Cheshire West and Chester · England
Bath chip & crack repair in Stoak, Cheshire West and Chester
Our repair technicians come to Stoak for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- Chips caused by builders
- A chip where the taps sit
What affects the price in Stoak
Repairs from £95. We price every job individually. What matters most is:
- What the surface is made of
- The colour and finish to match
- Access to the area
- Any earlier repairs that need removing first
Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Send pictures for a quote
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- A coin or ruler next to the damage for scale
- Good light, ideally daylight, without flash glare
- The material, if you know it
- A clear, close picture of the problem area
If you’re in Stoak and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Bath repair in Stoak, done in place
Most bath damage, from chips and cracks to rust spots and holes, is repaired in place. Nothing is unplumbed, the tiles are not touched, and the finish is matched to the rest of the bath. We work on roll-top & freestanding, whirlpool & spa baths and pressed steel enamel, and the jobs we see most are chips caused by builders and a hole punched through by something heavy.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
- Location
- Stoak (CH2)
- Region
- Cheshire West and Chester
- Warranty
- One year on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Stoak and the surrounding area
Stoak is about 3 miles south-east of Ellesmere Port, in Cheshire West and Chester. Our repair technicians come to customers in Stoak and the surrounding area, so nothing has to leave your home. We work in all 224 towns and villages in Cheshire West and Chester, from the larger towns to small villages. Our nearest city page is Liverpool, about 11 miles away.
Here we cover the CH2 postcode area. That includes homes on Church Lane, Little Stanney Lane and Bunbury Close and the roads around them. Nearby, we also work in Croughton (1 mile south-west), Wervin (1 mile south), Little Stanney (1 mile north-west), Chorlton-by-Backford (1 mile south-west) and Picton (1 mile south-east). Larger places within reach include Chester (4 miles south), Ellesmere Port (3 miles north-west), Winsford (15 miles east), Northwich (14 miles east), Neston (8 miles west) and Boughton (5 miles south).
What’s near Stoak
Typical jobs here are in homes near Rake Hall pub, Cheshire Oaks High School and St Lawrence's Church and the streets around them. The nearest railway station is Stanlow & Thornton station, roughly 2 miles north-east of the centre. Well-known places in the area include Cheshire Oaks Designer Outlet (1.1 miles north-west) and Municipal Borough of Ellesmere Port (2.5 miles north-west). Open spaces near Stoak include Gowy Meadows Nature Reserve.
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches can be filled and colour matched, in much the same way.
Can I fix it myself?
If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Landlord and trade work in Stoak
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip.
For anyone letting property in or around Stoak, we will quote for several properties at once. Just send photos for each address and we will come back with a combined price.
Stoak questions
Can you repair a failed DIY repair?
Yes. We take out the old repair and do it properly. Mention it when you send pictures.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
What happens next?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Is a cracked acrylic bath repairable?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
What information do you need?
Just pictures, your postcode and a contact number. On the day, access to the room.
Will the repair last?
It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.
Do you need bath repair in Stoak?
Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.
The things customers usually mention when they call include:
- Rust by the waste and overflow
- Holes from dropped items
- A chip where the taps sit
- Hairline or through cracks in acrylic
Before booking anyone
- How long the guarantee is and what it covers
- What aftercare is recommended
- What prep work is covered
- Whether the price is fixed and includes VAT
The process
You do not need to empty the room beforehand. Everything we use comes in the van with us, put protection down and get going once we’ve agreed what we’re doing. It typically takes two to three hours for most chips, and you’re welcome to carry on with your day while we work.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the following day.
Before we arrive
- Clear the area around the damage
- Ensure the area is dry
- Mention any earlier repairs or resurfacing
Getting a price
Email us photos of the damage and a wider shot of the entire item, and tell us you’re in Stoak, and we will come back with a fixed quote.
Read more
Looking after it afterwards
Much of the damage we repair could have been avoided. These habits help:
- If an acrylic bath flexes, have its feet adjusted
- Rinse it down after each bath
- Stick to mild cleaners and a soft cloth
- Have new chips seen to early
Keep metal objects like razors and cans off the surface, because they can mark the enamel. And fix dripping taps promptly.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and it can start to leak underneath.
When a repair is not the answer
We would rather lose a job than do one that will not last, so these are the limits:
- Cracks in parts of an acrylic bath we can’t get to from below
- Metal that has corroded all the way through
- A whole bath that is dull or worn, where a full re-enamel is the better fix
Not sure? Send photos and we’ll give you a straight answer.
Materials we repair
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
Places near Stoak
Other services in Stoak
About our accreditations · Every repair comes with a one-year guarantee.
