Gwynedd · Wales
Bath Repair in Tabor
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Tabor, with a one-year guarantee on every repair.
- Repairs from £95
- Holes from dropped items
- Scuffs and scratches in the surface
About our bath repair in Tabor
Whether your bath is steel, cast iron or acrylic, we can repair it. The method changes with the material: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Whether it’s a chipped rim or side and a chip where the taps sit, we can help.
All of our repairs are guaranteed for twelve months. If something goes wrong with the work, we come back.
- Where
- Tabor (LL40)
- Area hub
- Gwynedd
- Warranty
- One year on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Our work in Tabor
Tabor is about 25 miles north-east of Aberystwyth, in Gwynedd. Across the LL40 area, we carry out the work at your property. Tabor is one of 165 places in Gwynedd where we work. We work right across the region, from Tabor to Liverpool (60 miles away).
We work across LL40 and the streets around it. Nearby, we also work in Wenallt (1 mile west), Dolgellau (1 mile west), Llanelltyd (3 miles north-west), Rhydymain (4 miles north-east) and Aberllefenni (5 miles south). Within a short drive, we also cover Tywyn (15 miles south-west), Barmouth (9 miles west), Pen-dre (14 miles south-west), Harlech (14 miles north-west) and Fairbourne (9 miles west).
Landmarks near Tabor
Around Tabor, we work in homes near St Mark's Church and Ysgol y Gader. A little further out are Tŷ Siamas (1.4 miles west) and Dolgellau and Barmouth Hospital (1.3 miles west). Not far away are Pen y Bwlch-coch and Llyn Cynwch.
For landlords and businesses
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip.
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
When we’d advise against a repair
Honesty matters more than a booking, so here’s what a repair can’t fix:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- A bath worn all over, where resurfacing makes more sense
- Water coming from the waste or taps rather than the bath
Not sure? Send photos and we will give you a straight answer before booking.
Materials we work on in Tabor
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
How the visit works
You do not need to empty the room beforehand. Everything we use comes in the van with us, put protection down and start once you are happy with the plan. It normally takes a morning or an afternoon, and you can get on with other things while we are there.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the following day.
How to prepare
- Let us know about parking or access
- Keep a parking space free if you can
- Mention any earlier repairs or resurfacing
How to get a price
To get a price, send a couple of photos through our quote form or ring us. We’ll tell you honestly whether it can be repaired.
Advice
What bath repair costs
Repairs from £95. We charge the same across the UK, including Tabor. What changes the price is:
- What kind of damage it is
- How hard the colour is to match
- The size and number of damaged areas
- Previous DIY repairs that have to come out
We charge the same wherever you are, so there is no premium for Tabor. What changes the price is the job itself: how much damage, what it’s made of and how many items.
How to get a fixed quote
Phone pictures are fine. Just ensure we can see:
- Any earlier repairs or coatings
- Any details about the material
- Daylight if possible, and no flash reflection
- A clear, close picture of the problem area
Send us a picture of the damage and one of the whole item, and tell us you are in Tabor, and we’ll reply with a fixed quote.
Looking after it afterwards
Much of the damage we repair could have been avoided. A few tips:
- A dripping tap stains enamel, so fix it early
- Stick to mild cleaners and a soft cloth
- Have new chips seen to early
- Keep metal cans and razors off the surface
Leave the repair to cure for as long as we say before running a bath. From then on, mild cleaning is all it needs.
Stop using the bath if a crack lets water through until it’s repaired. Leaks under a bath can damage floors and ceilings.
Common problems we fix in Tabor
Baths take more knocks than people expect: everyday items get dropped into it all the time, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.
You may need us if you’ve spotted:
- A chipped rim or side
- A kit repair that didn’t last
- Deep scratches in acrylic
- Cracks in an acrylic bath
Comparing quotes
- Who turns up on the day
- What aftercare is recommended
- What happens if the damage is worse than the pictures show
- The length of the guarantee and what it covers
Materials and what they mean for the repair
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. A chip down to the iron can rust, but the bath itself lasts for generations, which makes it well worth repairing.
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches are filled and matched, just like other baths.
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Tabor: your questions answered
Can you quote from pictures?
In nearly every case. We only ask to see it in person if the pictures cannot show what we need.
Is a bath repair permanent?
Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps.
Can you repair a hole in a bath?
In most cases. Send us a picture of the hole and one from under the bath if you can.
What if the damage is worse than the photos show?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
Do you do work for letting agents?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Is it worth repairing rather than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
Are there extra charges for Tabor?
No. Our quotes include travel, with the same prices everywhere we work.
Can you repair a crack in an acrylic bath?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
Other services in Tabor
About our accreditations · Every repair comes with a one-year guarantee.
