Greater London · England
Bath Repair for Three Mills homes
Chip and crack repairs to enamel, acrylic and cast iron baths in Three Mills, carried out at your home and guaranteed for a year.
- Repairs from £95
- A cracked acrylic bath
- An old repair that has yellowed or come loose
Bath repair at your home in Three Mills
We repair enamelled steel, cast iron and acrylic baths. The method changes with the material: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. Common call-outs are for an old repair that has yellowed or come loose and snagging damage from a refit, in cast iron enamel, acrylic and whirlpool & spa baths.
Whatever the size of the job, it’s backed by a one-year guarantee in Three Mills and across Greater London.
- Area
- Three Mills (E3, E15, E14)
- Area hub
- Greater London
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Landlords, agents and businesses in Three Mills
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
When to call us in Three Mills
Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, often before anyone notices. We repair snagging damage like this regularly.
These are the problems we’re asked about most:
- Deep scratches in acrylic
- An old repair that has yellowed or come loose
- Chips under the taps
- Hairline or through cracks in acrylic
Comparing quotes
- Whether cleaning and preparation are in the price
- Whether they match the colour on site
- Whether a trained technician does the job
- How long it needs to cure
What we do, step by step
Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, then carry out the work, which usually takes a few hours, depending on the damage. If anything looks different from your photos, we will talk to you before going ahead.
- First, the area is cleaned and any loose enamel or rust is removed.
- The chip or crack is filled, then sanded level with the bath.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the following day.
How to prepare
- Tell us about parking, stairs or access
- Keep pets and children out of the room while we work
- Clear the area around the damage
Getting a price
Send us photos of the damage and a wider shot of the entire item, with your E3 postcode, and we’ll reply with a fixed price.
Advice
How we price bath repair
Prices start from £95. You won’t pay by the hour. The price depends on:
- Whether we combine several jobs
- The colour and finish to match
- Whether it’s a chip, crack, burn or wear
- How much damage there is
A repair normally costs much less than people expect, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
Quotes from your photos
You can take the photos on your phone, there’s no need for anything special. Just ensure we can see:
- A coin or ruler next to the damage for scale
- Your postcode, so we can check dates
- One picture of the entire bath
- Any earlier repairs or coatings
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
DIY repairs versus a professional job
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
Your questions about bath repair in Three Mills
How quickly can you book me in?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
Can you repair something that is been repaired before?
Most of the time. Tell us what was done before and we’ll plan for it.
What does bath repair cost?
Repairs from £95. We give a fixed quote from your pictures. Send a close-up of the damage and a wider photo and your postcode.
Do you cover Three Mills?
We do. Technicians travel to Three Mills from across the region, and the price is the same as everywhere else.
Will I be able to see the repair?
On a bath in good condition, a colour-matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
Something went through my bath. Can it be fixed?
Typically, yes, if we can reach behind it. The hole is backed, filled and refinished to match.
Will the price change on the day?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
When we would advise against a repair
A few problems are outside what a surface repair can do:
- Acrylic cracks with no access behind them
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Leaks from the waste or overflow fittings (a plumber’s job)
Send us pictures and we’ll tell you honestly before booking.
Surfaces we repair
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
- Acrylic
Places near Three Mills
What else we do in Three Mills
Looking after it afterwards
Once the work has cured, treat it gently:
- Have new chips seen to early
- Don’t scrub with anything abrasive
- Cover the bath during DIY or decorating
- Check that an acrylic bath doesn’t move when you stand in it
Don’t leave razors, cans or hair grips in the bath, because they can mark the enamel. And fix dripping taps promptly.
Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.
Repairs by material
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so early repairs matter.
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour matched, just like other baths.
About Three Mills
Three Mills is about 1 mile south of Stratford, in Greater London. Anywhere in E3, we carry out the work at your property. Three Mills is one of 764 places in Greater London we cover.
Every address in E3, E15 and E14 is covered. From Gay Road, Bruce Road and Edgar Road or a nearby road, a technician can come to you. We also travel to Mill Meads (1 mile north), Bromley (1 mile south-west), Old Ford (1 mile north-west), Bow (1 mile west) and Bow Common (1 mile south-west). Within a short drive, we also cover London (4 miles south-west), City of Westminster (6 miles west), Marylebone (6 miles west), Kensington (9 miles west), St Pancras (5 miles west) and Shoreditch (3 miles west).
Local landmarks in Three Mills
We visit homes around Rose and Crown pub, Manorfield Primary School and East London Science School and the streets around them. Other local landmarks include London International School of Performing Arts (within half a mile east), Bob's Park (within half a mile west) and St Mary's Church (within half a mile west). The nearest railway station is West Ham station, roughly 0.5 miles east. Other landmarks nearby include County Borough of West Ham (1 mile north-east) and Stratford Centre (1 mile north). For a walk, there’s Hollow Pond and Old Ford Island.
About our accreditations · Every repair comes with a one-year guarantee.
