North Yorkshire · England
Bath chip & crack repair in Towton, North Yorkshire
We travel to Towton for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- An old repair that has yellowed or come loose
- Cracks in an acrylic bath
Signs you need bath repair in Towton
A cracked acrylic bath generally wasn’t supported properly. Legs that aren’t adjusted, a missing cradle or a soft floor let the bath move.
The most common problems we are called about are:
- Snagging damage from a refit
- Scuffs and scratches in the surface
- A chip where the taps sit
- Chips on the rim or sides
What to look for in a quote
- What happens if the damage is worse than the pictures show
- Whether cleaning and preparation are in the price
- How to care for the finish
- How long the guarantee is and what it covers
Bath repair in Towton, done in place
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Common call-outs are for a kit repair that didn’t last and chips on the rim or sides, in cast iron enamel, pressed steel enamel and whirlpool & spa baths.
You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll sort it.
- Where
- Towton (LS24)
- County
- North Yorkshire
- Cover
- A year, on every repair
- Price
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Keeping it looking good
Much of the damage we repair could have been avoided. These habits help:
- Fix dripping taps early to stop staining and limescale
- Get any new chip repaired before it rusts
- Don’t leave razors or cans standing in the bath
- Cover the bath during DIY or decorating
There’s nothing special to do after a repair. Skip bleach and gritty creams.
If water is getting through a crack, stop using the bath until it’s repaired. Water under the bath can damage the floor and the ceiling below.
Materials and what they mean for the repair
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. A chip down to the iron can rust, but the bath itself lasts for generations, so it’s always worth repairing.
Also near Towton
Also in Towton
Towton: your questions answered
What happens next?
We check the damage, the material and your postcode, then reply with a quote.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Will the price change on the day?
If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.
Can you match an avocado or pink bath?
Yes, coloured baths are no problem. The colour is tinted by hand on the day.
Do you cover the whole of North Yorkshire?
All of North Yorkshire, and the rest of the UK. There is no extra charge for travel.
What about rust by the waste?
Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
When can I have a bath again?
Most baths can be used the next day. We confirm the time before we leave.
Covering Towton
Towton is about 8 miles south-east of Wetherby, in North Yorkshire. Book a date that suits you, and you will know when to expect us, so there is no waiting around. We cover 626 places across North Yorkshire. Our jobs stretch from Towton to Leeds (12 miles away).
Jobs in LS24 work the same way as everywhere else we cover. From Rockingham Court and The Stables or anywhere nearby, we can come to you. If you are just outside Towton, we cover Stutton (1 mile north), Scarthingwell (2 miles south), Saxton (2 miles south), Ulleskelf (2 miles east) and Barkston Ash (2 miles south). Larger places within reach include Harrogate (15 miles north-west), Knaresborough (14 miles north-west), Selby (9 miles south-east), Starbeck (14 miles north-west), Harlow Hill (15 miles north-west) and Barlby (10 miles east).
What’s near Towton
For rail, the closest station is Ulleskelf station, about 2 miles east of the centre. Nearby you will also find The Ark Museum (2.4 miles north) and Kyme Castle (3.5 miles north).
For landlords and businesses
If you manage property in Towton, we can repair and quote for several addresses together. Just send photos for each address and we’ll come back with a combined price.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
How the visit works
On the day itself, there is little for you to do. Show us the job, point us to the room, and we will get on with it. Most visits take a morning or an afternoon.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, typically the following day.
Preparing for the visit
- Tell us if there are stairs or a lift
- Keep pets and children out of the room while we work
- Open a window if you can
Get a quote
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Advice
When a repair is not the answer
Honesty matters more than a booking, so here’s what a repair cannot fix:
- Leaking fittings, which need a plumber
- Cracks in acrylic we can’t reach from underneath
- A steel bath rusted through
If in doubt, send pictures and we’ll say what we think.
Materials we work on in Towton
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
What bath repair costs
Prices start from £95. There are no hourly rates or hidden extras. The price is based on:
- The colour and finish to match
- Whether we combine several jobs
- Whether old repairs or coatings need taking off
- The material
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Quotes from your pictures
Phone pictures are fine. Just make sure we can see:
- Natural light rather than flash
- The material, if you know it
- Something in shot to show the size
- Whether it’s been repaired or coated before
To get a price, send two or three photos through our quote form or call us. We will tell you honestly if a repair is the right fix.
About our accreditations · Every repair comes with a one-year guarantee.
