North Yorkshire · England
Bath chip & crack repair in Thruscross, North Yorkshire
Chip and crack repairs to enamel, acrylic and cast iron baths in Thruscross, carried out at your home and guaranteed for a year.
- Repairs from £95
- Chips caused by builders
- Rust spots around the plughole
About our bath repair in Thruscross
A damaged bath does not have to mean a new bathroom. Our repair technicians fill, shape and refinish the damage, mixing the colour on the day. If you’re dealing with damage done while the bathroom was being fitted and a kit repair that didn’t last, we can normally put it right, on acrylic, whirlpool & spa baths and cast iron enamel alike.
All of our repairs are guaranteed for twelve months. We return to put right any problem with the work.
- Area
- Thruscross (HG3)
- Region
- North Yorkshire
- Cover
- A year, on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Repairing versus replacing in Thruscross
A new bath costs more than the bath itself: removal and disposal, plumbing, a new panel, tiling and decorating. A repair is one job, done in one visit. Our bath repair starts from £95. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why choose Surface Doctor in Thruscross
- Honest advice, even when it means no job
- We come to you, anywhere in the UK
- Colours mixed by hand to suit your surface
- A fixed quote before you book
See our full price list and resurfacing vs replacement cost guide.
How we price bath repair
Repairs from £95. Every quote is fixed and free. What we take into account:
- The size and number of damaged areas
- Unusual colours or finishes
- Doing more than one item at once
- What kind of damage it is
What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your pictures, so you know the cost before booking.
How to get a fixed quote
Two or three clear pictures are typically enough. It helps if you send:
- Daylight if possible, and no flash reflection
- A coin beside the damage so we can judge size
- A close-up of the damage, in focus
- Any earlier repairs or coatings
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Work for landlords and builders
For developers and builders, we fix damage before handover. We can visit several plots in one trip.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
A DIY attempt is not a disaster. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
How to look after the repair
How the surface is treated afterwards matters:
- Keep abrasive pads and gritty cleaners away from the bath
- Have new chips seen to early
- Keep metal cans and razors off the surface
- Fix dripping taps early to stop staining and limescale
Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.
Do not leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is what we repair.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Thruscross and nearby
Thruscross is about 7 miles north of Ilkley, in North Yorkshire. We agree a date that works for you, and you’ll know when to expect us, so there’s no waiting around. Thruscross is one of 626 places in North Yorkshire we cover. You can also see our page for Leeds, about 17 miles away.
Every address in HG3 is within our area. From Greenhow Hill Road and Reservoir Road or a nearby road, a technician can come to you. Nearby, we also work in Padside (1 mile north-east), Thornthwaite (1 mile east), Blubberhouses (1 mile south), Heyshaw (2 miles north) and Dacre (2 miles north-east). Within a short drive, we also cover Harrogate (9 miles east), Knaresborough (12 miles east), Skipton (11 miles south-west), Ripon (12 miles north-east), Starbeck (11 miles east) and Bilton (9 miles east).
Landmarks near Thruscross
Our customers here include homes close to Dacre Braithwaite Church of England Primary School and Church of St Saviour, among other places. Further afield, we also cover the area around John O'Gaunt's Castle (4.4 miles south-east).
Nearby places to Thruscross
Other services in Thruscross
Thruscross: your questions answered
Something went through my bath. Can it be fixed?
In most cases. Send us a picture of the hole and one from under the bath if you can.
Can you do more than one item on the same visit?
Of course, and it generally saves money. Just add the extra items to your pictures and we will quote them together.
Will the price change on the day?
Your quote covers the damage in the photos. If there is more, we’ll tell you before starting.
Can you repair a crack in an acrylic bath?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
What information do you need?
Use the quote form or ring 0345 017 0787, and we will do the rest.
Can you redo an old repair?
Yes. We remove the old filler and start again. Mention it when you send pictures.
Does someone need to be in?
We need someone to let us in. After that, you can carry on with your day.
Do you repair coloured baths?
Yes. The colour is mixed on site to suit your bath, including older coloured suites.
The process
We turn up at the time we agreed with you and checks the damage against your pictures first. Dust sheets and masking tape go down before we open a single tin. The work itself takes two to three hours for most chips, and we leave the room as we found it.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Before we arrive
- Tell us if there are stairs or a lift
- Plan for the room to be out of bounds to pets and children
- Let us know if it has been repaired before
How to get a price
To get a price, send two or three pictures through our quote form or call us. We’ll tell you honestly if a repair is the right fix.
Read more
What a repair can’t fix
Honesty matters more than a booking, so here’s what a repair cannot fix:
- Acrylic cracks with no access behind them
- Rust that has eaten right through a steel bath
- Leaks from the waste or overflow fittings (a plumber’s job)
Not sure? Send pictures and we will give you a straight answer before you book.
What we work on
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
About our accreditations · Every repair comes with a one-year guarantee.
