Bath and North East Somerset · England
Bath Re-enamelling for Stanton Wick homes
Full bath re-enamelling and resurfacing for homes and businesses in Stanton Wick and across Bath and North East Somerset. Send photos for a free, fixed quote.
- Resurfacing from £350
- An outdated colour you’d like to change
- A bath that stays dull however much you clean it
About our bath re-enamelling in Stanton Wick
We don’t move the bath, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, with the bath ready to use the following day. We work on cast iron baths, pressed steel baths and basins & shower trays, and the jobs we see most are a bath that stays dull however much you clean it and staining under the taps and around the waste.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Stanton Wick (BS39)
- Area hub
- Bath and North East Somerset
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
Keeping it looking good
Nothing complicated is needed:
- Get any chip repaired quickly
- Leave the bath for the full curing time before using it
- Wipe the bath dry after use in hard water areas
- Don’t let dyes or oils sit on the finish
The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
What a repair can’t fix
Not everything can be repaired, and we’ll tell you before we start. We cannot fix:
- Damage hidden under a previous coating, until it’s stripped back
- Leaks from fittings rather than the bath
- A poorly supported acrylic bath, until it’s firmed up
Send us photos and we’ll tell you honestly before booking.
Surfaces we repair
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
How it works
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job typically takes a full day. We clean up when we’re done and tell you when it’s ready to use.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Avoid using the area for a few hours before we arrive
- Have a window or extractor fan available
- Clear the area around the damage
Getting a price
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them to us. You will get a fixed quote, not an estimate.
Advice
Also near Stanton Wick
More services for Stanton Wick
Repair or replace: which is better?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. We charge the same wherever you are, with no extra for Stanton Wick. What changes the price is the job itself: the material, the amount of damage and how many items.
Why book with us
- Nothing taken out or refitted
- Colours mixed by hand to suit your surface
- We leave the room as we found it
- We will tell you if it’s not worth repairing
See our prices page and guide to resurfacing and replacement costs.
Our work in Stanton Wick
Stanton Wick is about 4 miles south-west of Keynsham, in Bath and North East Somerset. We agree a date that works for you, and you will know when to expect us, so you’re not left waiting in all day. Stanton Wick is one of 136 towns and villages in Bath and North East Somerset where we work.
All of BS39 is within our area. You will find streets such as Wick Lane and Stanton Wick Lane. Neighbouring places we cover include Upper Stanton Drew (1 mile north-west), Stanton Drew (1 mile west), Pensford (1 mile north), Chelwood (1 mile east) and Breach (1 mile south-east). Further out, we also cover Bath (8 miles east), Keynsham (4 miles north-east), Bathwick (9 miles east), Walcot (9 miles east), Westmoreland (8 miles east) and Kingsmead (8 miles east).
Near you in Stanton Wick
We visit homes around Stanton Drew Primary School and St Thomas à Becket Church. The nearest railway station is Keynsham station, roughly 5 miles north-east. A little further out are South Bristol Community Hospital (4.2 miles north) and Oval enclosure (2 miles south-west). Not far away are Knowle Hill and Hunstrete Lake.
Different materials, different repairs
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
What we are called out for in Stanton Wick
Previous coatings can fail too, lifting by the plughole or blistering. We strip what’s failing and start again.
Send us a picture if you notice any of these:
- Thin, worn enamel in places
- Lots of chips and rust spots
- An outdated colour you’d like to change
- A bath that stays dull however much you clean it
Comparing quotes
- Whether the price covers travel
- What protection goes down before work starts
- How soon you can use it again
- What happens if the damage is worse than the photos show
Work for landlords and builders
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Common questions in Stanton Wick
Will the bath be moved?
No. We resurface it in place, so nothing else is disturbed.
What do you need from me?
A close-up, a wider photo and your postcode. After that, we just agree a date.
How long does re-enamelling take?
Normally one day, with the bath ready the following day. A badly pitted bath can need a second day.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Can you do the outside of a roll-top?
Yes. Inside and out if you’d like.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Is there a call-out fee?
We do not add a call-out fee. The fixed quote covers the visit and the work.
Do the materials smell?
Some materials have a smell while they’re applied. It clears as the materials cure.
About our accreditations · Every repair comes with a one-year guarantee.
