Cumbria · England
Bath Repair in Thrimby
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Thrimby and across Cumbria. Send pictures for a free, fixed quote.
- Repairs from £95
- Rust spots around the plughole
- Hairline or through cracks in acrylic
Aftercare tips
Once the work has cured, treat it gently:
- Don’t leave a fresh chip for long
- Put a towel in the bath if you’re working above it
- Rinse it down after each bath
- Use a soft cloth and washing-up liquid for everyday cleaning
Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust can start.
A small chip is a quick job. Left alone, they stain and can rust, so early repair saves time and money.
Bath repair in Thrimby, done in place
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Whether it’s a chip where the taps sit and a chipped rim or side, we can help, on roll-top & freestanding, pressed steel enamel and cast iron enamel alike.
Big or small, you get the same one-year guarantee.
- Location
- Thrimby (CA10)
- Area hub
- Cumbria
- Cover
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Nearby places to Thrimby
What else we do in Thrimby
Work for landlords and builders
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
Landlords, letting agents and housing providers in Thrimby use us as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Repair or replace: which is better?
Replacing a bath rarely stops at the bath: tiles along the rim typically crack when it comes out, a new panel is often needed, and the plumbing has to be disconnected and refitted. A repair skips all of it. Our bath repair starts from £95. We charge the same wherever you are, with no extra for Thrimby. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why choose Surface Doctor in Thrimby
- No need to remove anything
- Dust sheets down, tidy finish
- Free fixed quotes from pictures
- Straight answers about what a repair can do
Read our full price list or bath cost comparison.
What your bath is made of matters
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
Do you need bath repair in Thrimby?
A cracked acrylic bath generally wasn’t supported properly. Loose legs, no proper cradle or a floor that gives let the bath move until the acrylic gives way.
You may need us if you’ve spotted any of these:
- Chips on the rim or sides
- Scuffs and scratches in the surface
- Chips caused by builders
- Rust spots around the plughole
Questions to ask before booking
- How to look after the finish
- How the colour is matched
- Whether there are any call-out or travel charges
- When it can be used again
How it works
Visits start with a quick look at the job together, so you know exactly what we’re doing. Then the area is sheeted and masked and the work begins. Allow a few hours.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the following day.
How to prepare
- Keep a parking space free if you can
- Tell us about any previous repairs or coatings
- Mention if the room is upstairs or in a flat
Get a quote
There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Advice
Your questions about bath repair in Thrimby
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Is a bath repair permanent?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps.
Is a holed acrylic bath repairable?
Typically, yes, if we can reach behind it. The hole is backed, filled and refinished to match.
Can you fix rust around the plughole?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can tenants book a repair?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Can you do more than one item on the same visit?
Yes, and it’s frequently cheaper. Send pictures of everything together and you will get one combined price.
Do you cover the whole of Cumbria?
The whole UK, including all of Cumbria. Just include your postcode and we’ll confirm dates.
DIY kit or professional repair?
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
Honest limits
We’d rather lose a job than do one that won’t last, so here’s what a repair cannot put right:
- Rust that has eaten right through a steel bath
- Acrylic cracks with no access behind them
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
Send us pictures and we will tell you honestly.
Materials we repair
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
Thrimby and the surrounding area
Thrimby is about 6 miles south of Penrith, in Cumbria. Anywhere in CA10, we carry out the work at your property. Our technicians cover all 438 towns and villages across Cumbria. Our nearest city page is Newcastle upon Tyne, about 51 miles away.
All of CA10 is covered, from the main roads to the quietest streets. We also travel to Hackthorpe (2 miles north), Great Strickland (2 miles north-east), Bampton Grange (2 miles south-west), Lowther (2 miles north) and Bampton (2 miles south-west). Within a short drive, we also cover Penrith (6 miles north), Appleby-in-Westmorland (9 miles east), Fair Hill (7 miles north), Ambleside (15 miles south-west), Carleton (6 miles north) and Bongate (9 miles east).
Near you in Thrimby
In Thrimby, that means homes near Church of St Mary and the streets around them. Nearby you’ll also find Lowther Castle (2.6 miles north-west). Not far away are Littlewater Tarn and Heughscar Hill.
About our accreditations · Every repair comes with a one-year guarantee.
