Somerset · England
Bath Repair in Stoke Trister
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Stoke Trister. Send photos for a free, fixed quote.
- Repairs from £95
- A kit repair that didn’t last
- Damage beneath the taps
DIY repairs versus a professional job
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Bath repair in Stoke Trister, done in place
A typical bath repair is a few hours’ work, and the bath is back in use the following day. There’s no need to book a plumber or tiler, because nothing is disconnected. Typical jobs include an old repair that has yellowed or come loose and snagging damage from a refit, in acrylic, cast iron enamel and whirlpool & spa baths.
Every job is backed for twelve months in Stoke Trister and everywhere else. We return to put right any problem with the work.
- Area
- Stoke Trister (BA9)
- Region
- Somerset
- Guarantee
- One year on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What affects the price in Stoke Trister
Repairs from £95. There is no area surcharge for Stoke Trister. The price reflects:
- The material and finish
- Previous DIY repairs that have to come out
- Doing more than one item at once
- What kind of damage it is
We charge the same wherever you are, with no extra for Stoke Trister. What changes the price is the job itself: the material, the amount of damage and how many items.
How to get a fixed price
Photographing the damage takes a minute, and it saves a visit. Please include:
- The material, if you know it
- A close-up of the damage, in focus
- Daylight if possible, and no flash reflection
- Something in shot to show the size
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Your questions about bath repair in Stoke Trister
Are there extra charges for Stoke Trister?
We don’t add a call-out fee. The fixed price covers the visit and the work.
How do I book?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
Can you repair a chip on a coloured bath?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
How much does bath repair cost in Stoke Trister?
Prices start from £95. We give a fixed quote from your pictures. Send a close-up and a picture of the whole item with your BA9 postcode.
Can you repair a crack in an acrylic bath?
Typically, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a picture.
Is a bath repair durable?
It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.
Is my repair covered?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Do I need to be at home?
We need someone to let us in. You do not need to watch us work.
Also near Stoke Trister
Other services in Stoke Trister
Work for landlords and builders
We work for landlords, letting agents and housing providers in Stoke Trister as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Covering Stoke Trister
Stoke Trister is about 12 miles south of Frome, in Somerset. Jobs in Stoke Trister are booked in like any other job: a fixed quote from pictures, then a visit to do the work. Stoke Trister is one of 640 places in Somerset we cover.
Every address in BA9 is within our area, from the main roads to the quietest streets. If you are just outside Stoke Trister, we cover Southmarsh (1 mile north), Cucklington (2 miles south-east), Charlton Musgrove (2 miles north), Penselwood (2 miles north-east) and Pear Ash (2 miles north-east). Larger places within reach include Yeovil (14 miles south-west), Frome (12 miles north), Shepton Mallet (12 miles north-west), Castle Cary (6 miles west), Preston Plucknett (15 miles south-west) and Bruton (5 miles north-west).
What’s near Stoke Trister
Our clients here include homes close to King Arthur's Community School, The Unicorn Inn and Church of St Andrew. The nearest railway station is Templecombe station, about 4.2 miles south-west of the centre. Other landmarks nearby include Ballands Castle (1.8 miles north-east) and Four Towers (2.8 miles north). Green spaces nearby include Aaron's Hill.
How to care for the repair
A little care keeps the finish looking good. Our advice:
- Rinse it down after each bath
- A dripping tap stains enamel, so fix it early
- Don’t scrub with anything abrasive
- Stick to mild cleaners and a soft cloth
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine.
If water is getting through a crack, stop using the bath. Leaks under a bath can damage floors and ceilings.
When to call us in Stoke Trister
Acrylic baths that crack nearly always have a support problem. Legs that are not adjusted, a missing cradle or a soft floor let the bath move until the acrylic gives way.
Typical reasons for a call-out include:
- Rust spots around the plughole
- A chipped rim or side
- Scratches you can feel with a fingernail
- Chips under the taps
What to look for in a quote
- How to look after the finish
- How long it needs to cure
- What the guarantee covers, and for how long
- Whether the colour is mixed to match
What your bath is made of matters
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, in much the same way.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so early repairs matter.
How it works
Here’s how a visit generally runs: we arrive at the agreed slot, protect everything around the work area, carry out the work and tidy away. Allow a few hours, depending on the damage from start to finish. Before we go, we’ll explain when it can be used and how to care for it.
- First, we check the damage against your pictures and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Preparing for the visit
- Clear the area around the damage
- Let the surface dry out before the visit
- Have somewhere for us to park nearby if possible
Get a quote
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Read more
What we cannot put right
We would rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Cracks in acrylic we can’t reach from underneath
- Water coming from the waste or taps rather than the bath
If in doubt, send photos and we will say what we think.
Materials we work on in Stoke Trister
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
About our accreditations · Every repair comes with a one-year guarantee.
