Shropshire · England
Bath Repair in Tasley
Our technicians come to Tasley for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- Deep scratches in acrylic
- A hole punched through by something heavy
Bath repair in Tasley without replacing anything
Most bath damage, from chips and cracks to rust spots and holes, is repaired in place. Nothing is unplumbed, the tiles are not touched, and the repaired area is colour matched so it blends in. Typical jobs include rusty patches near the plughole and snagging damage from a refit, in pressed steel enamel, cast iron enamel and whirlpool & spa baths.
All our work comes with our one-year guarantee.
- Where
- Tasley (WV16)
- Region
- Shropshire
- Cover
- 12 months on all our work
- Quote
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Repairing versus replacing in Tasley
Many people think a damaged bath means a new one. Typically it does not: a repair keeps the bath in service for years, and costs far less than the disruption of a replacement. Our bath repair starts from £95. Our prices are the same across the UK, so there is no premium for Tasley. What changes the price is the job itself: the material, the amount of damage and how many items.
Why Tasley customers choose us
- A fixed quote before booking
- Technicians who travel to you, UK-wide
- Colour mixed on the day to match
- Accredited with CHAS, Constructionline and SafeContractor
Take a look at our full price list or resurfacing vs replacement cost guide.
Landlord and trade work in Tasley
Housing associations and facilities teams use us for planned and reactive repairs in Shropshire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
What we do, step by step
Arrival times are agreed in advance. Once we’re there, the work takes two to three hours for most chips in most cases. We leave the room clean and you’ll know when it can be used.
- First, we check the damage against your pictures and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Tell us about any previous repairs or coatings
- Make sure the area is dry
- Keep a parking space free if you can
Getting a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job.
Advice
Where we work around Tasley
Tasley is about 1 mile west of Bridgnorth, in Shropshire. Across the WV16 area, we come to you. We cover 433 places in Shropshire. You can also see our page for Birmingham, about 24 miles away.
Here we cover the WV16 postcode area. That includes homes on Church Lane and Roundthorn Close. If you are just outside Tasley, we cover Bridgnorth (1 mile east), Oldbury (1 mile south-east), Morville (2 miles west), Eardington (2 miles south-east) and Nordley (2 miles north). Further out, we also cover Madeley (7 miles north), Shifnal (9 miles north), Broseley (5 miles north), Albrighton (10 miles north-east), Church Stretton (15 miles west) and Much Wenlock (6 miles north-west).
What’s near Tasley
In Tasley, that means homes near Church of St Peter and St Paul, Oldbury Wells School and Castlefields Primary School, among other places. Well-known places in the area include Bridgnorth Castle (1.4 miles east) and Bridgnorth Community Hospital (1.2 miles east).
- Parks and local facilities nearby include Bridgnorth (1.4 miles east)
When we would advise against a repair
It helps to know what we can’t do:
- Water coming from the waste or taps rather than the bath
- Rust that has eaten right through a steel bath
- Wear across the entire surface, which needs re-enamelling
Send us pictures and we will tell you honestly before booking.
Materials we work on in Tasley
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Places near Tasley
Also in Tasley
Do you need bath repair in Tasley?
The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: the bath is not properly supported, so it flexes under weight.
The most common problems we are called about are:
- A hole punched through by something heavy
- Scratches you can feel with a fingernail
- A cracked acrylic bath
- A chipped rim or side
Questions to ask before you book
- How the room is protected while they work
- Whether cleaning and preparation are in the price
- The length of the guarantee and what it covers
- How changes to the job are handled
Keeping it looking good
Nothing complicated is needed, just a few sensible habits:
- Have new chips seen to early
- If an acrylic bath flexes, have its feet adjusted
- Avoid scourers, wire wool and gritty cream cleaners
- A dripping tap stains enamel, so fix it early
A repaired bath needs no special treatment. Skip bleach and gritty creams.
A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.
Different materials, different repairs
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.
Your questions about bath repair in Tasley
Is a cracked acrylic bath repairable?
Generally, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a photo.
It’s been repaired before. Can you still fix it?
Yes, we often do. Removing the old work can add time, and that’s in the quote.
Do you repair coloured baths?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
What do you need from me?
A close-up, a wider photo and your postcode. After that, we just agree a date.
What happens next?
We look at the pictures and reply with a fixed quote and some dates. If we need another angle, we will ask.
What happens if you find more damage?
We will show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.
Are there extra charges for Tasley?
We do not add a call-out fee. The fixed quote covers the visit and the work.
Can tenants book a repair?
Of course. Ask your landlord first, and we can send them the quote if that helps.
About our accreditations · Every repair comes with a one-year guarantee.
