County Durham · England
Bath Repair for Station Town homes
Bath repair across Station Town and nearby, typically in one visit.
- Repairs from £95
- Chips on the rim or sides
- Deep scratches in acrylic
Your questions about bath repair in Station Town
How long does the repair take to cure?
Typically the next day. We confirm the time before we leave.
Can you quote from photos?
Generally, yes. A close-up and a wider photo are enough to give a fixed quote.
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Is my repair covered?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
Which areas do you work in?
All of County Durham, and the rest of the UK. There’s no extra charge for travel.
When can you do it?
We will give you dates with your quote. Tell us if you need it done quickly.
Do you work in Station Town?
Yes, we do. Repair technicians travel to Station Town from across the region, with no extra charge for travel.
How do I get a price for bath repair in Station Town?
Repairs from £95. Every job gets a fixed price from your pictures. Send a close-up of the damage and a wider photo with your TS28 postcode.
Bath repair at your home in Station Town
Chips, cracks, rust spots and small holes is repaired in place. There’s no plumbing to disconnect, the tiles aren’t touched, and the repaired area is colour-matched so it blends in. We regularly repair acrylic, pressed steel enamel and roll-top & freestanding, and the jobs we see most are chips along the edge of the bath and an old repair that has yellowed or come loose.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Area
- Station Town (TS28)
- Region
- County Durham
- Cover
- One year on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
When we would advise against a repair
Before you book, it’s worth knowing the limits:
- Cracks in parts of an acrylic bath we can’t get to from below
- Leaks from the waste or overflow fittings (a plumber’s job)
- Metal that has corroded all the way through
Not sure? Send pictures and we’ll give you a straight answer.
What we work on
- Cast iron enamel
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
Prices and what affects them
Prices start from £95. Each job gets its own fixed quote. These are the things that affect it:
- Any earlier repairs that need removing first
- Unusual colours or finishes
- Whether it’s a chip, crack, burn or wear
- How much damage there is
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Quotes from your photos
You can take the pictures on your phone. Just ensure we can see:
- The material, if you know it
- A close-up of the damage, in focus
- Whether it’s been repaired or coated before
- Daylight if possible, and no flash reflection
The quickest way to a price is to send two or three photos using our quote form or ring us. We will say right away if a repair is the right fix.
How the visit works
We agree an arrival time beforehand. On site, it takes two to three hours for most chips. The room is left tidy and ready to use once it has cured.
- We start by cleaning the damage and taking out loose enamel and rust.
- The chip or crack is filled, then sanded level with the bath.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can usually use the bath the day after.
How to prepare
- Mention any parking restrictions or tricky access
- Let us know if it has been repaired before
- Have a window or extractor fan available
Ask for a price
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we will reply with a fixed quote. There’s no charge for the quote and you’re under no obligation.
Advice
Can I fix it myself?
If you are set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
Nearby places to Station Town
More services for Station Town
Keeping it looking good
Much of the damage we repair could have been avoided. A few tips:
- Protect the bath with a towel when doing jobs nearby
- Keep abrasive pads and gritty cleaners away from the bath
- A dripping tap stains enamel, so fix it early
- Rinse the bath after use, especially in hard water areas
Keep metal objects like razors and cans off the surface, as they can leave rust marks. And fix dripping taps promptly.
Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.
Landlords, agents and businesses in Station Town
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we will arrange it.
Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Do you need bath repair in Station Town?
Damage during fitting is very common. Tradespeople drop tools and tiles into the bath, often before anyone notices. We repair snagging damage like this regularly.
The most common problems we’re called about are:
- A chip where the taps sit
- Chips on the rim or sides
- Hairline or through cracks in acrylic
- Damage done while the bathroom was being fitted
Before booking anyone
- The length of the guarantee and what it covers
- What prep work is covered
- Whether there are any call-out or travel charges
- Whether a trained technician does the job
Different materials, different repairs
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Station Town and nearby
Station Town is about 3 miles south of Peterlee, in County Durham. Across the TS28 area, we come to you. We work in all 329 towns and villages across County Durham, from the larger towns to small villages. Our nearest city page is Newcastle upon Tyne, about 21 miles away.
We cover every part of TS28 and the streets around it. You will find streets such as Station Road, Front Street and Milbank Terrace, all of which we cover. Other places close to Station Town include Wingate (1 mile north), Hutton Henry (1 mile east), Castle Eden (1 mile north-east), Eden Vale (1 mile north-east) and Old Shotton (2 miles north). We also work in nearby towns such as Durham (9 miles north-west), Newton Aycliffe (11 miles south-west), Bishop Auckland (13 miles west), Spennymoor (9 miles west), Seaham (8 miles north) and Chester-le-Street (12 miles north-west).
Around Station Town
We visit homes around Wellfield School, Wingate Primary School and Church of the Holy Trinity and the streets around them. The nearest railway station is Horden station, about 3.9 miles north-east. Further afield, we also cover the area around Peterlee Community Hospital (2.7 miles north-east) and Castle Eden (1.9 miles north-east).
About our accreditations · Every repair comes with a one-year guarantee.
