West Berkshire · England
Bath Repair for Upper Lambourn homes
Bath repair in and around Upper Lambourn: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Repairs from £95
- A kit repair that didn’t last
- Chips along the edge of the bath
How we handle bath repair in Upper Lambourn
Most bath damage, from chips and cracks to rust spots and holes, can be repaired with the bath left exactly where it is. Nothing is unplumbed, the tiles aren’t touched, and the repaired area is colour-matched so it blends in. We work on acrylic, pressed steel enamel and roll-top & freestanding, and the jobs we see most are chips under the taps and holes from dropped items.
All of our repairs are guaranteed for twelve months. If something goes wrong with the work, we come back.
- Location
- Upper Lambourn (RG17)
- Area hub
- West Berkshire
- Cover
- A year, on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Where we work around Upper Lambourn
Upper Lambourn is about 7 miles south-west of Wantage, in West Berkshire. Our technicians come to homes and businesses in Upper Lambourn, so nothing has to leave your home. We cover all 155 towns and villages across West Berkshire. Our nearest city page is London, about 63 miles away.
Every address in RG17 is covered. Jobs here include addresses on High Street and Maddle Road. Nearby, we also work in Lambourn (1 mile south-east), Sheepdrove (2 miles east), Woolstone (5 miles north), Kingston Lisle (5 miles north) and Westcot (5 miles north). We also work in nearby towns such as Newbury (13 miles south-east), Thatcham (15 miles south-east), Speenhamland (13 miles south-east), Hungerford (8 miles south), Shaw (13 miles south-east) and Wash Common (14 miles south-east).
Landmarks near Upper Lambourn
Our clients here include homes close to The Malt Shovel pub and the streets around them. The countryside around Upper Lambourn includes Seven Barrows and Rams Hill.
How it works
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the job takes a few hours, depending on the damage, depending on what we find, and we finish by cleaning up and talking you through the result.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the next day.
Getting ready for the visit
- Mention any parking restrictions or tricky access
- Keep a parking space free if you can
- Plan for the room to be out of bounds to pets and children
Ask for a price
If you are in Upper Lambourn and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Read more
Work for landlords and builders
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
We are used to working with agents and managing companies. Just send photos, the address and how to get access.
When to call us in Upper Lambourn
Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On enamelled baths, any chip down to the metal will start to rust.
Clients normally contact us about:
- Hairline or through cracks in acrylic
- Impact holes in acrylic
- Scuffs and scratches in the surface
- Chips on the rim or sides
Before booking anyone
- Whether the price is fixed and includes VAT
- When it can be used again
- The length of the guarantee and what it covers
- Aftercare advice
Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches can be filled and colour-matched, in much the same way.
Aftercare tips
Looking after the surface is easy, and it makes a real difference:
- If an acrylic bath flexes, have its feet adjusted
- Get a dripping tap fixed promptly
- Have new chips seen to early
- Rinse the bath after use, especially in hard water areas
Give the repair the full curing time we recommend before using the bath. After that, gentle cleaning keeps it looking good.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
How we price bath repair
Repairs from £95. Each job gets its own fixed price. These are the things that affect it:
- Access to the area
- Previous DIY repairs that have to come out
- Whether it’s a chip, crack, burn or wear
- The material
There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed quote
It only takes a minute to photograph the damage. Try to send:
- Any earlier repairs or coatings
- A clear, close picture of the problem area
- Good light, ideally daylight, without flash glare
- The postcode, so we can plan the visit
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote without visiting.
Nearby places to Upper Lambourn
Other services in Upper Lambourn
Should you replace it?
When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. If the whole surface is worn, re-enamelling may make more sense, and we will tell you. Repairs from £95, with every job priced individually. Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.
Why us?
- Fixed prices from your photos
- Every repair guaranteed for a year
- We will tell you if it’s not worth repairing
- Usually one visit, start to finish
Read our pricing or guide to resurfacing and replacement costs.
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Upper Lambourn: your questions answered
How quickly can you book me in?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
What information do you need?
Send photos through the quote form or call 0345 017 0787.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
Do you do work for letting agents?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Upper Lambourn.
Are there extra charges for Upper Lambourn?
Travel is included in the price, with the same prices everywhere we work.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is repairing better than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
Do you work in Upper Lambourn?
Yes. We work across the UK and travel to Upper Lambourn and the rest of West Berkshire. Send pictures and we will quote, or call 0345 017 0787.
About our accreditations · Every repair comes with a one-year guarantee.
