Somerset · England
Bath chip & crack repair in Tintinhull, Somerset
Our technicians come to Tintinhull for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- Deep scratches in acrylic
- A chip where the taps sit
Bath repair in Tintinhull without replacing anything
We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath and the tiles around it. Most baths can be used again the day after. We regularly repair roll-top & freestanding, cast iron enamel and pressed steel enamel, and the jobs we see most are a kit repair that didn’t last and impact holes in acrylic.
You’re covered for a year from the day of the repair. If anything is not right, ring us and we will come back.
- Location
- Tintinhull (BA22)
- Region
- Somerset
- Warranty
- 12 months on all our work
- Price
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Should you replace it?
Many people think a damaged bath means a new one. Usually it does not: a repair keeps the bath in service for years, and costs far less than the disruption of a replacement. Prices start from £95. We charge the same wherever you are, with no extra for Tintinhull. What changes the price is the job itself: the material, the amount of damage and how many items.
What you get with us
- Colours mixed by hand to suit your surface
- Same prices wherever you are
- No need to remove anything
- One visit for most repairs
See our prices page and bath cost comparison.
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
Other services in Tintinhull
Your questions about bath repair in Tintinhull
Can you redo an old repair?
Yes. We take out the old repair and do it properly. Tell us about it when you send photos.
Is there a call-out fee?
There is no separate call-out charge. Your fixed price includes everything.
How do I get a price for bath repair in Tintinhull?
Repairs from £95. Because every job differs, we price from photos. You know the full cost before anything is booked.
What if the damage is worse than the pictures show?
We’ll show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.
What happens next?
We come back with a fixed quote, plus dates. There is no obligation to book.
Is a bath repair permanent?
It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is there any odour?
There can be some smell while we work, so we ventilate the room. It clears as the materials cure.
What affects the price in Tintinhull
Repairs from £95. A fixed quote means you know the cost before booking. We look at:
- How much damage there is
- What kind of damage it is
- Doing more than one item at once
- Unusual colours or finishes
Compared with replacing, repairing normally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Send photos for a quote
Most quotes are done from pictures alone. To make it quick:
- The postcode, so we can plan the visit
- The material, if you know it
- A photo taken from further back
- A coin beside the damage so we can judge size
For a price in Tintinhull, the easiest route is pictures: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
What we do, step by step
It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which normally takes a few hours. If anything looks different from your pictures, we’ll talk to you before going ahead.
- First, we check the damage against your photos and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Preparing for the visit
- Mention any parking restrictions or tricky access
- Have somewhere for us to park nearby if possible
- Clear toiletries, mats and anything else from around the area
Get a quote
The quickest way to a price is to send a couple of photos using our quote form or ring us. We will tell you honestly whether it can be repaired.
Related advice
Landlord and trade work in Tintinhull
For anyone letting property in or around Tintinhull, we can repair and quote for several addresses together. Just send photos for each address and we will come back with a combined price.
We work for landlords, letting agents and housing providers in Tintinhull as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
How to look after the repair
Aftercare is simple:
- A dripping tap stains enamel, so fix it early
- Give the bath a quick rinse after use
- Get any new chip repaired before it rusts
- Keep metal cans and razors off the surface
Give the repair the full curing time we recommend before using the bath. From then on, mild cleaning is all it needs.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and water can get through to the floor below.
What we cannot put right
Honesty matters more than a booking, so here’s what a repair will not do:
- Metal that has corroded all the way through
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Flexing caused by a failed cradle or loose feet
Not sure? Send photos and we will give you a straight answer.
Materials we repair
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, just like other baths.
Where we work around Tintinhull
Tintinhull is about 4 miles north-west of Yeovil, in Somerset. Clients in Tintinhull get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. Tintinhull is one of 640 towns and villages in Somerset we cover.
Here we cover the BA22 postcode area. Local streets include Head Street, Montacute Road and Southcombe Way, and we cover them all. Neighbouring places we cover include Montacute (1 mile south), Ash (2 miles north-west), Stoke sub Hamdon (2 miles south-west), Witcombe (2 miles north-west) and Martock (2 miles west). Within a short drive, we also cover Yeovil (4 miles south-east), Chard (13 miles south-west), Street (11 miles north), Glastonbury (12 miles north), Crewkerne (7 miles south-west) and Wincanton (14 miles north-east).
What’s near Tintinhull
Locally, our jobs take us to homes close to Stanchester Academy, Church of St Margaret and Crown & Victoria Inn and the streets around them. The nearest railway station is Yeovil Pen Mill station, about 4.8 miles east. Well-known places in the area include Yeovil Hospital (4 miles south-east) and Montacute TV Radio Toy Museum (1.5 miles south). Open spaces near Tintinhull include Ham Hill.
About our accreditations · Every repair comes with a one-year guarantee.
