Essex · England

Bath Repair for The Hythe homes

Problem with your bath in The Hythe? We repair it in place, match it on site and guarantee the work for a year.

  • Repairs from £95
  • A hole punched through by something heavy
  • Chips under the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair for The Hythe homes

How we handle bath repair in The Hythe

Whatever has happened to the bath, we aim for the same result: a repair that is smooth, sound and hard to spot. We prepare the area properly, fill and shape it, then match the colour and gloss so it’s level with the surrounding surface. Typical jobs include a cracked acrylic bath and chips caused by builders, on roll-top & freestanding, cast iron enamel and pressed steel enamel.

All our work comes with a one-year guarantee, wherever you are in Essex.

Location
The Hythe (CO1, CO4, CO2)
County
Essex
Guarantee
One year on every repair
Quote
From £95. Fixed and free, based on photos
Phone
0345 017 0787
Page updated
23 October 2026
Broken acrylic bath corner, rebuilt and refinished (before and after)

Should you replace it?

A new bath brings a chain of other jobs: tiles along the rim normally crack when it comes out, the panel may not fit the new one, and a plumber has to disconnect and reconnect everything. A repair skips all of it. Repairs from £95, with every job priced individually. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.

Why choose Surface Doctor in The Hythe

  • Nothing taken out or refitted
  • Fixed prices from your pictures
  • Straight answers about what a repair can do
  • Same prices wherever you are

Take a look at our prices page or bath cost comparison.

When a repair isn’t the answer

It helps to know what we cannot do too:

  • Wear across the whole surface, which needs re-enamelling
  • Metal that has corroded all the way through
  • Leaks from the waste or overflow fittings (a plumber’s job)

If in doubt, send photos and we will say what we think before booking.

Materials we repair

  • Acrylic
  • Cast iron enamel
  • Roll-top & freestanding
  • Pressed steel enamel
  • Whirlpool & spa baths

About The Hythe

The Hythe is about 1 mile south-east of Colchester, in Essex. From the centre of The Hythe to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. Our repair technicians cover 644 places across Essex. We work right across the region, from The Hythe to London (51 miles away).

Our visits in CO1, CO4 and CO2 work the same way as everywhere else we cover. From Port Lane, Beche Road and Haven Road or anywhere nearby, a technician can come to you. Neighbouring places we cover include Greenstead (1 mile north-east), Old Heath (1 mile south), Berechurch (2 miles south-west), Wivenhoe Cross (2 miles south-east) and Crockleford Heath (2 miles north-east). We also work in nearby towns such as Clacton-on-Sea (11 miles south-east), Maldon (15 miles south-west), Witham (14 miles south-west), Harwich (15 miles east), Halstead (13 miles west) and Heybridge (14 miles south-west).

Landmarks near The Hythe

Around The Hythe, we work in homes near Kendall Church of England Primary School, Colchester Academy and The Rising Sun Public House. Nearby too are Salary Brook Local Nature Reserve (0.8 miles east), Donyland Lodge (1.5 miles south) and Church of St Leonard at the Hythe (within half a mile north-west). The Hythe has its own railway station: Hythe station. Well-known places in the area include Colchester Castle (1.1 miles north-west) and Essex County Hospital (1.6 miles west). Open spaces near The Hythe include Cockaynes Wood.

Map of The Hythe © OpenStreetMap contributors

Prices and what affects them

Prices start from £95. Each job gets its own fixed quote. This is what makes a difference:

  • How much damage there is
  • What the surface is made of
  • How hard the colour is to match
  • What kind of damage it is

There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Send photos for a quote

Phone pictures are fine, there is no need for anything special. Just make sure we can see:

  • Details of any past repairs
  • A photo taken from further back
  • Any details about the material
  • Something in shot to show the size

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. What comes back is a fixed price, not a guess.

Do you need bath repair in The Hythe?

Nearly all the chips we see start with something being dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On steel and cast iron baths, a chip that reaches the metal lets water in, and rust follows.

Contact us if you’ve noticed any of these:

  • Chips on the rim or sides
  • Deep scratches in acrylic
  • An old repair that has yellowed or come loose
  • Hairline or through cracks in acrylic

What your quote should include

  • How long it needs to cure
  • How long the guarantee is and what it covers
  • Whether the price is fixed and includes VAT
  • Who will actually do the work

10 questions to ask before booking

The Hythe questions

Is repairing better than replacing?

Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.

Can you repair several things at once?

Yes, and it’s often cheaper. Send pictures of everything together and we’ll quote them together.

It’s been repaired before. Can you still fix it?

Generally, yes. Tell us what was done before and we will plan for it.

Do the materials smell?

There may be a mild smell during the work, which fades afterwards.

Do you cover the entire of Essex?

Everywhere in the UK, The Hythe included. Travel is included in the price.

Is there a guarantee?

Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.

Do you come to The Hythe?

Yes. We cover the whole UK and travel to The Hythe and the rest of Essex. Send us pictures for a fixed quote, or call 0345 017 0787.

Is a bath repair permanent?

Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps.

How it works

Arrival times are agreed in advance, so you are not left guessing. Once we are there, the work takes a few hours, depending on the damage for most jobs. The room is left tidy.

  1. Dust sheets and masking go down around the bath.
  2. We clean, key and degrease the damage, and any rust is treated.
  3. Filler goes in and is sanded flush once it has set.
  4. Colour and gloss are matched to the surrounding surface.
  5. We clear up and give you the curing time, normally until the following day.

Before we arrive

  • Let us know which floor the room is on
  • Have somewhere for us to park nearby if possible
  • Let us know if it has been repaired before

Ask for a price

The quickest way to a price is to send two or three pictures through our quote form or ring us. We will tell you honestly whether it can be repaired.

Get a fixed quote

Related advice

Landlord and trade work in The Hythe

Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.

Aftercare tips

Good habits make a big difference to how long a repair lasts. Here’s what we suggest:

  • Don’t scrub with anything abrasive
  • Rinse the bath after use, especially in hard water areas
  • Do not leave razors or cans standing in the bath
  • Use a soft cloth and washing-up liquid for everyday cleaning

Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust sets in.

Stop using the bath if a crack lets water through. Leaks under a bath can damage floors and ceilings.

What your bath is made of matters

Cast iron

A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.