Clackmannanshire · Scotland
Bath Repair in Tullibody
Damaged bath in Tullibody? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- A cracked acrylic bath
- Snagging damage from a refit
Bath repair in Tullibody, done in place
Most of our bath repairs take a few hours, and you can usually bathe again the following day. There is no need to book a plumber or tiler, because the bath doesn’t move. Common call-outs are for rust spots around the plughole and chips under the taps, across whirlpool & spa baths, pressed steel enamel and cast iron enamel.
You’re covered after we leave: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Area
- Tullibody (FK10)
- County
- Clackmannanshire
- Warranty
- A year, on every repair
- Price
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Questions from Tullibody
Do you do work for letting agents?
We do, regularly. We can quote for several properties together and work between tenancies.
Can you repair a chip on a coloured bath?
Yes, coloured baths are no problem. The colour is tinted by hand on the day.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Can you repair something that’s been repaired before?
Normally, yes. We remove the old repair before doing a new one.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do you work in Tullibody?
Yes, we do. We send a technician to Tullibody for every job, and the price is the same as everywhere else.
Can you repair a hole in a bath?
Normally, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.
What happens after I send pictures?
We look at the photos and reply with a fixed quote and some dates. If anything’s unclear, we’ll ask for another photo.
Landlords, agents and businesses in Tullibody
We are used to working with agents and managing companies. Send the address, pictures and access details and we’ll handle the rest.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Common problems we fix in Tullibody
Acrylic baths that crack nearly always have a support problem. Legs that are not adjusted, a missing cradle or a soft floor let the base flex until the acrylic gives way.
People generally call us after spotting one of these:
- An old repair that has yellowed or come loose
- Chips on the rim or sides
- Damage beneath the taps
- Rust spots around the plughole
Comparing quotes
- When it can be used again
- Whether cleaning and preparation are in the price
- Whether there are any call-out or travel charges
- Whether the colour is mixed to match
Also near Tullibody
Other services in Tullibody
What we cannot put right
We’ll always be straight with you, so here’s what a repair will not do:
- A bath worn all over, where resurfacing makes more sense
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Metal that has corroded all the way through
If in doubt, send pictures and we’ll say what we think.
Materials we work on in Tullibody
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
- Whirlpool & spa baths
What happens on the day
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job usually takes two to three hours for most chips. We clean up when we are done and tell you when it’s ready to use.
- We start by cleaning the damage and taking out loose enamel and rust.
- The chip or crack is filled, then sanded level with the bath.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can generally use the bath the day after.
Getting ready for the visit
- Mention any parking restrictions or tricky access
- Plan for the room to be out of bounds to pets and children
- Have a window or extractor fan available
Get a quote
There’s no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Related advice
Tullibody and nearby
Tullibody is about 2 miles north-west of Alloa, in Clackmannanshire. Anywhere in FK10, a technician comes to you. We cover all 16 towns and villages across Clackmannanshire, from the larger towns to small villages. We work right across the region, from Tullibody to Glasgow (26 miles away).
Our visits in FK10 work the same way as everywhere else we cover. We regularly work on streets such as Main Street, Delph Road and The Tannery and the roads around them. We also cover the places around Tullibody: Cambus (1 mile south-west), Menstrie (1 mile north-west), Alva (2 miles north-east), Manor Powis (2 miles west) and South Alloa (2 miles south-east). Larger places within reach include Tillicoultry (4 miles east), Kincardine (6 miles south-east), Dollar (7 miles east), Clackmannan (4 miles south-east) and Coalsnaughton (4 miles east).
Around Tullibody
In Tullibody, that means homes near Dunmar House Hotel, Lornshill Academy and Tullibody Old Kirk, among other places. For rail, the closest station is Alloa station, about 2.1 miles south-east. Nearby you’ll also find Tullibody Heritage Museum (within half a mile south) and Stirling Castle (4.4 miles west). Green spaces nearby include Airthrey Loch and Myreton Hill.
Repair or replace in Tullibody?
Replacing a bath rarely stops at the bath: the tiles sitting on the rim tend to break, a new panel is frequently needed, and the plumbing has to be disconnected and refitted. A repair skips all of it. Repairs from £95, with every job priced individually. The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed quote from your pictures, so there are no surprises on the day.
Why us?
- Fixed prices from your photos
- We leave the room as we found it
- Generally one visit, start to finish
- We will tell you if it’s not worth repairing
Take a look at our prices page and bath cost comparison.
Keeping it looking good
A little care keeps the finish looking good. We recommend:
- Avoid scourers, wire wool and gritty cream cleaners
- Stick to mild cleaners and a soft cloth
- A dripping tap stains enamel, so fix it early
- Don’t leave razors or cans standing in the bath
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust sets in.
Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and it can start to leak underneath.
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
About our accreditations · Every repair comes with a one-year guarantee.
