Clackmannanshire · Scotland
Bath Repair in Alloa
Our repair technicians come to Alloa for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- Deep scratches in acrylic
- Rust spots around the plughole
What a repair cannot fix
A few problems are outside what a surface repair can do:
- A bath that moves underfoot, until its support is fixed
- Cracks in acrylic we cannot reach from underneath
- Wear across the entire surface, which needs re-enamelling
If in doubt, send photos and we’ll say what we think.
Surfaces we repair
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
How we handle bath repair in Alloa
We’ve repaired just about every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. Each is repaired in place. We regularly repair whirlpool & spa baths, pressed steel enamel and cast iron enamel, and people most often call us about a cracked acrylic bath and a chipped rim or side.
You get a one-year guarantee, the same in Alloa as everywhere else we work.
- Where
- Alloa (FK10)
- Area hub
- Clackmannanshire
- Cover
- A year, on every repair
- Price
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Prices and what affects them
Repairs from £95. There’s no area surcharge for Alloa. The price reflects:
- What the surface is made of
- How much damage there is
- Any earlier repairs that need removing first
- Unusual colours or finishes
We do not add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Quotes from your photos
You can normally get a fixed price without us visiting. To help us price it:
- Whether it’s been repaired or coated before
- A coin or ruler next to the damage for scale
- A wider photo showing the entire bath
- Good light, ideally daylight, without flash glare
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.
Looking after it afterwards
A little care keeps the finish looking good. We recommend:
- Stick to mild cleaners and a soft cloth
- Don’t scrub with anything abrasive
- Rinse the bath after use, especially in hard water areas
- Get any new chip repaired before it rusts
Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust sets in.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.
Repairing versus replacing in Alloa
Cast iron baths especially are worth keeping: they’re very heavy to remove, especially upstairs, and replacing like for like isn’t cheap. Repairing it leaves it where it is. Prices start from £95. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.
Why choose Surface Doctor in Alloa
- Free fixed quotes from pictures
- Every repair guaranteed for a year
- No need to remove anything
- Same prices wherever you are
See our pricing or guide to resurfacing and replacement costs.
Repairs by material
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They do not rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. Chips can rust if left, but the body of the bath lasts a very long time, so it’s always worth repairing.
FAQs for Alloa
Can tenants book a repair?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Can I add another job to the visit?
Yes, and it’s often cheaper. Send pictures of everything together and you’ll get one combined price.
Do you charge for travel?
There is no separate call-out charge. Your fixed quote includes everything.
When can I have a bath again?
Most baths can be used the next day. We will tell you the exact curing time when we finish.
What happens once I’ve sent photos?
We review the photos and send a fixed quote and the next dates we have.
How invisible is a bath repair?
On a glossy bath, you’ll struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
Will the repair last?
It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.
Which areas do you work in?
The entire UK, including all of Clackmannanshire. Send your postcode with your photos and we’ll offer you dates.
What we’re called out for in Alloa
Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, any chip down to the metal will start to rust.
Get in touch if you’ve noticed:
- A kit repair that didn’t last
- A cracked acrylic bath
- Deep scratches in acrylic
- Snagging damage from a refit
Before you book anyone
- How long the guarantee is and what it covers
- How the room is protected while they work
- Whether there are any call-out or travel charges
- What aftercare is recommended
Where we work around Alloa
Alloa is about 14 miles west of Dunfermline, in Clackmannanshire. Jobs in Alloa are booked in like any other job: a fixed quote from pictures, then a visit to do the work. Alloa is one of 16 places in Clackmannanshire where we work. Our nearest city page is Glasgow, about 26 miles away.
Our visits in FK10 are booked in the same way as anywhere else. Streets in the area include High Street, Holton Square and Main Street, all of which we cover. Alloa is on the A907 and A908, which makes it straightforward to reach. If you’re just outside Alloa, we cover Sauchie (1 mile north-east), Fishcross (1 mile north-east), Clackmannan (2 miles south-east), Coalsnaughton (3 miles north-east) and Devonside (3 miles north-east). Larger places within reach include Kincardine (5 miles south-east), Dollar (6 miles north-east) and Menstrie (3 miles north-west).
Near you in Alloa
Typical jobs here are in homes near Alloa North Church, Alloa Academy and The Bobbing John pub. There’s a railway station in Alloa itself: Alloa station. Well-known places in the area include Old Tulliallan Castle (3.8 miles south-east) and Alloa Museum And Gallery (within half a mile south). The countryside around Alloa includes Black Devon Wetlands RSPB Reserve and Myreton Hill.
What we do, step by step
You do not need to empty the room beforehand. Everything we use comes in the van with us, put protection down and start once you’re happy with the plan. Most jobs take a few hours, and you are welcome to carry on with your day while we work.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, normally the day after.
How to prepare
- Avoid using the area for a few hours before we arrive
- Mention if the room is upstairs or in a flat
- Move bottles, mats and clutter away from the area
How to get a price
We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Advice
What else we do in Alloa
Landlord and trade work in Alloa
If you manage property in Alloa, we can repair and quote for several addresses together. Just send photos for each address and we will come back with a combined price.
Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.
About our accreditations · Every repair comes with a one-year guarantee.
