Kent · England
Bath chip & crack repair in Stone Corner, Kent
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Stone Corner and across Kent. Send pictures for a free, fixed quote.
- Repairs from £95
- Chips caused by builders
- Chips under the taps
Our work in Stone Corner
Stone Corner is about 10 miles south-west of Ashford, in Kent. Clients in Stone Corner get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. We work in all 922 towns and villages in Kent, from the larger towns to small villages. Our nearest city page is London, about 48 miles away.
We cover every part of the TN30 postcode area. Nearby, we also work in Acton (1 mile south-west), The Stocks (1 mile south), Reading Street (1 mile north-east), Wittersham (1 mile south-west) and Stone in Oxney (2 miles east). Within a short drive, we also cover Ashford (10 miles north-east), Tenterden (3 miles north-west), Kennington (12 miles north-east), New Romney (10 miles east), Staplehurst (12 miles north-west) and Stanhope (9 miles north-east).
What’s near Stone Corner
The nearest railway station is Appledore (Kent) station, roughly 3.9 miles east. Other landmarks nearby include Smallhythe Place (1.4 miles north-west). The countryside around Stone Corner includes Flatropers Wood.
About our bath repair in Stone Corner
You do not need a new bath because of a chip. We fill the damage, shape it to the curve of the bath and refinish it, with the colour mixed on site so the repair is hard to spot. Typical jobs include hairline or through cracks in acrylic and chips caused by builders, on acrylic, roll-top & freestanding and cast iron enamel.
Big or small, you get the same one-year guarantee.
- Area
- Stone Corner (TN30)
- Area hub
- Kent
- Warranty
- A year, on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Honest limits
Not everything can be repaired, and we’d rather say so up front. We cannot fix:
- Cracks in acrylic we cannot reach from underneath
- Rust that has eaten right through a steel bath
- A whole bath that is dull or worn, where a full re-enamel is the better fix
Not sure? Send photos and we will give you a straight answer before booking.
Surfaces we repair
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
What happens on the day
Once we are through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the work takes a few hours, depending on what we find, and we finish by cleaning up and talking you through the result.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, usually the next day.
Getting ready for the visit
- Clear the area around the damage
- Open a window if you can
- Let us know if it has been repaired before
Getting a price
There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Read more
Should you replace it?
Replacing a bath rarely stops at the bath: tiles along the rim generally crack when it comes out, a new panel is often needed, and the plumbing has to be disconnected and refitted. A repair skips all of it. Prices start from £95. We charge the same wherever you are, so there’s no premium for Stone Corner. What changes the price is the job itself: the material, the amount of damage and how many items.
Why us?
- One price list for the whole UK
- A year’s guarantee on all work
- We come to you, anywhere in the UK
- Accredited with CHAS, Constructionline and SafeContractor
Take a look at our prices page or resurfacing vs replacement cost guide.
Looking after it afterwards
Much of the damage we repair could have been avoided. These habits help:
- A dripping tap stains enamel, so fix it early
- Avoid scourers, wire wool and gritty cream cleaners
- Make sure an acrylic bath is firm underfoot
- Get any new chip repaired before it rusts
Give the repair the full curing time we recommend before running a bath. From then on, mild cleaning is all it needs.
If water is getting through a crack, stop using the bath until it’s repaired. Leaks under a bath can damage floors and ceilings.
Can I fix it myself?
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
Landlords, agents and businesses in Stone Corner
Housing associations and facilities teams use us for planned and reactive repairs in Kent and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
How we price bath repair
Prices start from £95. There is no charge for travel to Stone Corner. The price comes down to:
- The size and number of damaged areas
- What the surface is made of
- How easy the damage is to reach
- Doing more than one item at once
There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Quotes from your pictures
We price nearly every job from pictures. This is what to send:
- One sharp close-up of the damage
- A coin beside the damage so we can judge size
- A picture taken from further back
- Good light, ideally daylight, without flash glare
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Nearby places to Stone Corner
More services for Stone Corner
Stone Corner: your questions answered
What information do you need?
Just pictures, your postcode and a contact number. On the day, access to the room.
Will the repair show?
The goal is a repair that blends in. The rest of the bath’s condition makes a difference, and we will tell you what to expect.
Can you redo an old repair?
Yes. We remove the old filler and start again. Mention it when you send photos.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit typically costs less than separate visits. Send photos of everything you’d like done.
Is there any odour?
A little, depending on the job. Ventilation keeps it to a minimum.
What does bath repair cost?
Repairs from £95. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Can you fix rust around the plughole?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
Is there a guarantee?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
About our accreditations · Every repair comes with a one-year guarantee.
