Barnsley · England
Bath Repair in Tankersley
Problem with your bath in Tankersley? We put it right where it is, match it on site and guarantee the work for a year.
- Repairs from £95
- Snagging damage from a refit
- Impact holes in acrylic
About our bath repair in Tankersley
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. If you’re dealing with a cracked acrylic bath and rusty patches near the plughole, we can normally put it right, whatever the material.
You get a one-year guarantee, the same in Tankersley as everywhere else we work.
- Area
- Tankersley (S75, S74)
- Area hub
- Barnsley
- Guarantee
- One year on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
How it works
Once we are through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes a few hours, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the next day.
How to prepare
- Plan for the room to be out of bounds to pets and children
- Ensure the area is dry
- Mention if the room is upstairs or in a flat
Getting a price
Send us a picture of the damage and a wider shot of the entire item, with your S75 postcode, and we will come back with a fixed quote.
Advice
When we’d advise against a repair
To be straight with you, some problems need a different fix:
- A bath worn all over, where resurfacing makes more sense
- Metal that has corroded all the way through
- Water coming from the waste or taps rather than the bath
Not sure? Send photos and we’ll give you a straight answer.
Surfaces we repair
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so repair chips early.
Landlords, agents and businesses in Tankersley
Housing associations and facilities teams use us for planned and reactive repairs in Barnsley and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
If you manage property in Tankersley, we can repair and quote for several addresses together. Send pictures for each one and we’ll price them together.
Questions from Tankersley
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work and until it has cured. The rest of the house is unaffected.
Something went through my bath. Can it be fixed?
In most cases. Send us a picture of the hole and one from under the bath if you can.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Which areas do you work in?
We cover the whole UK, including Tankersley and the rest of Barnsley. Send your postcode with your photos and we will confirm dates.
Is there a guarantee?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
Can you repair several things at once?
Of course, and it typically saves money. Send pictures of everything together and you’ll get one combined price.
When can you do it?
It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.
Where we work around Tankersley
Tankersley is about 4 miles south-west of Wombwell, in Barnsley. We agree a date that works for you, and you will know when to expect us, so you are not left waiting in all day. Tankersley is one of 94 towns and villages in Barnsley where we work. You can also see our page for Leeds, about 22 miles away.
Our repair technicians cover all of the S75 and S74 postcode area and the streets around it. From Thorncliff Way, New Road and The Grange or anywhere nearby, a technician can come to you. Nearby, we also work in Upper Tankersley (1 mile south-west), Hoyland (2 miles east), High Green (2 miles south), Harley (2 miles south-east) and Hood Hill (2 miles south-east). Further out, we also cover Barnsley (4 miles north), Wombwell (4 miles north-east), Wath upon Dearne (5 miles east), Shaw Lands (4 miles north), Worsbrough (3 miles north) and Wilthorpe (4 miles north).
Landmarks near Tankersley
Around Tankersley, we work in homes near St Paul, Tankersley St Peter's CofE (Aided) Primary School and Kirk Balk Academy. For rail, the closest station is Elsecar station, roughly 2.3 miles east. Further afield, we also cover the area around Worsbrough Mill Museum (2 miles north) and Kendray Hospital (3.5 miles north). For a walk, there is Greno Woods.
Signs you need bath repair in Tankersley
A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.
Send us a picture if you notice any of these:
- A chip where the taps sit
- Holes from dropped items
- Rust spots around the plughole
- Hairline or through cracks in acrylic
What your quote should include
- Who will actually do the work
- How the colour is matched
- What protection goes down before work starts
- Whether the price is fixed and includes VAT
Looking after it afterwards
Once the work has cured, treat it gently:
- Protect the bath with a towel when doing jobs nearby
- Check that an acrylic bath doesn’t move when you stand in it
- Avoid scourers, wire wool and gritty cream cleaners
- Rinse it down after each bath
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath without abrasive products.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and it can start to leak underneath.
DIY kit or professional repair?
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Towns and villages near Tankersley
More services for Tankersley
Repair or replace: which is better?
Replacing a bath rarely stops at the bath: tiles along the rim normally crack when it comes out, a new panel is frequently needed, and a plumber has to disconnect and reconnect everything. Repairing the damage avoids all of that. Prices start from £95. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why choose Surface Doctor in Tankersley
- Everything repaired in place
- Work done at your home or business
- No extra charge for your area
- CHAS and Constructionline accredited
Read our full price list or guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
