Nottinghamshire · England
Bath Repair for Teversal homes
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Teversal, with a one-year guarantee on every repair.
- Repairs from £95
- Impact holes in acrylic
- Snagging damage from a refit
Questions from Teversal
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the pictures cannot show what we need.
It’s been repaired before. Can you still fix it?
Yes, we frequently do. It can add a little time, which we include in the quote.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
I tried a repair kit. Can you fix it?
Yes. We remove the old filler and start again. Mention it when you send pictures.
Do you repair coloured baths?
Yes. The colour is mixed on site to suit your bath, including older coloured suites.
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted before the end of a tenancy.
What happens once I’ve sent pictures?
We come back with a fixed quote, typically with dates to choose from. There’s no obligation to book.
Can you fix rust around the plughole?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
Bath repair in Teversal without replacing anything
A repair fixes just the damaged area and blends it into the rest of the bath, which costs far less than replacing a fitted bath. Most baths can be used again the following day. We regularly repair roll-top & freestanding, acrylic and cast iron enamel, and common reasons people contact us are an old repair that has yellowed or come loose and rust by the waste and overflow.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.
- Area
- Teversal (NG17)
- County
- Nottinghamshire
- Cover
- 12 months on all our work
- Price
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
How to look after the repair
After the repair has cured, a few habits help it last:
- Have new chips seen to early
- Clean with warm water and a mild detergent
- Do not leave razors or cans standing in the bath
- A dripping tap stains enamel, so fix it early
Do not leave razors, cans or hair grips in the bath, because they can mark the enamel. A dripping tap should be fixed early, too.
Do not leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.
Where we work around Teversal
Teversal is about 2 miles north-west of Sutton in Ashfield, in Nottinghamshire. Book a date that suits you, and you’ll know when to expect us, so you are not left waiting in all day. We work in all 329 towns and villages in Nottinghamshire. You can also see our page for Manchester, about 45 miles away.
Jobs in NG17 are booked in the same way as anywhere else. We also cover the places around Teversal: Skegby (1 mile south-east), Fackley (1 mile south-west), Stanton Hill (1 mile south), Pleasley (2 miles north-east) and Sutton in Ashfield (2 miles south-east). Within a short drive, we also cover Mansfield (4 miles east), Carlton (15 miles south-east), Worksop (13 miles north-east), Hucknall (9 miles south), Mansfield Woodhouse (4 miles east) and Netherfield (15 miles south-east).
Landmarks near Teversal
Our customers here include homes close to Healdswood Infants' and Nursery School, Quarrydale Academy and St. Katherine's Church, among other places. The nearest railway station is Sutton Parkway station, roughly 3 miles south-east of the centre. A little further out are Stainsby Mill (2.7 miles north-west) and Designer Outlet East Midlands (3.4 miles south-west).
Repair or replace in Teversal?
When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. Where the entire surface is tired, we may suggest re-enamelling instead. Repairs from £95, with every job priced individually. The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your pictures, so you know the cost before booking.
Why Teversal customers choose us
- No extra charge for your area
- Colour mixed on the day to match
- We leave the room as we found it
- A fixed quote before you book
Take a look at our full price list and guide to resurfacing and replacement costs.
Materials and what they mean for the repair
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There is no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
What a repair can’t fix
A repair isn’t always the answer, and we’ll tell you before we start. We cannot fix:
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- A steel bath rusted through
- Cracks in acrylic we cannot reach from underneath
If in doubt, send photos and we will say what we think.
What we work on
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
The process
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job normally takes two to three hours for most chips. We tidy up before we leave and let you know when you can use it again.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, usually the day after.
How to prepare
- Clear the area around the damage
- Ensure the area is dry
- Ensure the room can be ventilated
Ask for a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Related advice
What bath repair costs
Prices start from £95. Each job gets its own fixed price. These are the things that affect it:
- Whether it’s a chip, crack, burn or wear
- How easy the damage is to reach
- Doing more than one item at once
- Whether old repairs or coatings need taking off
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Getting a price from photos
Before you send pictures, a few simple things make all the difference:
- Something in shot to show the size
- Natural light rather than flash
- Where you are, by postcode
- Any earlier repairs or coatings
To get a price, send a couple of pictures through our quote form or call us. We’ll say right away if a repair is the right fix.
Landlords, agents and businesses in Teversal
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.
What we are called out for in Teversal
A cracked acrylic bath typically wasn’t supported properly. Loose legs, no proper cradle or a floor that gives let the base flex until the acrylic gives way.
Typical reasons for a call-out include:
- Rusty patches near the plughole
- A cracked acrylic bath
- A hole punched through by something heavy
- A kit repair that didn’t last
What to look for in a quote
- What aftercare is recommended
- A fixed price, and whether VAT is included
- Who will actually do the work
- If travel is included in the price
Nearby places to Teversal
Also in Teversal
About our accreditations · Every repair comes with a one-year guarantee.
