Staffordshire · England
Bath Repair for Talke homes
Local bath repair for Talke: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Repairs from £95
- Cracks in an acrylic bath
- Rust spots around the plughole
Bath repair in Talke, done in place
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Typical jobs include scratches you can feel with a fingernail and a chip where the taps sit, in cast iron enamel, roll-top & freestanding and pressed steel enamel.
Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Area
- Talke (ST7)
- County
- Staffordshire
- Cover
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What we’re called out for in Talke
A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.
The most common problems we are called about are:
- Damage beneath the taps
- A hole punched through by something heavy
- Rusty patches near the plughole
- A failed DIY repair that’s discoloured or lifting
Comparing quotes
- What aftercare is recommended
- How changes to the job are handled
- Whether cleaning and preparation are in the price
- Whether the price covers travel
Repairs by material
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the body of the bath lasts a very long time, so it’s always worth repairing.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so early repairs matter.
Common questions in Talke
How long does the repair take to cure?
Typically the day after. We’ll tell you the exact curing time when we finish.
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
How quickly can you book me in?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Is it OK to have pets in the house?
Just keep them out of the work area. We will tell you when the room can be used again.
Can you repair something that’s been repaired before?
Usually, yes. We remove the old repair before doing a new one.
Is there any odour?
There may be a mild smell during the work, which fades afterwards.
Is repairing better than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
What happens once I’ve sent photos?
We come back with a fixed price. You are under no obligation.
Keeping it looking good
Nothing complicated is needed, just a few sensible habits:
- Make sure an acrylic bath is firm underfoot
- Keep abrasive pads and gritty cleaners away from the bath
- Rinse the bath after use, especially in hard water areas
- Clean with warm water and a mild detergent
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine, avoiding abrasives.
Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Remove it before the repair.
What we cannot put right
We will always be straight with you, so here’s what a repair can’t fix:
- Rust that has eaten right through a steel bath
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
Send us pictures and we’ll tell you honestly.
Surfaces we repair
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
What we do, step by step
Your technician turns up at the time we agreed with you, introduces themselves and checks the damage against your pictures first. Dust sheets and masking tape go down before we open a single tin. The work itself takes a morning or an afternoon, and the room is left clean and tidy.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the day after.
Preparing for the visit
- Avoid using the area for a few hours before we arrive
- Have somewhere for us to park nearby if possible
- Keep children and pets away from the room on the day
Getting a price
To get a price, send two or three pictures through our quote form or call us. We’ll tell you honestly whether it can be repaired.
Read more
Towns and villages near Talke
Also in Talke
Talke and the surrounding area
Talke is about 1 mile south-west of Kidsgrove, in Staffordshire. We visit homes and businesses in Talke and the surrounding area, so you don’t need to take anything anywhere. Talke is one of 512 towns and villages in Staffordshire where we work. Our jobs stretch from Talke to Manchester (about 28 miles away).
All of ST7 is within our area. Whether you live on Coalpit Hill, Thomas Street and Swan Close or a nearby road, a technician can come to you. Other places close to Talke include Hollins (1 mile north-east), Clough Hall (1 mile north), Butt Lane (1 mile north), Woodshutts (1 mile north-east) and Talke Pits (1 mile south). Larger places within reach include Newcastle-under-Lyme (4 miles south), Longton (8 miles south-east), Stone (13 miles south), Leek (10 miles east), Biddulph (5 miles north-east) and Cheadle (13 miles south-east).
Landmarks near Talke
We visit homes around The King's Church of England School, Caldwell Tavern and St Saviour's CofE Academy. The closest station to Talke is Kidsgrove station, about 0.9 miles north-east of the centre. Nearby you will also find Mow Cop Chapel Museum (2.8 miles north-east) and Audley and Bignall End (2.1 miles south-west). Open spaces near Talke include Bignall Hill and Westport Lake.
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
Repair or replace in Talke?
Replacing a bath rarely stops at the bath: tiles along the rim generally crack when it comes out, the panel may not fit the new one, and a plumber has to disconnect and reconnect everything. A repair skips all of it. Our bath repair starts from £95. The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed price from your pictures, so there are no surprises on the day.
Why us?
- Most jobs done in one visit
- Fixed prices from your pictures
- Colour mixed on the day to match
- Nothing taken out or refitted
Take a look at our full price list and bath cost comparison.
How we price bath repair
Repairs from £95. We charge the same across the UK, including Talke. What changes the price is:
- How easy the damage is to reach
- The type of damage
- What the surface is made of
- The colour and finish to match
We charge the same wherever you are, with no extra for Talke. What changes the price is the job itself: the material, the amount of damage and how many items.
Quotes from your photos
Photographing the damage takes a minute, and it saves a visit. Try to send:
- Something in shot to show the size
- The postcode, so we can plan the visit
- A wider photo showing the whole bath
- Any earlier repairs or coatings
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them to us. You’ll get a fixed quote, not an estimate.
About our accreditations · Every repair comes with a one-year guarantee.
