Barnsley · England
Bath Repair for Upper Tankersley homes
Chip and crack repairs to enamel, acrylic and cast iron baths in Upper Tankersley, carried out at your home and guaranteed for a year.
- Repairs from £95
- Rusty patches near the plughole
- Damage done while the bathroom was being fitted
What we do, step by step
The work is clean and fairly quiet. Protection goes down first, then the job itself takes a morning or an afternoon. Before we leave, we explain how soon it can be used and how to care for it.
- First, we check the damage against your pictures and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Preparing for the visit
- Let the surface dry out before the visit
- Let us know which floor the room is on
- Keep a parking space free if you can
Get a quote
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through.
Related advice
About our bath repair in Upper Tankersley
A typical bath repair is a few hours’ work, and you can normally bathe again the following day. You will not need a plumber or tiler, because nothing is disconnected. If you are dealing with chips caused by builders and scuffs and scratches in the surface, we can help, whatever the material.
A one-year guarantee comes as standard, so you are not left on your own once we have gone.
- Location
- Upper Tankersley (S75)
- Area hub
- Barnsley
- Cover
- 12 months on all our work
- Quote
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Looking after it afterwards
Looking after the surface is easy:
- A dripping tap stains enamel, so fix it early
- Don’t scrub with anything abrasive
- Give the bath a quick rinse after use
- Have new chips seen to early
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine without abrasive products.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.
Common problems we fix in Upper Tankersley
Most bath damage comes from something dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On steel and cast iron baths, any chip down to the metal will start to rust.
These are the problems we’re asked about most:
- Holes from dropped items
- Damage done while the bathroom was being fitted
- Chips along the edge of the bath
- A failed DIY repair that’s discoloured or lifting
Questions to ask before you book
- Is the price fixed, and does it include VAT?
- Aftercare advice
- Whether there are any call-out or travel charges
- How your room will be protected
Upper Tankersley and the surrounding area
Upper Tankersley is about 4 miles south of Barnsley, in Barnsley. Our technicians come to customers in Upper Tankersley, so you don’t need to take anything anywhere. Upper Tankersley is one of 94 towns and villages in Barnsley we cover. Our nearest city page is Leeds, about 22 miles away.
We work across the S75 postcode area and the streets around it. That includes homes on Stone Row Court, Stone Leigh and Wentworth Way and the roads around them. We also travel to Tankersley (1 mile north-east), High Green (2 miles south), Hoyland (2 miles east), Harley (2 miles south-east) and Hood Hill (2 miles south-east). Within a short drive, we also cover Barnsley (4 miles north), Wombwell (4 miles north-east), Wath upon Dearne (6 miles east), Shaw Lands (4 miles north), Worsbrough (3 miles north) and Wilthorpe (5 miles north).
Around Upper Tankersley
Around Upper Tankersley, we work in homes near Kirk Balk Academy, St Paul and Tankersley St Peter's CofE (Aided) Primary School. For rail, the closest station is Chapeltown station, roughly 2.4 miles south-east of the centre. Nearby you will also find Alhambra Shopping Centre (4 miles north) and Kendray Hospital (3.9 miles north-east). Green spaces nearby include Greno Woods.
Why repair rather than replace?
For damage in one or two places, a repair is the obvious choice. It costs far less than a new bath plus fitting, it takes one visit, and nothing else in the room changes. Prices start from £95. Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why choose Surface Doctor in Upper Tankersley
- Colour-matched on site
- Every repair guaranteed for a year
- We come to you, anywhere in the UK
- Accredited with CHAS, Constructionline and SafeContractor
Take a look at our prices page or guide to resurfacing and replacement costs.
When we would advise against a repair
Honesty matters more than a booking, so here’s what a repair won’t do:
- A bath that moves underfoot, until its support is fixed
- A steel bath rusted through
- Water coming from the waste or taps rather than the bath
If in doubt, send photos and we’ll say what we think before booking.
What we work on
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
Prices and what affects them
Repairs from £95. Each job gets its own fixed quote. These are the things that affect it:
- How easy the damage is to reach
- How hard the colour is to match
- Whether we combine several jobs
- Any earlier repairs that need removing first
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Getting a price from pictures
You can take the photos on your phone. Just make sure we can see:
- A photo taken from further back
- The material, if you know it
- A clear, close picture of the problem area
- Any earlier repairs or coatings
To get a price, send two or three photos through our quote form or call us. We’ll say straight away whether it can be repaired.
FAQs for Upper Tankersley
How do I book?
Some photos, your postcode and how to reach you. On the day, access to the room.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Can you repair something that is been repaired before?
Usually, yes. The old repair comes out first, so let us know about it.
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
When can you do it?
We will give you dates with your quote. If it’s urgent, say so and we will do what we can.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
When can I have a bath again?
Usually the following day. We confirm the time before we leave.
Can a cracked acrylic bath be fixed?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, in much the same way.
For landlords and businesses
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Towns and villages near Upper Tankersley
What else we do in Upper Tankersley
About our accreditations · Every repair comes with a one-year guarantee.
