North Yorkshire · England

Bath Repair for Thornton Steward homes

Bath repair in Thornton Steward without the cost of replacing. Get a fixed price from your pictures, then book a visit.

  • Repairs from £95
  • Rusty patches near the plughole
  • Chips caused by builders
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Thornton Steward

Landlord and trade work in Thornton Steward

For anyone letting property in or around Thornton Steward, we can repair and quote for several addresses together. Send photos for each one and we’ll price them together.

Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.

Bath repair in Thornton Steward without replacing anything

Bath repair is our most common job. Chips on the rim, rust around the waste and cracks in acrylic are all fixed without removing the bath, typically in a single visit. Whether it’s a kit repair that didn’t last and scuffs and scratches in the surface, we can help, on pressed steel enamel, roll-top & freestanding and cast iron enamel alike.

You’re covered for a year from the day of the repair. Just call us if there is a problem and we’ll come back.

Broken acrylic bath corner, rebuilt and refinished (before and after)
Where
Thornton Steward (HG4)
County
North Yorkshire
Cover
One year on every repair
Price
From £95. Fixed and free, based on photos
Phone
0345 017 0787
Updated
23 October 2026

What happens on the day

On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job generally takes a few hours. We clean up when we’re done and let you know when you can use it again.

  1. We clean the area and remove any loose enamel or rust.
  2. The chip or crack is filled, then sanded level with the bath.
  3. The colour is mixed on the spot to match your bath.
  4. We build up the finish and polish it into the surrounding enamel.
  5. The repair is left to cure, and most baths can be used the day after.

Getting ready for the visit

  • Tell us if there are stairs or a lift
  • Tell us about any previous repairs or coatings
  • Keep pets and children out of the room while we work

Get a quote

To get a price, send a couple of pictures through our quote form or ring us. We’ll say straight away if a repair is the right fix.

Get a fixed price

Read more

Signs you need bath repair in Thornton Steward

Baths take more knocks than people expect: everyday items get dropped into it all the time, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.

These are the problems we’re asked about most:

  • Scuffs and scratches in the surface
  • A chipped rim or side
  • Rusty patches near the plughole
  • Hairline or through cracks in acrylic

Questions to ask before you book

  • How the room is protected while they work
  • Who will actually do the work
  • How the colour is matched
  • Whether cleaning and preparation are in the price

How to compare quotes

Repair or replace in Thornton Steward?

For damage in one or two places, a repair is the obvious choice. It costs far less than a new bath plus fitting, it takes one visit, and the bathroom stays exactly as it is. Prices start from £95. We charge the same wherever you are, with no extra for Thornton Steward. The job itself decides the price: how much damage, what it’s made of and how many items.

Why book with us

  • Colour mixed on the day to match
  • CHAS, Constructionline and SafeContractor accredited
  • Most jobs done in one visit
  • Same prices wherever you are

Take a look at our prices page or guide to resurfacing and replacement costs.

When we would advise against a repair

To be straight with you, there are a few things a repair will not fix:

  • A bath that flexes because its feet or cradle have failed (that needs fixing first)
  • A whole bath that is dull or worn, where a full re-enamel is the better fix
  • A steel bath rusted through

If in doubt, send photos and we’ll say what we think.

Materials we repair

  • Roll-top & freestanding
  • Cast iron enamel
  • Pressed steel enamel
  • Whirlpool & spa baths
  • Acrylic

Different materials, different repairs

Cast iron

Cast iron baths are thick and very strong, with a fused enamel surface. A chip down to the iron can rust, but the body of the bath lasts a very long time, which makes it well worth repairing.

Pressed steel

Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.

DIY kit or professional repair?

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

Your questions about bath repair in Thornton Steward

Is a bath repair durable?

Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps.

Is a holed acrylic bath repairable?

Generally. Send us a photo of the hole and one from under the bath if you can.

What happens next?

We review the pictures and send a fixed quote and the next dates we have.

How quickly can you book me in?

We’ll give you dates with your quote. Tell us if you need it done quickly.

Can you price it without visiting?

Nearly always. If pictures do not show enough, we will ask for another angle.

Can rust on a bath be repaired?

Yes, very often. The rust is cut back to clean metal and sealed before we fill and finish it.

Do I need to be at home?

We need someone to let us in. You do not need to watch us work.

Do you cover Thornton Steward?

We do. Technicians travel to Thornton Steward from across the region, with no extra charge for travel.

What bath repair costs

Repairs from £95. There are no hourly rates or hidden extras. The price is based on:

  • Access to the area
  • Whether old repairs or coatings need taking off
  • Unusual colours or finishes
  • How much damage there is

The price depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed price from your photos, so there are no surprises on the day.

Quotes from your pictures

Before you send pictures, a few simple things make all the difference:

  • A close-up of the damage, in focus
  • Something in shot to show the size
  • Whether it’s been repaired or coated before
  • Where you are, by postcode

Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.

Covering Thornton Steward

Thornton Steward is about 7 miles south of Catterick Garrison, in North Yorkshire. Wherever you are in the HG4 postcode area, we come to you. Our repair technicians cover all 626 towns and villages in North Yorkshire, from the larger towns to small villages. Our nearest city page is Leeds, about 33 miles away.

Here we cover the HG4 postcode area. Nearby, we also work in Hutton Hang (1 mile north-west), Finghall (2 miles north), Unthank (2 miles north), East Witton (2 miles west) and Akebar (2 miles north). Further out, we also cover Ripon (13 miles south-east), Catterick Garrison (7 miles north), Northallerton (13 miles east), Richmond (9 miles north), Colburn (7 miles north) and Bedale (6 miles east).

Landmarks near Thornton Steward

We visit homes around Church of St Oswald and the streets around them. Well-known places in the area include Clifton Castle (3.1 miles south-east).

Map of Thornton Steward © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.