Staffordshire · England
Bath Repair for Tompkin homes
Fixed-price bath repair in Tompkin and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- Hairline or through cracks in acrylic
- Damage done while the bathroom was being fitted
Bath repair in Tompkin without replacing anything
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. We are often asked to fix rusty patches near the plughole and a hole punched through by something heavy, on cast iron enamel, whirlpool & spa baths and pressed steel enamel.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before booking.
- Where
- Tompkin (ST9)
- County
- Staffordshire
- Cover
- 12 months on all our work
- Quotes
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Questions from Tompkin
How do I get a price for bath repair in Tompkin?
Repairs from £95. We give a fixed price from your photos. Send a close-up of the damage and a wider photo and your postcode.
Can you repair a chip on a coloured bath?
Yes. The colour is mixed on site to suit your bath, including pastel and older colours.
Is my repair covered?
Every repair comes with a one-year guarantee. We’ll explain what it covers when we quote.
Do you cover Tompkin?
Yes. We work across the UK and travel to Tompkin. Send photos and we will quote, or call 0345 017 0787.
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
Can you fix rust around the plughole?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
What happens if you find more damage?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Is a bath repair permanent?
Yes, if it’s prepared properly and the bath is sound. It carries our one-year guarantee.
Also near Tompkin
Also in Tompkin
Our work in Tompkin
Tompkin is about 3 miles east of Ford Green, in Staffordshire. Jobs in Tompkin are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. Tompkin is one of 512 towns and villages in Staffordshire we cover. Our jobs stretch from Tompkin to Manchester (29 miles away).
Our visits in ST9 work the same way as everywhere else we cover. Close by, we cover Cheddleton (2 miles east), Denford (2 miles north-east), Wetley Rocks (2 miles south-east), Armshead (2 miles south) and Longsdon (2 miles north). Within a short drive, we also cover Newcastle-under-Lyme (7 miles south-west), Longton (5 miles south), Stone (11 miles south), Leek (4 miles north-east), Biddulph (5 miles north-west) and Alsager (10 miles west).
What’s near Tompkin
Locally, our jobs take us to homes close to Church of St Chad and Endon High School, among other places. Other landmarks nearby include Abbey Green (2.4 miles south-west) and St Edward's Hospital (2.4 miles north-east). For a walk, there is Coombes Valley RSPB reserve.
Repair or replace in Tompkin?
Many people think a damaged bath means a new one. In most cases it doesn’t: a repair keeps the bath in service for years, and costs far less than the disruption of a replacement. Repairs from £95, with every job priced individually. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
Why book with us
- Most jobs done in one visit
- Free fixed quotes from pictures
- Rooms protected and left tidy
- Work done at your home or business
Read our prices page and guide to resurfacing and replacement costs.
Keeping it looking good
So the finish stays in good condition:
- Use a soft cloth and washing-up liquid for everyday cleaning
- If an acrylic bath flexes, have its feet adjusted
- Keep metal cans and razors off the surface
- Have new chips seen to early
Don’t leave razors, cans or hair grips in the bath, because they can mark the enamel. And fix dripping taps promptly.
Small chips are quick to repair. Left alone, they stain and can rust, so it’s worth getting them done early.
How the visit works
Arrival times are agreed in advance, so you know when to expect us. Once we’re there, the work takes a few hours, depending on the damage in most cases. The room is left tidy and ready to use once it has cured.
- First, we check the damage against your pictures and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Before we arrive
- Mention any earlier repairs or resurfacing
- Point us to the nearest place to park
- Move bottles, mats and clutter away from the area
Get a quote
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Read more
For landlords and businesses
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
We’re used to working with agents and managing companies. Just send pictures, the address and how to get access and we’ll handle the rest.
What affects the price in Tompkin
Repairs from £95. Every quote is fixed and free. What we take into account:
- Previous DIY repairs that have to come out
- What the surface is made of
- Where the damage is and how we get to it
- The size and number of damaged areas
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
How to get a fixed quote
We price nearly every job from photos. This is what to send:
- Natural light rather than flash
- Any earlier repairs or coatings
- A coin beside the damage so we can judge size
- Any details about the material
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
What we’re called out for in Tompkin
Most bath damage comes from something dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, any chip down to the metal will start to rust.
Common reasons people in Tompkin contact us are:
- Damage done while the bathroom was being fitted
- Impact holes in acrylic
- A chipped rim or side
- Scratches you can feel with a fingernail
What to look for in a quote
- What preparation is included
- Whether the colour is mixed to match
- Is the price fixed, and does it include VAT?
- What protection goes down before work starts
Repairs by material
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so early repairs matter.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There is no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
What a repair cannot fix
Honesty matters more than a booking, so here’s what a repair won’t do:
- Rust that has eaten right through a steel bath
- Water coming from the waste or taps rather than the bath
- A bath worn all over, where resurfacing makes more sense
Not sure? Send photos and we will give you a straight answer.
Surfaces we repair
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
About our accreditations · Every repair comes with a one-year guarantee.
