Northamptonshire · England
Bath Repair for Turweston homes
Chip and crack repairs to enamel, acrylic and cast iron baths in Turweston, carried out at your home and guaranteed for a year.
- Repairs from £95
- A hole punched through by something heavy
- Cracks in an acrylic bath
Looking after it afterwards
Looking after the surface is easy:
- Ensure an acrylic bath is firm underfoot
- Rinse the bath after use, especially in hard water areas
- Protect the bath with a towel when doing jobs nearby
- Do not leave razors or cans standing in the bath
A repaired bath needs no special treatment. Avoid bleach-based and gritty cleaners and rinse after use.
Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.
Bath repair at your home in Turweston
Bath repair is our most common job. Chips on the rim, rust around the waste and cracks in acrylic are all fixed without removing the bath, normally in one visit. We work on cast iron enamel, acrylic and roll-top & freestanding, and people most frequently call us about snagging damage from a refit and a failed DIY repair that’s discoloured or lifting.
You are covered for a year from the day of the repair. If anything is not right, ring us and we’ll sort it.
- Area
- Turweston (NN13)
- Area hub
- Northamptonshire
- Cover
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
When a repair is not the answer
Some jobs are not right for a repair, for example:
- Cracks in parts of an acrylic bath we cannot get to from below
- A steel bath rusted through
- A whole bath that is dull or worn, where a full re-enamel is the better fix
Not sure? Send photos and we’ll give you a straight answer.
Materials we work on in Turweston
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
The process
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a morning or an afternoon. We clean up when we’re done and tell you when it’s ready to use.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the next day.
Preparing for the visit
- Tell us if there are stairs or a lift
- Tell us about any previous repairs or coatings
- Make sure the room can be ventilated
Ask for a price
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price.
Related advice
For landlords and businesses
Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
Questions from Turweston
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
How quickly can you book me in?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Is there any odour?
It depends on the job, but often a little. Open windows and an extractor fan help, and it soon fades.
Can you repair a crack in an acrylic bath?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
How do I book?
Photos of the damage, a picture of the entire bath and your postcode. Then we will agree a date.
Do you work in Turweston?
Yes. We work across the UK and travel to Turweston and the rest of Northamptonshire. Send photos and we’ll quote, or call 0345 017 0787.
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
How we price bath repair
Repairs from £95. A fixed quote means you know the cost before booking. We look at:
- Whether we combine several jobs
- Previous DIY repairs that have to come out
- The material and finish
- How hard the colour is to match
Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
Send pictures for a quote
We price nearly every job from pictures. This is what we need:
- Any earlier repairs or coatings
- A coin beside the damage so we can judge size
- What it’s made of, if you know
- Good light, ideally daylight, without flash glare
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.
Repairs by material
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so repair chips early.
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches can be filled and colour matched, in much the same way.
What we’re called out for in Turweston
Rust usually starts where water sits, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.
Most people get in touch after spotting one of these:
- Hairline or through cracks in acrylic
- A kit repair that didn’t last
- Chips under the taps
- Damage done while the bathroom was being fitted
What to look for in a quote
- What the guarantee covers, and for how long
- Aftercare advice
- If travel is included in the price
- Whether they match the colour on site
DIY repairs versus a professional job
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
What else we do in Turweston
Turweston and nearby
Turweston is about 1 mile east of Brackley, in Northamptonshire. Across the NN13 area, we come to you. We cover 364 places across Northamptonshire. You can also see our page for Birmingham, about 44 miles away.
Our visits in NN13 are booked in the same way as anywhere else. Streets in the area include Main Street, South Bank and Chapel Lane, all of which we cover. Neighbouring places we cover include Brackley (1 mile west), Whitfield (1 mile north), Evenley (2 miles south-west), Mixbury (2 miles south) and Helmdon (4 miles north). We also work in nearby towns such as Towcester (9 miles north-east), Wolverton (13 miles east), Stony Stratford (12 miles east), East Hunsbury (15 miles north-east), Wootton (15 miles north-east) and Middleton Cheney (7 miles north-west).
Near you in Turweston
Typical jobs here are in homes near Church of St Mary, Magdalen College School and Stratton Arms, among other places. Other landmarks nearby include Beaumont Castle (2.2 miles south) and Brackley Community Hospital (0.7 miles west).
About our accreditations · Every repair comes with a one-year guarantee.
