Isle of Anglesey · Wales
Bath chip & crack repair in Talwrn, Isle of Anglesey
We travel to Talwrn for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- Hairline or through cracks in acrylic
- A failed DIY repair that is discoloured or lifting
Bath repair at your home in Talwrn
Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. Nothing is unplumbed, the tiles aren’t touched, and the repaired area is colour-matched so it blends in. Our technicians work on cast iron enamel, acrylic and pressed steel enamel, and people most frequently call us about a chipped rim or side and snagging damage from a refit.
The work is covered for a year after we finish. Just call us if there’s a problem and we’ll sort it.
- Location
- Talwrn (LL77)
- County
- Isle of Anglesey
- Warranty
- 12 months on all our work
- Quote
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Common problems we fix in Talwrn
Glass and heavy bottles cause more chips than anything else. Taps and wastes cause problems too: water sits around them, and any chip there soon rusts.
Look out for any of the following:
- Chips along the edge of the bath
- Rusty patches near the plughole
- Scratches you can feel with a fingernail
- A chip where the taps sit
Comparing quotes
- What happens if the damage is worse than the photos show
- The length of the guarantee and what it covers
- If travel is included in the price
- Whether a trained technician does the job
Should you replace it?
Swapping a damaged bath for a new one normally involves a plumber, lifting out the old bath, re-tiling and a new panel and disposing of the old one. A repair deals only with the damage in a single visit. Repairs from £95, with every job priced individually. The price depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed quote from your pictures, so there are no surprises on the day.
Why us?
- Accredited with CHAS, Constructionline and SafeContractor
- Same prices wherever you are
- Most jobs done in one visit
- No need to remove anything
See our prices page and resurfacing vs replacement cost guide.
Materials and what they mean for the repair
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
FAQs for Talwrn
What if the damage is worse than the pictures show?
If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.
Can you repair a failed DIY repair?
Yes, we do this frequently. We strip it out, deal with any rust and repair it again.
What happens after I send photos?
We come back with a fixed price, typically with dates to choose from. You are under no obligation.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can I get a quote without a visit?
Usually, yes. Clear photos let us give you a fixed quote without visiting.
Can you repair a chip on a coloured bath?
Yes, we match coloured baths too. We tint the finish to your bath on site.
Is a holed acrylic bath repairable?
In most cases. Photos of the hole and the underside help us check.
Can pets and children be at home?
Just keep them out of the work area. We’ll tell you when the room can be used again.
Prices and what affects them
Prices start from £95. We price every job individually, from your pictures. What matters most is:
- The size and number of damaged areas
- What kind of damage it is
- Whether old repairs or coatings need taking off
- Whether we combine several jobs
A repair normally costs much less than people expect, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.
Getting a price from pictures
When you take your photos, these tips help us give you a firm price:
- Details of any past repairs
- Something in shot to show the size
- The postcode, so we can plan the visit
- The material, if you know it
The quickest way to a price is to send two or three pictures using our quote form or ring us. We will say right away if a repair is the right fix.
About Talwrn
Talwrn is about 6 miles north-west of Bangor, in Isle of Anglesey. From the centre of Talwrn to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Talwrn is one of 115 places in Isle of Anglesey we cover. Our jobs stretch from Talwrn to Liverpool (56 miles away).
Postcode districts we cover here: LL77. From Lon Llanffinan and Maes-y-Coed or a nearby road, we can come to you. We also cover the places around Talwrn: Pencraig (2 miles south-west), Penmynydd (2 miles south-east), Pentraeth (2 miles north-east), Plas Gwyn (2 miles east) and Pentre Berw (3 miles south). We also work in nearby towns such as Holyhead (15 miles west), Blackbridge (15 miles west), Menai Bridge (5 miles south-east), Porthaethwy (5 miles south-east), Amlwch (10 miles north) and Morawelon (15 miles west).
What’s near Talwrn
In Talwrn, that means homes near St Ffinan's Church and the streets around them. The closest station to Talwrn is Llanfairpwll station, roughly 4.1 miles south-east of the centre. Well-known places in the area include Bodeilio Weaving Centre (less than half a mile west) and Ynys Cefni (2.4 miles south-west). Open spaces near Talwrn include Bron Alar and Llyn Cadarn.
Landlord and trade work in Talwrn
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip.
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Nearby places to Talwrn
Also in Talwrn
What we do, step by step
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the work takes a few hours, depending on what we find, and we finish by cleaning up and talking you through the result.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the following day.
Before we arrive
- Tell us about parking, stairs or access
- Let us know which floor the room is on
- Point us to the nearest place to park
How to get a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price.
Read more
Honest limits
Some jobs aren’t right for a repair, for example:
- A steel bath rusted through
- Flexing caused by a failed cradle or loose feet
- Cracks in parts of an acrylic bath we cannot get to from below
Not sure? Send pictures and we’ll give you a straight answer before you book.
What we work on
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
Keeping it looking good
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Ensure an acrylic bath is firm underfoot
- Get a dripping tap fixed promptly
- Keep metal cans and razors off the surface
- Protect the bath with a towel when doing jobs nearby
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust sets in.
Tape over a fresh chip or crack until it’s repaired, so water can’t get in. Remove it before the repair.
About our accreditations · Every repair comes with a one-year guarantee.
