
We carry out planned and one-off repairs for housing associations and facilities teams in Dorset and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
What we do, step by step
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which generally takes two to three hours for most chips. If anything looks different from your photos, we’ll talk to you before going ahead.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the next day.
Getting ready for the visit
- Have somewhere for us to park nearby if possible
- Let us know which floor the room is on
- Move bottles, mats and clutter away from the area
Get a quote
Upload photos of the damage and one of the entire item, and tell us you are in Stanpit, and we will come back with a fixed quote.
Advice
Keeping it looking good
Nothing complicated is needed:
- If an acrylic bath flexes, have its feet adjusted
- Stick to mild cleaners and a soft cloth
- Get any new chip repaired before it rusts
- Avoid scourers, wire wool and gritty cream cleaners
Don’t leave razors, cans or hair grips in the bath, because they can mark the enamel. And fix dripping taps promptly.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
Your questions about bath repair in Stanpit
Can you repair a hole in a bath?
In most cases. Photos of the hole and the underside help us check.
Can you redo someone else’s repair?
Yes, we frequently do. It can add a little time, which we include in the quote.
How do I get a price for bath repair in Stanpit?
Prices start from £95. We give a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Do you cover Stanpit?
Yes. We work across the UK and travel to Stanpit. Send pictures and we’ll quote, or call 0345 017 0787.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders in Stanpit.
Do the materials smell?
It depends on the job, but often a little. Ventilation keeps it to a minimum, and it soon fades.
What do you need from me?
Photos of the damage, a picture of the entire bath and your postcode. After that, we just agree a date.
When a repair is not the answer
A repair is not always the answer, and we’d rather say so up front. Repairs won’t solve:
- Metal that has corroded all the way through
- Flexing caused by a failed cradle or loose feet
- Cracks in acrylic we can’t reach from underneath
Send us pictures and we’ll tell you honestly.
Materials we repair
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
What your bath is made of matters
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, in much the same way.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Towns and villages near Stanpit
More services for Stanpit
What we’re called out for in Stanpit
Glass and heavy bottles cause more chips than anything else, with dropped shower heads close behind. Fittings cause damage too: water sits around them, and any chip there soon rusts.
Send us a picture if you notice any of these:
- Hairline or through cracks in acrylic
- Rust by the waste and overflow
- A chipped rim or side
- Snagging damage from a refit
Questions to ask before booking
- Who will actually do the work
- When it can be used again
- Whether they match the colour on site
- How long the guarantee is and what it covers
Prices and what affects them
Prices start from £95. Quotes are free and the price is fixed. What we look at:
- What the surface is made of
- The size and number of damaged areas
- Whether old repairs or coatings need taking off
- How many items we do on one visit
Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
Send photos for a quote
Photographing the damage takes a minute, and it saves a visit. Try to send:
- Any earlier repairs or coatings
- Where you are, by postcode
- Natural light rather than flash
- A photo taken from further back
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job the same day in most cases.
About our accreditations · Every repair comes with a one-year guarantee.
