Worcestershire · England
Bath Repair for Titton homes
Bath repair in and around Titton: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- Snagging damage from a refit
- A chipped rim or side
About our bath repair in Titton
Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, typically in a single visit. If you are dealing with a kit repair that didn’t last and holes from dropped items, we can usually put it right, on cast iron enamel, whirlpool & spa baths and acrylic alike.
Big or small, you get the same one-year guarantee.
- Where
- Titton (DY13)
- Region
- Worcestershire
- Guarantee
- 12 months on all our work
- Quote
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Questions from Titton
Can landlords book you?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Titton.
What does bath repair cost?
Prices start from £95. Every job gets a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo with your DY13 postcode.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is a holed acrylic bath repairable?
In most cases. Photos of the hole and the underside help us check.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
What areas do you cover?
The entire UK, including all of Worcestershire. Send your postcode with your photos and we’ll offer you dates.
Is my repair covered?
All our work carries a one-year guarantee. We’ll explain what it covers when we quote.
Can you repair something that is been repaired before?
Yes, we frequently do. It can add a little time, which we include in the quote.
When a repair isn’t the answer
We would rather lose a job than do one that will not last, so here’s what a repair can’t put right:
- A bath that moves underfoot, until its support is fixed
- Cracks in acrylic we cannot reach from underneath
- Wear across the entire surface, which needs re-enamelling
If in doubt, send photos and we’ll say what we think before booking.
Materials we work on in Titton
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
Landlords, agents and businesses in Titton
We work for landlords, letting agents and housing providers in Titton as well as homeowners. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
Signs you need bath repair in Titton
Heavy toiletries are the biggest single cause of chips, closely followed by shower heads. Taps and wastes cause problems too: water collects there, so chips nearby rust quickly.
Look out for these signs:
- Damage beneath the taps
- A failed DIY repair that’s discoloured or lifting
- Chips on the rim or sides
- Hairline or through cracks in acrylic
Comparing quotes
- What preparation is included
- Whether the colour is mixed to match
- A fixed price, and whether VAT is included
- Who turns up on the day
More services for Titton
Repairs by material
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
About Titton
Titton is about 1 mile south-east of Stourport-on-Severn, in Worcestershire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Titton is one of 376 towns and villages in Worcestershire where we work. We work right across the region, from Titton to Birmingham (about 18 miles away).
Our visits in DY13 are booked in the same way as anywhere else. Main roads around Titton include the A4025, which makes travel easy. Nearby, we also work in Lower Heath (1 mile west), Chadwick (1 mile south-east), Waresley (1 mile east), Crossway Green (1 mile south-east) and Hartlebury (1 mile east). We also work in nearby towns such as Worcester (9 miles south), Redditch (14 miles east), Kidderminster (4 miles north), Bromsgrove (8 miles east), Great Malvern (15 miles south) and Droitwich Spa (6 miles south-east).
What’s near Titton
In Titton, that means homes near Church of St James, Hartlebury CofE Primary School and Old Rose and Crown pub. For rail, the closest station is Hartlebury station, roughly 1.6 miles east. Nearby you will also find Kidderminster Railway Museum (3.9 miles north) and Kidderminster Hospital (4 miles north). For a walk, there is Abberley Hill and Wilden Marsh.
Aftercare tips
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Cover the bath during DIY or decorating
- Get a dripping tap fixed promptly
- Avoid scourers, wire wool and gritty cream cleaners
- Ensure an acrylic bath is firm underfoot
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath.
Stop using the bath if a crack lets water through until it’s repaired. Water under the bath can damage the floor and the ceiling below.
What we do, step by step
We begin by going over the job with you, so there are no surprises. Next, we cover and mask everything nearby and the work begins. It normally takes a few hours.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- Finish coats go on, then the repair is polished to blend in.
- Once it has cured, typically by the day after, the bath is ready to use.
How to prepare
- Keep children and pets away from the room on the day
- Mention any earlier repairs or resurfacing
- Let us know which floor the room is on
Get a quote
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price without visiting.
Advice
How we price bath repair
Repairs from £95. There is no area surcharge for Titton. What changes the price is:
- How hard the colour is to match
- How easy the damage is to reach
- The material
- How much damage there is
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Quotes from your photos
When you take your pictures, a few simple things make all the difference:
- Your postcode, so we can check dates
- A wider photo showing the whole bath
- Something in shot to show the size
- Natural light rather than flash
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
DIY repairs versus a professional job
If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
About our accreditations · Every repair comes with a one-year guarantee.
