Shropshire · England
Bath Repair in Morville
Chip and crack repairs to enamel, acrylic and cast iron baths in Morville, carried out at your home and guaranteed for a year.
- Repairs from £95
- Deep scratches in acrylic
- Chips under the taps
How we handle bath repair in Morville
We see every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. All of it is repaired where the bath stands. If you are dealing with chips caused by builders and rust spots around the plughole, we can typically put it right, on acrylic, roll-top & freestanding and cast iron enamel alike.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.
- Area
- Morville (WV16)
- Region
- Shropshire
- Warranty
- A year, on every repair
- Quotes
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
How to care for the repair
Looking after the surface is easy, and it makes a real difference:
- Do not leave a fresh chip for long
- Clean with warm water and a mild detergent
- Do not scrub with anything abrasive
- Rinse it down after each bath
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine without abrasive products.
Until we visit, a strip of waterproof tape over the damage helps, so water can’t get in. Remove it before the repair.
What we do, step by step
Your technician turns up when we said we would and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. The work itself takes two to three hours for most chips, and we leave the room as we found it.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the next day.
Before we arrive
- Keep pets and children out of the room while we work
- Clear toiletries, mats and anything else from around the area
- Let us know if it has been repaired before
How to get a price
The quickest way to a price is to send two or three photos using our quote form or call us. We will tell you honestly if a repair is the right fix.
Related advice
Towns and villages near Morville
What else we do in Morville
What a repair can’t fix
Honesty matters more than a booking, so here’s what a repair won’t do:
- Rust that has eaten right through a steel bath
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Leaks from the waste or overflow fittings (a plumber’s job)
Send us photos and we’ll tell you honestly before booking.
Surfaces we repair
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
What affects the price in Morville
Repairs from £95. You’ll know the full cost before booking. We take into account:
- Doing more than one item at once
- What the surface is made of
- Access to the area
- The size and number of damaged areas
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access.
Send photos for a quote
We price nearly every job from pictures. This is what we need:
- Good light, ideally daylight, without flash glare
- A clear, close picture of the problem area
- The material, if you know it
- Whether it’s been repaired or coated before
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
Signs you need bath repair in Morville
The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.
Most people get in touch after spotting one of these:
- Rust by the waste and overflow
- Impact holes in acrylic
- A kit repair that didn’t last
- Snagging damage from a refit
What to look for in a quote
- Whether the price covers travel
- How to care for the finish
- When it can be used again
- Whether the colour is mixed to match
Morville and nearby
Morville is about 3 miles west of Bridgnorth, in Shropshire. From the centre of Morville to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. We work in all 433 towns and villages in Shropshire. Our nearest city page is Birmingham, about 26 miles away.
Here we cover the WV16 postcode area. Streets in the area include St Gregorys Close, Ludlow Road and Prestwich Close. If you’re just outside Morville, we cover Tasley (2 miles east), Nordley (2 miles north-east), Linley Brook (2 miles north), The Down (3 miles south) and Linley (3 miles north). We also work in nearby towns such as Madeley (7 miles north), Coleham (15 miles north-west), Ludlow (15 miles south-west), Belle Vue (15 miles north-west), Shifnal (10 miles north-east) and Sutton (14 miles north-west).
Around Morville
Typical jobs here are in homes near The Acton Arms, Church of St Gregory and Morville CofE (Controlled) Primary School, among other places. A little further out are Bridgnorth Community Hospital (2.8 miles east) and Bridgnorth Castle (3 miles east).
Your questions about bath repair in Morville
What do you need from me?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Is there a call-out fee?
There’s no separate call-out charge. Your fixed price includes everything.
Do you cover Morville?
Yes. We work across the UK and come to Morville. Send us pictures for a fixed quote, or call 0345 017 0787.
How do I get a price for bath repair in Morville?
Prices start from £95. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Something went through my bath. Can it be fixed?
Usually, yes, if we can reach behind it. The hole is backed, filled and refinished to match.
What if the damage is worse than the pictures show?
We will show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.
Will the repair show?
We aim for a repair you can’t easily find. The rest of the bath’s condition makes a difference.
Is a bath repair durable?
Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.
Materials and what they mean for the repair
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches are filled and matched, just like other baths.
Work for landlords and builders
Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access.
DIY kit or professional repair?
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
A DIY attempt is not a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
About our accreditations · Every repair comes with a one-year guarantee.
