Lancashire · England
Bath Repair in Ulnes Walton
Our technicians come to Ulnes Walton for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- Cracks in an acrylic bath
- An old repair that has yellowed or come loose
Bath repair at your home in Ulnes Walton
Small damage on a bath is worth repairing early. On steel and cast iron, exposed metal starts to rust, while cracks in acrylic grow each time the bath moves. A repair stops both. Common call-outs are for cracks in an acrylic bath and damage beneath the taps, across whirlpool & spa baths, acrylic and pressed steel enamel.
Whatever the size of the job, it’s backed by a one-year guarantee in Ulnes Walton and across Lancashire.
- Area
- Ulnes Walton (PR7, PR26)
- County
- Lancashire
- Guarantee
- A year, on every repair
- Price
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What bath repair costs
Prices start from £95. A fixed quote means you know the cost before booking. We take into account:
- Whether we combine several jobs
- How much damage there is
- What the surface is made of
- Unusual colours or finishes
Our prices are the same across the UK, so there’s no premium for Ulnes Walton. The job itself decides the price: the material, the amount of damage and how many items.
How to get a fixed price
Good photos mean an accurate price. Here’s what helps:
- One picture of the whole bath
- Your postcode, so we can check dates
- Daylight if possible, and no flash reflection
- A close-up of the damage, in focus
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed price. Quotes are free and no obligation.
Landlord and trade work in Ulnes Walton
Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Covering Ulnes Walton
Ulnes Walton is about 3 miles south-west of Leyland, in Lancashire. Book a date that suits you, and you will know when to expect us, so there’s no waiting around. Our technicians cover 482 places across Lancashire. Our jobs stretch from Ulnes Walton to Liverpool (19 miles away).
Here we cover the PR7 and PR26 postcode area. From Lydiate Lane, Southport Road and New Lane or anywhere nearby, we can come to you. With the A581 close by, Ulnes Walton is simple for us to get to. We also travel to Shaw Green (1 mile east), Eccleston (1 mile south), Wymott (1 mile north-west), Croston (2 miles west) and Heskin (2 miles south). Within a short drive, we also cover Preston (7 miles north), Chorley (4 miles east), Lytham St Anne's (13 miles north-west), Bamber Bridge (5 miles north-east), Leyland (3 miles north-east) and Fulwood (9 miles north).
What’s near Ulnes Walton
Around Ulnes Walton, we work in homes near Worden Park, Church of the Blessed Virgin Mary and Eccleston Primary School. For rail, the closest station is Croston station, about 1.9 miles west of the centre. Other landmarks nearby include British Commercial Vehicle Museum (2.7 miles north-east) and Chorley and South Ribble District General Hospital (4 miles east). For a walk, there’s Mere Sands Wood.
Honest limits
Honesty matters more than a booking, so here’s what a repair will not do:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Leaking fittings, which need a plumber
- Acrylic cracks with no access behind them
Send us photos and we’ll tell you honestly before you book.
Surfaces we repair
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
Your questions about bath repair in Ulnes Walton
Can you repair a crack in an acrylic bath?
Often, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a photo.
Will the price change on the day?
We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.
Will the repair last?
It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.
Can you repair a failed DIY repair?
Yes. We remove the old filler and start again. Mention it when you send photos.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
What happens next?
We review the photos and send a fixed quote and the next dates we have.
Do I need to be at home?
Someone needs to let us in and show us the job. You do not need to watch us work.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as householders.
Aftercare tips
Aftercare is simple:
- Avoid scourers, wire wool and gritty cream cleaners
- Stick to mild cleaners and a soft cloth
- A dripping tap stains enamel, so fix it early
- Store metal items away from the bath
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust can start.
Don’t leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
How the visit works
We work cleanly and quietly, so you can stay at home while we are there. We protect the area first, then the work takes a few hours, depending on the damage. At the end we talk you through the curing time and the aftercare.
- First, the area is cleaned and any loose enamel or rust is removed.
- The chip or crack is filled, then sanded level with the bath.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can typically use the bath the day after.
How to prepare
- Clear the area around the damage
- Avoid using the area for a few hours before we arrive
- Let us know if it has been repaired before
Ask for a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them over. You’ll get a fixed price, not an estimate.
Related advice
Do you need bath repair in Ulnes Walton?
Acrylic baths that crack nearly always have a support problem. Loose legs, no proper cradle or a floor that gives let the bath move.
Most people get in touch after spotting one of these:
- A cracked acrylic bath
- Deep scratches in acrylic
- Holes from dropped items
- Rust by the waste and overflow
What your quote should include
- What protection goes down before work starts
- What happens if the damage is worse than the photos show
- How the colour is matched
- Whether the price covers travel
What else we do in Ulnes Walton
Repair or replace in Ulnes Walton?
A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it’s done in one visit, and nothing else in the room changes. Repairs from £95, with every job priced individually. We do not add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why book with us
- Dust sheets down, tidy finish
- One visit for most repairs
- Nothing taken out or refitted
- CHAS and Constructionline accredited
See our pricing and bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
