Highland · Scotland

Bath Repair for Tormore homes

Chip and crack repairs to enamel, acrylic and cast iron baths in Tormore, carried out at your home and guaranteed for a year.

  • Repairs from £95
  • Chips on the rim or sides
  • Holes from dropped items
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath repair in Tormore?

Signs you need bath repair in Tormore

A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Over time, chips and rust spots are almost inevitable.

Keep an eye out for these signs:

  • An old repair that has yellowed or come loose
  • A chipped rim or side
  • Scuffs and scratches in the surface
  • A cracked acrylic bath

What to look for in a quote

  • Whether there are any call-out or travel charges
  • How your room will be protected
  • How long it needs to cure
  • Whether they match the colour on site

How to compare quotes

Bath repair at your home in Tormore

It pays to repair bath damage while it’s small. On steel and cast iron, exposed metal starts to rust, while cracks in acrylic grow each time the bath moves. A repair stops both. We’re often asked to fix a hole punched through by something heavy and chips caused by builders, in cast iron enamel, whirlpool & spa baths and roll-top & freestanding.

Every job is backed for twelve months. If something goes wrong with the work, we come back.

Bath enamel chip by the waste, filled and colour matched (before and after)
Location
Tormore (PH26)
Region
Highland
Cover
One year on every repair
Quote
From £95. Free, fixed price from pictures
Call
0345 017 0787
Last updated
23 October 2026

When a repair isn’t the answer

Not everything can be repaired, and we’d rather say so up front. We cannot fix:

  • Cracks in acrylic we can’t reach from underneath
  • A bath that moves underfoot, until its support is fixed
  • Leaking fittings, which need a plumber

If in doubt, send pictures and we will say what we think before booking.

Materials we work on in Tormore

  • Roll-top & freestanding
  • Cast iron enamel
  • Whirlpool & spa baths
  • Acrylic
  • Pressed steel enamel

Common questions in Tormore

How do I get a price for bath repair in Tormore?

Repairs from £95. Every job gets a fixed price from your photos. Send a close-up and a picture of the whole item with your PH26 postcode.

Are there extra charges for Tormore?

Travel is included in the price, with the same prices everywhere we work.

Can you match an avocado or pink bath?

Yes, we match coloured baths too. The colour is tinted by hand on the day.

I rent my home. Can I book you?

We are happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.

How quickly can you book me in?

That depends on our diary for your area. We will offer you dates when we send your quote.

What happens after I send photos?

We review the pictures and send a fixed quote.

Is a cracked acrylic bath repairable?

Most of the time. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.

Can you repair something that is been repaired before?

Generally, yes. Let us know what was used before.

Work for landlords and builders

We regularly work with letting and managing agents. Just send pictures, the address and how to get access.

We carry out planned and one-off repairs for housing associations and facilities teams in Highland and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.

Where we work around Tormore

Tormore is about 16 miles south-east of Forres, in Highland. We travel to homes and businesses in Tormore and nearby villages, so there is no workshop to go to. Tormore is one of 253 places in Highland where we work.

Here we cover the PH26 postcode area. If you’re just outside Tormore, we cover Cromdale (6 miles south-west), Charlestown of Aberlour (9 miles north-east), Grantown-on-Spey (9 miles south-west), Aberlour (9 miles north-east) and Tomintoul (10 miles south). Remote and island addresses take a little more planning, so it’s best to call first.

What’s near Tormore

A little further out are Ballindalloch Castle (2 miles east). Green spaces nearby include Loch Mhadadh.

Map of Tormore © OpenStreetMap contributors

What happens on the day

When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a morning or an afternoon. We clean up when we’re done and tell you when it’s ready to use.

  1. We protect the bath and the floor around it.
  2. The damaged area is cleaned, keyed and degreased.
  3. Filler goes in and is sanded flush once it has set.
  4. We match both the colour and the shine.
  5. We clear up and give you the curing time, normally until the next day.

Before we arrive

  • Mention if the room is upstairs or in a flat
  • Tell us about any previous repairs or coatings
  • Have somewhere for us to park nearby if possible

Ask for a price

Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and you’ll get a fixed quote back. Quotes are free and you’re under no obligation.

Send photos for a quote

Related advice

Should I try a DIY kit first?

Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

How to look after the repair

Simple care helps the repair last. Our advice:

  • Do not scrub with anything abrasive
  • If an acrylic bath flexes, have its feet adjusted
  • Fix dripping taps early to stop staining and limescale
  • Clean with warm water and a mild detergent

Care for the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.

A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.

What affects the price in Tormore

Prices start from £95. There’s no area surcharge for Tormore. The price reflects:

  • Where the damage is and how we get to it
  • Any earlier repairs that need removing first
  • The material and finish
  • Doing more than one item at once

We do not add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

Send photos for a quote

It only takes a minute to photograph the damage. Please include:

  • A coin beside the damage so we can judge size
  • Good light, ideally daylight, without flash glare
  • A clear, close picture of the problem area
  • Your postcode, so we can check dates

Upload a photo of the damage and a wider shot of the entire item, and tell us you’re in Tormore, and we will reply with a fixed quote.

Repairs by material

Acrylic

Acrylic baths are moulded sheet reinforced underneath. They don’t rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.

Cast iron

Cast iron is heavy and rigid, finished with fired enamel. A chip down to the iron can rust, but the bath itself lasts for generations, so it’s always worth repairing.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.