Clackmannanshire · Scotland

Bath chip & crack repair in Dollar, Clackmannanshire

Bath repair in Dollar without the cost of replacing. Get a fixed quote from your photos, then we come to you.

  • Repairs from £95
  • Damage beneath the taps
  • Scratches you can feel with a fingernail
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Dollar

Bath repair in Dollar, done in place

Small damage on a bath is worth repairing early. Exposed metal on enamelled baths soon rusts, while cracks in acrylic grow each time the bath moves. Repairing it stops the damage getting worse. Common call-outs are for rust spots around the plughole and impact holes in acrylic, in cast iron enamel, pressed steel enamel and acrylic.

We stand behind the work with a one-year guarantee, so you are not left on your own once we’ve gone.

Before and after: a damaged acrylic bath corner repaired in place
Area
Dollar (FK14)
Area hub
Clackmannanshire
Warranty
One year on every repair
Price
From £95. Free and fixed, from your photos
Telephone
0345 017 0787
Last updated
23 October 2026

The process

When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take two to three hours for most chips. We tidy up before we leave and tell you when it’s ready to use.

  1. We protect the bath and the floor around it.
  2. We clean, key and degrease the damage, and any rust is treated.
  3. We fill it, let it set, then sand it flush.
  4. We match both the colour and the shine.
  5. We clear up and give you the curing time, normally until the day after.

Preparing for the visit

  • Keep pets and children out of the room while we work
  • Make sure the area is dry
  • Clear the area around the damage

Get a quote

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price the same day in most cases.

Get a fixed price

Read more

Covering Dollar

Dollar is about 6 miles north-east of Alloa, in Clackmannanshire. Our repair technicians come to homes and businesses in Dollar and nearby villages, so nothing has to leave your home. We work in all 16 towns and villages across Clackmannanshire, from the larger towns to small villages. We work right across the region, from Dollar to Edinburgh (24 miles away).

Our repair technicians cover all of the FK14 postcode area and the streets around it. From Station Road, High Street and Manse Road or a nearby road, we can come to you. Dollar sits on or near the A91 and B913, which makes travel easy. If you are just outside Dollar, we cover Blairingone (1 mile south-east), Tillicoultry (3 miles west), Pool of Muckhart (3 miles north-east), Devonside (3 miles south-west) and Coalsnaughton (3 miles south-west). Larger places within reach include Alloa (6 miles south-west), Tullibody (7 miles west), Kincardine (7 miles south), Alva (5 miles west), Clackmannan (5 miles south-west) and Sauchie (5 miles south-west).

Landmarks near Dollar

Around Dollar, we work in homes near Dollar Arms and Old Parish Church. Further afield, we also cover the area around Castle Campbell (0.8 miles north). For a walk, there’s King's Seat Hill and Gartmorn Dam Country Park and Nature Reserve.

Map of Dollar © OpenStreetMap contributors

Common problems we fix in Dollar

Most bath damage comes from something dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On enamelled baths, any chip down to the metal lets water in, and rust follows.

Typical reasons for a call-out include:

  • Impact holes in acrylic
  • Scratches you can feel with a fingernail
  • Rust by the waste and overflow
  • Cracks in an acrylic bath

What your quote should include

  • The length of the guarantee and what it covers
  • Whether the price covers travel
  • How changes to the job are handled
  • How to look after the finish

10 questions to ask before booking

Prices and what affects them

Prices start from £95. A fixed quote means you know the cost before you book. We take into account:

  • What the surface is made of
  • How many areas need work
  • Access to the area
  • How many items we do on one visit

The price depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed quote from your pictures, so there are no surprises on the day.

Quotes from your pictures

It only takes a minute to photograph the damage, and it saves a visit. Please include:

  • A clear, close picture of the problem area
  • Where you are, by postcode
  • Any earlier repairs or coatings
  • A coin or ruler next to the damage for scale

Send us pictures of the damage and a wider shot of the entire item, with your FK14 postcode, and we will come back with a fixed quote.

How to care for the repair

Looking after the surface is easy:

  • Avoid scourers, wire wool and gritty cream cleaners
  • Fix dripping taps early to stop staining and limescale
  • Stick to mild cleaners and a soft cloth
  • Have new chips seen to early

For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine, avoiding abrasives.

Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.

Dollar questions

Can pets and children be at home?

Yes, as long as they stay out of the room we’re working in. We’ll tell you when the room can be used again.

Do you do work for letting agents?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Clackmannanshire.

Can you repair a chip on a coloured bath?

Yes. The colour is mixed on site to suit your bath, including older coloured suites.

What does bath repair cost?

Prices start from £95. We give a fixed quote based on pictures of the damage. Send a close-up and a picture of the entire item and your postcode.

Can I get a quote without a visit?

Yes, almost always. Clear photos let us give you a fixed price without visiting.

What areas do you cover?

We work UK-wide. Prices don’t change with location.

I’m a tenant. Can you help?

Of course. Check with your landlord; we can send the quote to them too.

Is repairing better than replacing?

In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.

Different materials, different repairs

Pressed steel

Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.

Cast iron

Cast iron baths are thick and very strong, finished with fired enamel. A chip down to the iron can rust, but the bath itself lasts for generations, which makes it well worth repairing.

Repair or replace: which is better?

If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. Where the whole surface is tired, we may suggest re-enamelling instead. Repairs from £95, with every job priced individually. Our prices are the same across the UK, so there is no premium for Dollar. What changes the price is the job itself: the material, the amount of damage and how many items.

What you get with us

  • CHAS and Constructionline accredited
  • One price list for the entire UK
  • Colour mixed on the day to match
  • A year’s guarantee on all work

Read our pricing or guide to resurfacing and replacement costs.

DIY kit or professional repair?

Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.

We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.

What a repair can’t fix

It helps to know what we cannot do too:

  • Cracks in parts of an acrylic bath we cannot get to from below
  • Rust that has eaten right through a steel bath
  • Wear across the whole surface, which needs re-enamelling

If in doubt, send pictures and we will say what we think.

What we work on

  • Acrylic
  • Cast iron enamel
  • Pressed steel enamel
  • Roll-top & freestanding
  • Whirlpool & spa baths
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.