Cheshire West and Chester · England
Bath Re-enamelling for Stoak homes
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Stoak. Send pictures for a free, fixed quote.
- Resurfacing from £350
- Wear marks under the taps
- Brown or grey marks that do not clean off
For landlords and businesses
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
We regularly work with letting and managing agents. Send the address, pictures and access details and we’ll handle the rest.
Bath re-enamelling in Stoak without replacing anything
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, so we don’t cut corners on it. Whether it’s lots of chips and rust spots and a period or roll-top bath worth keeping, we can typically put it right, on Victorian roll-tops, pressed steel baths and cast iron baths alike.
We stand behind the work with a one-year guarantee.
- Location
- Stoak (CH2)
- County
- Cheshire West and Chester
- Guarantee
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Where we work around Stoak
Stoak is about 3 miles south-east of Ellesmere Port, in Cheshire West and Chester. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in 224 places in Cheshire West and Chester, from the larger towns to small villages. Our nearest city page is Liverpool, about 11 miles away.
Postcode districts we cover here: CH2. Whether you live on Church Lane, Little Stanney Lane and Bunbury Close or anywhere nearby, we can come to you. Nearby, we also work in Croughton (1 mile south-west), Wervin (1 mile south), Little Stanney (1 mile north-west), Chorlton-by-Backford (1 mile south-west) and Picton (1 mile south-east). Further out, we also cover Chester (4 miles south), Ellesmere Port (3 miles north-west), Winsford (15 miles east), Northwich (14 miles east), Neston (8 miles west) and Boughton (5 miles south).
Around Stoak
Typical jobs here are in homes near Rake Hall pub, Cheshire Oaks High School and St Lawrence's Church, among other places. The closest station to Stoak is Stanlow & Thornton station, roughly 2 miles north-east. Further afield, we also cover the area around Cheshire Oaks Designer Outlet (1.1 miles north-west) and Municipal Borough of Ellesmere Port (2.5 miles north-west). Not far away are Gowy Meadows Nature Reserve.
What a repair cannot fix
Before booking, it’s worth knowing the limits too:
- Holes rusted through the metal
- Damage hidden under a previous coating, until it’s stripped back
- Acrylic that moves when you stand in it
Send us pictures and we will tell you honestly.
Materials we repair
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
What affects the price in Stoak
Resurfacing from £350. You will not pay by the hour. The price is based on:
- Whether we combine several jobs
- The colour and finish to match
- What kind of damage it is
- Previous DIY repairs that have to come out
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Getting a price from photos
You can take the photos on your phone, there is no need for anything special. Just ensure we can see:
- One picture of the entire bath
- Where you are, by postcode
- Daylight if possible, and no flash reflection
- A coin or ruler next to the damage for scale
To get a price, send two or three photos through our quote form or ring us. We will tell you honestly if a repair is the right fix.
Stoak: your questions answered
Do you work for landlords and businesses?
Yes, frequently. We can quote for several properties together and work between tenancies.
Do you cover the entire of Cheshire West and Chester?
Everywhere in the UK, Stoak included. There is no extra charge for travel.
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
Do the materials smell?
There can be some smell while we work, which is why we ventilate. It clears as the materials cure.
Can you change the colour of my bath?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Can you redo someone else’s repair?
Yes, regularly. Removing the old work can add time, and that’s in the quote.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted.
Is there a smell?
There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.
Materials and what they mean for the repair
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we check it carefully.
The process
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes the best part of a day, and we finish with a tidy-up and a look at the finished work together.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Keep children and pets away from the room on the day
- Avoid using the area for a few hours before we arrive
- Tell us if there are stairs or a lift
Getting a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price without visiting.
Related advice
Looking after it afterwards
Most damage we see is avoidable. These habits help:
- Do not leave a chip unrepaired
- Keep suction mats out of the bath
- Use washing-up liquid and a soft cloth
- Rinse off hair dye, oils and bath bombs right away
A quick rinse and wipe after use helps, particularly where water is hard, to stop limescale building up.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
Places near Stoak
Also in Stoak
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
Common problems we fix in Stoak
Older baths often have several problems at once: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
It’s worth getting a quote if you see:
- A dull, rough surface that will not come clean
- Thin, worn enamel in places
- A period or roll-top bath worth keeping
- An old resurfacing that’s failing
Comparing quotes
- How the room is protected while they work
- How the colour is matched
- How to care for the finish
- What happens if the damage is worse than the photos show
About our accreditations · Every repair comes with a one-year guarantee.
