Rutland · England
Bath Repair for Stoke Dry homes
Problem with your bath in Stoke Dry? We put it right where it is, match it on site and guarantee the work for a year.
- Repairs from £95
- Rust spots around the plughole
- A failed DIY repair that is discoloured or lifting
How we handle bath repair in Stoke Dry
Most bath damage, from chips and cracks to rust spots and holes, is repaired in place. There’s no plumbing to disconnect, the tiles are not touched, and the repaired area is colour-matched so it blends in. Whether it’s chips caused by builders and rust by the waste and overflow, we can typically put it right.
We stand behind the work with a one-year guarantee, so you are covered after the visit.
- Location
- Stoke Dry (LE15)
- Region
- Rutland
- Guarantee
- A year, on every repair
- Quote
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
When to call us in Stoke Dry
Most bath damage comes from something dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On steel and cast iron baths, any chip down to the metal will start to rust.
The most common problems we’re called about are:
- A cracked acrylic bath
- Chips under the taps
- Chips along the edge of the bath
- Impact holes in acrylic
Before booking anyone
- Whether a trained technician does the job
- Whether there are any call-out or travel charges
- What the guarantee covers, and for how long
- How changes to the job are handled
What bath repair costs
Prices start from £95. We charge the same across the UK, including Stoke Dry. What changes the price is:
- How easy the damage is to reach
- Whether old repairs or coatings need taking off
- Unusual colours or finishes
- The type of damage
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.
Getting a price from photos
You can normally get a fixed price without us visiting. To make it quick:
- Any earlier repairs or coatings
- One sharp close-up of the damage
- What it’s made of, if you know
- Your postcode, so we can check dates
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Keeping it looking good
Good habits make a big difference to how long a repair lasts:
- Put a towel in the bath if you are working above it
- Have new chips seen to early
- Rinse the bath after use, especially in hard water areas
- Use a soft cloth and washing-up liquid for everyday cleaning
Don’t leave razors, cans or hair grips in the bath, because they can mark the enamel. A dripping tap should be fixed early, too.
A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.
Your questions about bath repair in Stoke Dry
Can you repair a crack in an acrylic bath?
Frequently, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a picture.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Are there extra charges for Stoke Dry?
We don’t add a call-out fee. Your fixed price includes everything.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
Will the repair show?
The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath.
How long does the repair take to cure?
Most baths can be used the next day. We confirm the time before we leave.
Do you repair coloured baths?
Yes, coloured baths are no problem. The colour is tinted by hand on the day.
Do you work in Stoke Dry?
Yes, we do. We send a technician to Stoke Dry for every job, and the price is the same as everywhere else.
Materials and what they mean for the repair
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so early repairs matter.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There is no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Places near Stoke Dry
What else we do in Stoke Dry
How the visit works
Visits start with a quick look at the job together. Then the area is sheeted and masked and the work begins. Allow a few hours, depending on the damage, and we’ll tell you if anything changes.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, usually the day after.
How to prepare
- Keep children and pets away from the room on the day
- Move bottles, mats and clutter away from the area
- Keep a parking space free if you can
Get a quote
Most customers in Stoke Dry get their price from pictures. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Related advice
Repair or replace in Stoke Dry?
Replacing a fitted bath typically means a plumber, lifting out the old bath, making good the tiles and panel and getting rid of the old bath. Repairing it deals only with the damage in a single visit. Prices start from £95. We charge the same wherever you are, with no extra for Stoke Dry. The job itself decides the price: how much damage, what it’s made of and how many items.
Why book with us
- CHAS and Constructionline accredited
- Straight answers about what a repair can do
- No need to remove anything
- Dust sheets down, tidy finish
Take a look at our pricing and resurfacing vs replacement cost guide.
Honest limits
A repair is not always the answer, and we’d rather say so up front. Repairs won’t solve:
- Cracks in acrylic we cannot reach from underneath
- Rust that has eaten right through a steel bath
- A bath that moves underfoot, until its support is fixed
If in doubt, send photos and we’ll say what we think.
What we work on
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
DIY kit or professional repair?
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
About Stoke Dry
Stoke Dry is about 6 miles north of Corby, in Rutland. Book a date that suits you, and you will know when to expect us, so you’re not left waiting in all day. Stoke Dry is one of 47 towns and villages in Rutland we cover. Our nearest city page is Birmingham, about 51 miles away.
We work across LE15 and the streets around it. Streets in the area include Grange Lane and Seaton Road. We also travel to Seaton (1 mile east), Bisbrooke (1 mile north-west), Thorpe by Water (1 mile south), Glaston (1 mile north) and Harringworth (2 miles south-east). Larger places within reach include Oakham (7 miles north), Barleythorpe (8 miles north), Cottesmore (10 miles north), Langham (8 miles north), North Luffenham (4 miles north-east) and Whissendine (11 miles north).
Around Stoke Dry
We visit homes around Church of All Hallows and Uppingham Community College. A little further out are Rockingham Castle (4.7 miles south). For a walk, there’s King's Hill and Great Merrible Wood.
About our accreditations · Every repair comes with a one-year guarantee.
