Herefordshire · England

Bath chip & crack repair in Stocking, Herefordshire

Bath repair across Stocking and nearby, typically in one visit.

  • Repairs from £95
  • Chips on the rim or sides
  • A cracked acrylic bath
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Stocking

Common problems we fix in Stocking

Baths take more knocks than people expect: bottles, shower heads and razors are dropped every day, and taps and wastes are tightened against the surface. Sooner or later, most baths pick up a chip.

The things customers generally mention when they call include:

  • Damage done while the bathroom was being fitted
  • A kit repair that didn’t last
  • Rusty patches near the plughole
  • Hairline or through cracks in acrylic

What to look for in a quote

  • The length of the guarantee and what it covers
  • What prep work is covered
  • How the room is protected while they work
  • Whether a trained technician does the job

Choosing a repair company

Bath repair at your home in Stocking

Most of our bath repairs take a few hours, and you can normally bathe again the next day. There’s no need to book a plumber or tiler, because the bath doesn’t move. Whether it’s rusty patches near the plughole and a kit repair that didn’t last, we can help, on roll-top & freestanding, whirlpool & spa baths and pressed steel enamel alike.

We stand behind the work with a one-year guarantee, so you are covered after the visit.

Area
Stocking (HR1)
Region
Herefordshire
Warranty
A year, on every repair
Quote
From £95. Fixed and free, based on photos
Telephone
0345 017 0787
Page updated
23 October 2026
Broken acrylic bath corner, rebuilt and refinished (before and after)

Honest limits

Not everything can be repaired, and we will tell you before we start. We cannot fix:

  • Leaking fittings, which need a plumber
  • Wear across the whole surface, which needs re-enamelling
  • A steel bath rusted through

If in doubt, send photos and we will say what we think.

What we work on

  • Cast iron enamel
  • Pressed steel enamel
  • Acrylic
  • Whirlpool & spa baths
  • Roll-top & freestanding

How we price bath repair

Repairs from £95. We price every job individually, from your pictures. The main factors are:

  • Whether we combine several jobs
  • How much damage there is
  • The material and finish
  • The type of damage

We don’t add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Quotes from your photos

Good pictures mean an accurate price. Here’s what we find most useful:

  • Natural light rather than flash
  • One picture of the entire bath
  • The postcode, so we can plan the visit
  • A close-up of the damage, in focus

You do not need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.

For landlords and businesses

We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

Questions from Stocking

Can rust on a bath be repaired?

Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.

Do the materials smell?

A little, depending on the job. Open windows and an extractor fan help, and it soon fades.

Can you redo an old repair?

Yes. We remove the old filler and start again. Mention it when you send photos.

Do you hold any accreditations?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Can you price it without visiting?

Typically, yes. A close-up and a wider photo are enough to give a fixed quote.

What happens if you find more damage?

We will show you and explain before doing anything extra. Nothing extra is done without your say-so.

Can tenants book a repair?

We can work for tenants, landlords or agents. Get your landlord’s agreement first.

How do I book?

Just photos, your postcode and a contact number. On the day, we only need access to the room.

Repair or replace: which is better?

A new bath brings a chain of other jobs: tiles along the rim usually crack when it comes out, the panel may not fit the new one, and a plumber has to disconnect and reconnect everything. A repair skips all of it. Repairs from £95, with every job priced individually. The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed quote from your pictures, so you know the cost before you book.

What you get with us

  • Most jobs done in one visit
  • A fixed quote before you book
  • One price list for the whole UK
  • Colours mixed by hand to suit your surface

Read our prices page and guide to resurfacing and replacement costs.

Can I fix it myself?

If you do try a kit, read the instructions carefully, and don’t use it until it has fully cured. If it fails, we can still put it right.

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

What your bath is made of matters

Composite and resin

Composite baths are dense and solid, and frequently freestanding. Chips and scratches are filled and matched, in much the same way.

Pressed steel

Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so repair chips early.

Where we work around Stocking

Stocking is about 4 miles north of Ross-on-Wye, in Herefordshire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Stocking is one of 255 towns and villages in Herefordshire we cover. We work right across the region, from Stocking to Birmingham (about 44 miles away).

Jobs in HR1 are booked in the same way as anywhere else. If you are just outside Stocking, we cover Crossway (1 mile north), Old Gore (1 mile south), Lyne Down (2 miles east), Brampton Abbotts (3 miles south) and Ross-on-Wye (4 miles south). Larger places within reach include Hereford (9 miles north-west), Ledbury (7 miles north-east), Redhill (9 miles north-west), Newton Farm (9 miles north-west), Merrivale (5 miles south) and Whitecross (10 miles north-west).

Local landmarks in Stocking

Typical jobs here are in homes near Yatton Chapel, among other places. Well-known places in the area include Ross on Wye Hospital (4.4 miles south) and How Caple Mound (0.6 miles west). For a walk, there is Lea and Pagets Wood.

Map of Stocking © OpenStreetMap contributors

The process

It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, and get on with the job, which normally takes two to three hours for most chips. If anything looks different from your photos, we will talk to you before going ahead.

  1. First, we check the damage against your photos and agree the plan.
  2. Any rust and loose material comes out, and the area is degreased.
  3. We build up the filler in layers, shaping it to the bath.
  4. We tint the finish by hand to match the bath.
  5. Finally, it’s polished to match the shine and left to cure.

Getting ready for the visit

  • Tell us if there are stairs or a lift
  • Keep pets and children out of the room while we work
  • Mention any parking restrictions or tricky access

Get a quote

Most clients in Stocking get their price from pictures. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.

Send pictures for a quote

Advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.