Somerset · England
Bath Repair in Bruton
We travel to Bruton for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- Chips under the taps
- Impact holes in acrylic
How we handle bath repair in Bruton
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. If you’re dealing with damage done while the bathroom was being fitted and cracks in an acrylic bath, we can generally put it right, on whirlpool & spa baths, cast iron enamel and acrylic alike.
We stand behind the work with a one-year guarantee, so you’re covered after the visit.
- Location
- Bruton (BA10)
- County
- Somerset
- Cover
- 12 months on all our work
- Quote
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
How the visit works
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we will get on with it. The job generally runs to a few hours, depending on the damage, including clearing up.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Before we arrive
- Clear toiletries, mats and anything else from around the area
- Tell us about parking, stairs or access
- Plan for the room to be out of bounds to pets and children
Ask for a price
The quickest way to a price is to send two or three photos using our quote form or call us. We’ll say immediately whether it can be repaired.
Advice
Also near Bruton
Also in Bruton
Common questions in Bruton
Is it safe with children and pets around?
Just keep them out of the work area. We’ll tell you when the room can be used again.
I rent my home. Can I book you?
Yes. Check with your landlord; we can send the quote to them too.
Can I get a quote without a visit?
In nearly every case. If pictures do not show enough, we will ask for another angle.
Do you repair coloured baths?
Yes. The colour is mixed on site to suit your bath, including pastel and older colours.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Are there extra charges for Bruton?
Travel is included in the price, with the same prices everywhere we work.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Is repairing better than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
Covering Bruton
Bruton is about 10 miles south-west of Frome, in Somerset. We agree a date that works for you, and you will know when to expect us, so you are not left waiting in all day. Bruton is one of 640 towns and villages in Somerset we cover.
We cover every part of BA10 and the streets around it. From High Street, Warren Close and Higher Backway or a nearby road, we can come to you. Main roads around Bruton include the A359 and B3081, so getting to you is simple. We also travel to Cole (1 mile south-west), Wyke Champflower (1 mile west), Lamyatt (2 miles west), Batcombe (3 miles north) and Westcombe (3 miles north). We also work in nearby towns such as Yeovil (14 miles south-west), Frome (10 miles north-east), Wells (11 miles north-west), Midsomer Norton (12 miles north), Shepton Mallet (7 miles north-west) and Street (13 miles west).
Around Bruton
We visit homes around Sexey's School, Bruton Primary School and Church of St Mary. Bruton has its own railway station: Bruton station. Open spaces near Bruton include Lamyatt Beacon.
When a repair isn’t the answer
Some problems need a builder, plumber or fitter rather than us:
- A bath that moves underfoot, until its support is fixed
- Cracks in acrylic we cannot reach from underneath
- A whole bath that is dull or worn, where a full re-enamel is the better fix
Send us photos and we will tell you honestly before booking.
Materials we work on in Bruton
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
- Acrylic
Materials and what they mean for the repair
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, particularly by the plughole, so early repairs matter.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They do not rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Keeping it looking good
Most damage we see is avoidable. A few tips:
- Make sure an acrylic bath is firm underfoot
- Clean with warm water and a mild detergent
- Don’t scrub with anything abrasive
- Rinse it down after each bath
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine without abrasive products.
Tape over a fresh chip or crack until it’s repaired, so water cannot get in. Take it off before we arrive.
Work for landlords and builders
For developers and builders, we fix damage before handover. We can visit several plots in one trip.
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Repairing versus replacing in Bruton
People frequently assume a cracked or chipped bath has to come out. Generally it doesn’t: a repair keeps the bath in service for years, and costs far less than the disruption of a replacement. Prices start from £95. The price reflects the work involved, not your postcode. The full price is agreed before you book, with no extras added later.
Why Bruton customers choose us
- Nothing taken out or refitted
- Technicians who travel to you, UK-wide
- Colours mixed by hand to suit your surface
- A fixed quote before you book
See our prices page or resurfacing vs replacement cost guide.
What affects the price in Bruton
Repairs from £95. You’ll know the full cost before booking. We take into account:
- How much damage there is
- The material
- Access to the area
- Previous DIY repairs that have to come out
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
How to get a fixed price
Almost every job we do is priced from pictures. This is what to send:
- A close-up of the damage, in focus
- One picture of the entire bath
- What it’s made of, if you know
- Something in shot to show the size
If you are in Bruton and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
When to call us in Bruton
Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.
If you can see any of these, send us a picture:
- Scuffs and scratches in the surface
- A chip where the taps sit
- A failed DIY repair that’s discoloured or lifting
- Chips on the rim or sides
Before booking anyone
- What happens if the damage is worse than the photos show
- A fixed price, and whether VAT is included
- Aftercare advice
- When it can be used again
About our accreditations · Every repair comes with a one-year guarantee.
