Buckinghamshire · England
Bath Repair in Stokenchurch
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Stokenchurch and across Buckinghamshire. Free, fixed quotes from your photos.
- Repairs from £95
- An old repair that has yellowed or come loose
- A chipped rim or side
Bath repair in Stokenchurch, done in place
Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, normally in one visit. Common call-outs are for holes from dropped items and snagging damage from a refit, in roll-top & freestanding, pressed steel enamel and acrylic.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Where
- Stokenchurch (HP14)
- Area hub
- Buckinghamshire
- Guarantee
- One year on every repair
- Quote
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
For landlords and businesses
Housing associations and facilities teams use us for planned and reactive repairs in Buckinghamshire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
Looking after it afterwards
Nothing complicated is needed:
- If an acrylic bath flexes, have its feet adjusted
- Protect the bath with a towel when doing jobs nearby
- Use a soft cloth and washing-up liquid for everyday cleaning
- Don’t scrub with anything abrasive
Leave the repair to cure for as long as we say before running a bath. After that, gentle cleaning keeps it looking good.
Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Take it off before we arrive.
Common problems we fix in Stokenchurch
Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.
If you can see any of these, send us a picture:
- Hairline or through cracks in acrylic
- A chipped rim or side
- A hole punched through by something heavy
- Rust spots around the plughole
Before you book anyone
- How changes to the job are handled
- What protection goes down before work starts
- How to look after the finish
- How soon you can use it again
Also near Stokenchurch
Also in Stokenchurch
Stokenchurch questions
Can you repair a hole in a bath?
Usually. Send us a photo of the hole and one from under the bath if you can.
Will I be able to see the repair?
The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath, and we will tell you what to expect.
Is there a guarantee?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
It’s been repaired before. Can you still fix it?
Yes, regularly. It can add a little time, which we include in the quote.
How long does the repair take to cure?
Most baths can be used the next day. We’ll tell you the exact curing time when we finish.
How quickly can you book me in?
We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.
What information do you need?
Use the quote form or ring 0345 017 0787, and we’ll do the rest.
Do you charge for travel?
We don’t add a call-out fee. The fixed price covers the visit and the work.
The process
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and clear up. Plan for a few hours. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- Finish coats go on, then the repair is polished to blend in.
- Once it has cured, usually by the next day, the bath is ready to use.
Before we arrive
- Clear the area around the damage
- Open a window if you can
- Point us to the nearest place to park
Get a quote
Upload a picture of the damage and a wider shot of the whole item, with your HP14 postcode, and we will come back with a fixed quote.
Read more
About Stokenchurch
Stokenchurch is about 7 miles west of High Wycombe, in Buckinghamshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in 263 places across Buckinghamshire, from the larger towns to small villages. You can also see our page for London, about 36 miles away.
All of HP14 is within our area. That includes homes on Collyer Road, Slade Road and Parrs Road and the roads around them. Close by, we cover Waterend (1 mile east), Bennett End (1 mile north-east), Sprig's Alley (1 mile north), Beacon's Bottom (2 miles east) and Horsleys Green (2 miles south-east). Further out, we also cover Aylesbury (12 miles north), High Wycombe (7 miles east), Chesham (13 miles east), Marlow (8 miles south-east), Amersham (13 miles east) and Beaconsfield (11 miles east).
Around Stokenchurch
Locally, our jobs take us to homes close to Four Horseshoes pub, Stokenchurch Methodist Church and Stokenchurch Primary School, among other places. For rail, the closest station is Saunderton station, roughly 3.4 miles east. The countryside around Stokenchurch includes Bald Hill and Yoesden.
Why repair rather than replace?
A new bath costs more than the bath itself: taking out the old one, plumbing, tiling, a panel and redecorating. With a repair, it’s one visit and one price. Prices start from £95. We do not add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- Every repair guaranteed for a year
- CHAS and Constructionline accredited
- Colours mixed by hand to suit your surface
- One price list for the entire UK
Take a look at our prices page or guide to resurfacing and replacement costs.
What bath repair costs
Prices start from £95. There are no hourly rates or hidden extras. The price depends on:
- Any earlier repairs that need removing first
- How much damage there is
- The material and finish
- How hard the colour is to match
What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed price from your pictures, so you know the cost before you book.
Send photos for a quote
Photographing the damage takes a minute, and it saves a visit. Please include:
- A clear, close picture of the problem area
- Something in shot to show the size
- Where you are, by postcode
- Daylight if possible, and no flash reflection
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
A DIY attempt is not a disaster. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
Honest limits
Some jobs are not right for a repair, including:
- Water coming from the waste or taps rather than the bath
- Rust that has eaten right through a steel bath
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
If in doubt, send pictures and we’ll say what we think before you book.
What we work on
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
About our accreditations · Every repair comes with a one-year guarantee.
