Cornwall · England
Bath Repair in Treworlas
Fixed-price bath repair in Treworlas and the surrounding area, normally in one visit and guaranteed for a year.
- Repairs from £95
- Damage beneath the taps
- A kit repair that didn’t last
About our bath repair in Treworlas
We repair enamelled steel, cast iron and acrylic baths. The method changes with the material: metal baths need any rust dealt with first, and acrylic cracks need support from behind. We work on roll-top & freestanding, whirlpool & spa baths and acrylic, and the jobs we see most are hairline or through cracks in acrylic and damage beneath the taps.
Big or small, you get the same one-year guarantee.
- Where
- Treworlas (TR2)
- Region
- Cornwall
- Guarantee
- 12 months on all our work
- Price
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What bath repair costs
Repairs from £95. Every quote is fixed and free. What we take into account:
- Whether we combine several jobs
- The colour and finish to match
- The type of damage
- The material and finish
We do not add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed price
Good pictures mean an accurate price. Here’s what helps:
- Where you are, by postcode
- One sharp close-up of the damage
- A wider photo showing the whole bath
- Any earlier repairs or coatings
To get a price, send a couple of photos through our quote form or ring us. We will say right away if a repair is the right fix.
Your questions about bath repair in Treworlas
Is my repair covered?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
What do you need from me?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
Is it messy?
We protect the room with dust sheets and masking first, and tidy up before we leave.
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
How do I get a price for bath repair in Treworlas?
Repairs from £95. Every job gets a fixed price from your photos. Send a close-up of the damage and a wider photo with your TR2 postcode.
Is a bath repair permanent?
Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.
Can a cracked acrylic bath be fixed?
Most of the time. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
Treworlas and nearby
Treworlas is about 6 miles south-east of Truro, in Cornwall. Our repair technicians come to customers in Treworlas, so you don’t need to take anything anywhere. We cover 644 places in Cornwall.
Our visits in TR2 are booked in the same way as anywhere else. Treworlas is on the A3078, so it’s easy for us to reach. We also cover the places around Treworlas: Veryan (1 mile north-east), Philleigh (1 mile west), Veryan Green (2 miles north-east), Tregony (4 miles north-east) and Tresillian (5 miles north-west). Larger places within reach include Truro (6 miles north-west), Newquay (15 miles north), Falmouth (7 miles south-west), St Austell (12 miles north-east), Camborne (15 miles west) and Redruth (12 miles west).
Around Treworlas
Well-known places in the area include Gerrans Parish Heritage Centre (2.6 miles south-west) and Royal Cornwall Infirmary (5.5 miles north-west). For a walk, there is Carne Beacon.
What we can’t put right
We won’t take on work that will not last, so here’s what a repair cannot put right:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Cracks in acrylic we can’t reach from underneath
- A steel bath rusted through
Send us photos and we’ll tell you honestly before you book.
Materials we work on in Treworlas
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
- Whirlpool & spa baths
- Cast iron enamel
Work for landlords and builders
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
If you manage property in Treworlas, we’ll quote for several properties at once. Send photos for each one and we’ll come back with a combined price.
Keeping it looking good
How the surface is treated afterwards matters. Here’s what we suggest:
- Store metal items away from the bath
- Rinse it down after each bath
- Keep abrasive pads and gritty cleaners away from the bath
- Have new chips seen to early
Look after the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Keep scouring pads and gritty cleaners away from it.
Tape over a fresh chip or crack until it’s repaired, so water cannot get in. Take it off before we arrive.
Also near Treworlas
What else we do in Treworlas
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
What happens on the day
We begin by going over the job with you, so you know exactly what we’re doing. After that, protection goes down around the work area and we start. You can expect it to take a few hours, depending on the damage.
- We clean the area and remove any loose enamel or rust.
- The chip or crack is filled, then sanded level with the bath.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, usually by the day after, the bath is ready to use.
Before we arrive
- Plan for the room to be out of bounds to pets and children
- Tell us about any previous repairs or coatings
- Tell us if there are stairs or a lift
Ask for a price
There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Related advice
What your bath is made of matters
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so early repairs matter.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, in much the same way.
Repair or replace: which is better?
Cast iron baths in particular are worth repairing: they’re very heavy to remove, especially upstairs, and a like-for-like replacement can be expensive. A repair keeps it in place. Prices start from £95. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
What you get with us
- No extra charge for your area
- A fixed quote before you book
- Work done at your home or business
- One-year guarantee on every repair
Read our prices page and bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
