Cornwall · England
Bath Repair for Veryan Green homes
Bath repair across Veryan Green and nearby, typically in one visit and guaranteed for a year.
- Repairs from £95
- Impact holes in acrylic
- A failed DIY repair that’s discoloured or lifting
Landlords, agents and businesses in Veryan Green
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Bath repair in Veryan Green, done in place
Most of our bath repairs take a few hours, and the bath is back in use the next day. You will not need a plumber or tiler, because nothing is disconnected. We regularly repair pressed steel enamel, whirlpool & spa baths and cast iron enamel, and common reasons people get in touch are rust by the waste and overflow and holes from dropped items.
Every repair comes with a one-year guarantee, wherever you are in Cornwall.
- Area
- Veryan Green (TR2)
- Region
- Cornwall
- Cover
- 12 months on all our work
- Quote
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What else we do in Veryan Green
Prices and what affects them
Prices start from £95. You’ll know the full cost before booking. We look at:
- Whether old repairs or coatings need taking off
- Unusual colours or finishes
- What the surface is made of
- Where the damage is and how we get to it
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.
How to get a fixed price
A couple of clear pictures is all it takes. It helps if you send:
- Your postcode, so we can check dates
- A picture taken from further back
- A clear, close picture of the problem area
- Good light, ideally daylight, without flash glare
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
The process
You do not need to empty the room. Everything we use comes in the van with us, lay protective sheets and get going once we have agreed what we’re doing. It normally takes a few hours, depending on the damage, and you’re welcome to carry on with your day while we work.
- We clean the area and remove any loose enamel or rust.
- The chip or crack is filled, then sanded level with the bath.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- We leave it to cure; you can usually use the bath the following day.
How to prepare
- Keep children and pets away from the room on the day
- Tell us if there are stairs or a lift
- Mention any parking restrictions or tricky access
How to get a price
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and you will get a fixed price back. Quotes are free and no obligation.
Read more
Common questions in Veryan Green
Which areas do you work in?
We work UK-wide, and that includes Veryan Green. Prices do not change with location.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Can landlords book you?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Can you repair a chip on a coloured bath?
Yes, we match coloured baths too. We tint the finish to your bath on site.
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we’ll tell you.
What do you need from me?
Use the quote form or ring 0345 017 0787, and we will do the rest.
Do you come to Veryan Green?
We do. We send a technician to Veryan Green for every job, and the price is the same as everywhere else.
Will the repair last?
Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.
Veryan Green and nearby
Veryan Green is about 7 miles south-east of Truro, in Cornwall. Anywhere in TR2, we carry out the work at your property. We cover all 644 towns and villages in Cornwall.
Here we cover the TR2 postcode area. We also cover the places around Veryan Green: Veryan (1 mile south-west), Treworlas (2 miles south-west), Philleigh (3 miles west), Tregony (3 miles north) and Parkengear (5 miles north). Further out, we also cover Truro (7 miles north-west), Newquay (15 miles north-west), Falmouth (9 miles south-west), St Austell (10 miles north-east), Redruth (14 miles west) and Sandy Bottom (11 miles north-east).
What’s near Veryan Green
We visit homes around Veryan CofE School, Church of St Symphorian and St Boniface's RC College. Other landmarks nearby include Caerhays Castle (3.4 miles east). For a walk, there’s Carne Beacon.
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They don’t rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
When to call us in Veryan Green
Dropped items cause the majority of chips, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: the bath isn’t properly supported, so it flexes under weight.
Common reasons people in Veryan Green contact us are:
- Chips under the taps
- Hairline or through cracks in acrylic
- A hole punched through by something heavy
- Snagging damage from a refit
What your quote should include
- What happens if they find more damage
- Whether the price is fixed and includes VAT
- Whether cleaning and preparation are in the price
- Whether there are any call-out or travel charges
Looking after it afterwards
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Give the bath a quick rinse after use
- Clean with warm water and a mild detergent
- A dripping tap stains enamel, so fix it early
- Have new chips seen to early
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust can start.
Tape over a fresh chip or crack until it’s repaired, to keep water out. Take it off before we arrive.
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
What a repair can’t fix
We will not take on work that won’t last, so here’s what a repair can’t put right:
- Leaking fittings, which need a plumber
- Wear across the entire surface, which needs re-enamelling
- A steel bath rusted through
If in doubt, send pictures and we will say what we think before booking.
Materials we repair
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
About our accreditations · Every repair comes with a one-year guarantee.
