Somerset · England
Bath chip & crack repair in Templecombe, Somerset
We travel to Templecombe for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.
- Repairs from £95
- Scuffs and scratches in the surface
- Impact holes in acrylic
Bath repair in Templecombe, done in place
We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath. You can usually use the bath the next day. If you are dealing with rust by the waste and overflow and scratches you can feel with a fingernail, we can normally put it right.
We stand behind the work with a one-year guarantee, so you are covered after the visit.
- Location
- Templecombe (BA8)
- Area hub
- Somerset
- Guarantee
- A year, on every repair
- Price
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What we cannot put right
Some problems need a builder, plumber or fitter rather than us:
- Leaks from the waste or overflow fittings (a plumber’s job)
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Flexing caused by a failed cradle or loose feet
Send us photos and we will tell you honestly.
Surfaces we repair
- Pressed steel enamel
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
Places near Templecombe
What else we do in Templecombe
When to call us in Templecombe
Most bath damage comes from something dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On steel and cast iron baths, a chip that reaches the metal lets water in, and rust follows.
Most people contact us when they notice something like this:
- Rust spots around the plughole
- Snagging damage from a refit
- A chip where the taps sit
- An old repair that has yellowed or come loose
Comparing quotes
- When it can be used again
- Whether a trained technician does the job
- Whether the price is fixed and includes VAT
- What prep work is covered
Prices and what affects them
Prices start from £95. You’ll know the full cost before booking. We take into account:
- Whether it’s a chip, crack, burn or wear
- Whether we combine several jobs
- Previous DIY repairs that have to come out
- The material
We don’t add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Send pictures for a quote
Before you send photos, these tips help us give you a firm price:
- One picture of the entire bath
- Something in shot to show the size
- Whether it’s been repaired or coated before
- Natural light rather than flash
Send us pictures of the damage and one of the entire item, and tell us you’re in Templecombe, and we’ll come back with a fixed quote.
Can I fix it myself?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Templecombe: your questions answered
Is there any odour?
It depends on the job, but frequently a little. Open windows and an extractor fan help, and it soon fades.
How do I book?
Use the quote form or ring 0345 017 0787, and we’ll take it from there.
Can you fix rust around the plughole?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit usually costs less than separate visits. Include pictures of each item.
Is there a guarantee?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Can you redo an old repair?
Yes. We take out the old repair and do it properly. Mention it when you send photos.
Do you cover the entire of Somerset?
Across the UK, and that includes Templecombe. Prices don’t change with location.
Can you redo someone else’s repair?
Yes, regularly. Removing the old work can add time, and that is in the quote.
How to look after the repair
Nothing complicated is needed, just a few sensible habits:
- Don’t leave razors or cans standing in the bath
- Don’t leave a fresh chip for long
- Rinse it down after each bath
- Put a towel in the bath if you are working above it
Do not leave razors, cans or hair grips in the bath, as they can leave rust marks. A dripping tap should be fixed early, too.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and it can start to leak underneath.
What happens on the day
Visits start with a quick look at the job together. Then the area is sheeted and masked and we start. Allow a few hours, depending on the damage, and we will tell you if anything changes.
- First, we check the damage against your photos and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Before we arrive
- Keep pets and children out of the room while we work
- Mention if the room is upstairs or in a flat
- Let us know about parking or access
Ask for a price
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you will get a fixed quote back. Quotes are free and you’re under no obligation.
Related advice
Templecombe and the surrounding area
Templecombe is about 11 miles east of Yeovil, in Somerset. Jobs in Templecombe are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. We cover all 640 towns and villages in Somerset.
Postcode districts we cover here: BA8. Whether you live on High Street, Vine Street and Merthyr Guest Close or anywhere nearby, we can come to you. Nearby, we also work in Yenston (1 mile south-east), Henstridge Bowden (1 mile south-west), Milborne Wick (3 miles south-west), Milborne Port (3 miles south-west) and Purse Caundle (3 miles south). Within a short drive, we also cover Yeovil (11 miles west), Shepton Mallet (14 miles north-west), Wincanton (4 miles north), Somerton (15 miles west), Castle Cary (8 miles north-west) and Preston Plucknett (11 miles west).
Around Templecombe
We visit homes around Church of St Mary and Abbas and Templecombe Church of England Primary School and the streets around them. There’s a railway station in Templecombe itself: Templecombe station.
Should you replace it?
For damage in one or two places, a repair is the obvious choice. It costs far less than a new bath plus fitting, it takes one visit, and the bathroom stays exactly as it is. Prices start from £95. The price reflects the work involved, not where you live. You will see the full price before booking, with no extras added later.
What you get with us
- Nothing taken out or refitted
- We leave the room as we found it
- No extra charge for your area
- Free fixed quotes from pictures
Read our pricing or resurfacing vs replacement cost guide.
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
We’re used to working with agents and managing companies. Just send pictures, the address and how to get access.
About our accreditations · Every repair comes with a one-year guarantee.
