Derbyshire · England
Bath chip & crack repair in Thorpe, Derbyshire
Bath repair in Thorpe without the cost of replacing. Get a fixed price from your pictures, then book a visit.
- Repairs from £95
- An old repair that has yellowed or come loose
- Chips along the edge of the bath
About our bath repair in Thorpe
Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, normally in one visit. Our technicians work on pressed steel enamel, acrylic and roll-top & freestanding, and the jobs we see most are chips caused by builders and an old repair that has yellowed or come loose.
You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Location
- Thorpe (DE6)
- Area hub
- Derbyshire
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Do you need bath repair in Thorpe?
Rust usually starts where water sits, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.
Common reasons people in Thorpe contact us include:
- A chipped rim or side
- A chip where the taps sit
- Rust by the waste and overflow
- Hairline or through cracks in acrylic
Before booking anyone
- What happens if they find more damage
- Whether they match the colour on site
- How the room is protected while they work
- Whether the price is fixed and includes VAT
About Thorpe
Thorpe is about 10 miles north-east of Cheadle, in Derbyshire. Whether you’re in the middle of Thorpe or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. We cover all 532 towns and villages across Derbyshire, from the larger towns to small villages. We work right across the region, from Thorpe to Manchester (35 miles away).
Our technicians cover all of DE6. From Wintercroft Lane and Digmire Lane or anywhere nearby, we can come to you. Other places close to Thorpe include Fenny Bentley (1 mile east), Swinscoe (2 miles south-west), Alsop en le Dale (3 miles north), Hangingbridge (3 miles south) and Mayfield (3 miles south). We also work in nearby towns such as Belper (12 miles east), Buxton (15 miles north-west), Ripley (15 miles east), Matlock (11 miles north-east), Hilton (14 miles south-east) and Bakewell (12 miles north).
Landmarks near Thorpe
We visit homes around Church of St Leonard and Fitzherbert CofE (Aided) Primary School, among other places. Well-known places in the area include St Oswalds Hospital (2.8 miles south-east) and Ashbourne Rural District (2.8 miles south-east). Open spaces near Thorpe include Castern Wood and Thorpe Cloud.
Nearby places to Thorpe
Other services in Thorpe
When we’d advise against a repair
Before booking, it’s worth knowing the limits too:
- Metal that has corroded all the way through
- Flexing caused by a failed cradle or loose feet
- Acrylic cracks with no access behind them
Send us pictures and we’ll tell you honestly before you book.
Materials we work on in Thorpe
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
- Acrylic
How to look after the repair
Aftercare is simple, and it makes a real difference:
- Give the bath a quick rinse after use
- Make sure an acrylic bath is firm underfoot
- Have new chips seen to early
- Stick to mild cleaners and a soft cloth
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust can start.
A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.
Your questions about bath repair in Thorpe
Do you come to Thorpe?
Yes. We cover the entire UK and come to Thorpe. Send photos and we’ll quote, or call 0345 017 0787.
Can you price it without visiting?
Nearly always. We only ask to see it in person if the pictures can’t show what we need.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
Is a cracked acrylic bath repairable?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
What if the damage is worse than the photos show?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
Will the repair last?
Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps it last.
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Prices and what affects them
Prices start from £95. A fixed quote means you know the cost before you book. We take into account:
- The size and number of damaged areas
- What the surface is made of
- Any earlier repairs that need removing first
- How many items we do on one visit
A repair normally costs much less than people expect, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
Send photos for a quote
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- Any details about the material
- Any earlier repairs or coatings
- A coin or ruler next to the damage for scale
- One picture of the entire bath
Send us pictures of the damage and a wider shot of the whole item, and tell us you are in Thorpe, and we’ll reply with a fixed quote.
What your bath is made of matters
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. A chip down to the iron can rust, but the body of the bath lasts a very long time, which makes it well worth repairing.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
The process
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes a few hours, depending on the damage. If anything looks different from your pictures, we will talk to you before going ahead.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can normally use the bath the next day.
Preparing for the visit
- Let us know if it has been repaired before
- Keep a parking space free if you can
- Mention if the room is upstairs or in a flat
Getting a price
The quickest way to a price is to send a couple of pictures through our quote form or ring us. We will tell you honestly whether it can be repaired.
Read more
Why repair rather than replace?
Replacing a fitted bath typically means a plumber, removing the old bath, re-tiling and a new panel and getting rid of the old bath. Repairing it deals only with the damage in one visit. Prices start from £95. The price reflects the work involved, not your postcode. The full price is agreed before you book.
Why book with us
- CHAS and Constructionline accredited
- Honest advice, even when it means no job
- Colours mixed by hand to suit your surface
- No extra charge for your area
See our prices page or guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
