Nottinghamshire · England
Bath Repair for Stanton Hill homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Stanton Hill and across Nottinghamshire. Send pictures for a free, fixed quote.
- Repairs from £95
- Rust spots around the plughole
- Snagging damage from a refit
Questions from Stanton Hill
Do you work in Stanton Hill?
Yes, we do. We send a technician to Stanton Hill for every job, and the price is the same as everywhere else.
How do I get a price for bath repair in Stanton Hill?
Prices start from £95. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Is a cracked acrylic bath repairable?
Most of the time. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
How long does the repair take to cure?
Most baths can be used the following day. We confirm the time before we leave.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Can you repair several things at once?
Yes, and it’s often cheaper. Send pictures of everything together and we will quote them together.
Is a bath repair durable?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
How we handle bath repair in Stanton Hill
Most bath damage, from chips and cracks to rust spots and holes, can be repaired with the bath left exactly where it is. Nothing is unplumbed, your tiles stay as they are, and the repaired area is colour matched so it blends in. If you are dealing with cracks in an acrylic bath and chips along the edge of the bath, we can help, whatever the material.
We stand behind the work with a one-year guarantee, so you are not left on your own once we’ve gone.
- Location
- Stanton Hill (NG17)
- County
- Nottinghamshire
- Guarantee
- A year, on every repair
- Price
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Repairs by material
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so repair chips early.
Can I fix it myself?
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
Keeping it looking good
Once the work has cured, treat it gently:
- Do not leave a fresh chip for long
- Rinse it down after each bath
- Store metal items away from the bath
- Clean with warm water and a mild detergent
Give the repair the full curing time we recommend before using the bath. After that, gentle cleaning keeps it looking good.
Until we visit, a strip of waterproof tape over the damage helps, so water can’t get in. Remove it before the repair.
What we do, step by step
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take two to three hours for most chips. We clean up when we’re done and tell you when it’s ready to use.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Tell us if there are stairs or a lift
- Let us know if it has been repaired before
- Have somewhere for us to park nearby if possible
How to get a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Advice
Honest limits
Honesty matters more than a booking, so here’s what a repair cannot fix:
- Wear across the entire surface, which needs re-enamelling
- Leaks from the waste or overflow fittings (a plumber’s job)
- Metal that has corroded all the way through
If in doubt, send pictures and we’ll say what we think.
What we work on
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
- Cast iron enamel
Repair or replace in Stanton Hill?
Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like is not cheap. Repairing it leaves it where it is. Our bath repair starts from £95. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why book with us
- Everything repaired in place
- CHAS and Constructionline accredited
- Every repair guaranteed for a year
- Rooms protected and left tidy
See our prices page or guide to resurfacing and replacement costs.
Where we work around Stanton Hill
Stanton Hill is about 1 mile north-west of Sutton in Ashfield, in Nottinghamshire. Whether you are in the middle of Stanton Hill or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. We work in 329 places in Nottinghamshire, from the larger towns to small villages. Our nearest city page is Manchester, about 45 miles away.
Our visits in NG17 work the same way as everywhere else we cover. Whether you live on High Street, Welbeck Square and Morley Street or anywhere nearby, a technician can come to you. If you’re just outside Stanton Hill, we cover Skegby (1 mile north-east), Fackley (1 mile north-west), Teversal (1 mile north), Sutton in Ashfield (1 mile south-east) and Eastfield Side (1 mile south-east). We also work in nearby towns such as Mansfield (4 miles east), Beeston (15 miles south), Carlton (14 miles south-east), Worksop (14 miles north-east), Hucknall (8 miles south) and Mansfield Woodhouse (4 miles north-east).
What’s near Stanton Hill
Typical jobs here are in homes near All Saints' Church, Quarrydale Academy and Healdswood Infants' and Nursery School, among other places. For rail, the closest station is Sutton Parkway station, about 2.3 miles south-east of the centre. Other landmarks nearby include Stainsby Mill (3.4 miles north-west) and King's Mill Hospital (1.9 miles east).
Landlords, agents and businesses in Stanton Hill
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
What affects the price in Stanton Hill
Repairs from £95. We price every job individually. What matters most is:
- How easy the damage is to reach
- How many items we do on one visit
- What the surface is made of
- Whether old repairs or coatings need taking off
The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your photos, so you know the cost before booking.
Getting a price from photos
Before you send pictures, a few simple things make all the difference:
- Daylight if possible, and no flash reflection
- Where you are, by postcode
- One picture of the whole bath
- One sharp close-up of the damage
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and you’ll get a fixed price back. Quotes are free and you are under no obligation.
Also near Stanton Hill
What else we do in Stanton Hill
About our accreditations · Every repair comes with a one-year guarantee.
