Oldham · England

Bath chip & crack repair in Uppermill, Oldham

Damaged bath in Uppermill? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.

  • Repairs from £95
  • Chips along the edge of the bath
  • A hole punched through by something heavy
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Uppermill

Bath repair at your home in Uppermill

Whatever the damage, the aim is the same: a smooth, solid repair that blends in. Proper preparation, careful filling and shaping, then colour and gloss matching so it’s level with the surrounding surface. We work on whirlpool & spa baths, cast iron enamel and roll-top & freestanding, and people most often call us about scratches you can feel with a fingernail and chips along the edge of the bath.

Your repair is guaranteed for a year, as with every job we do.

Rusty chip next to a bath plughole, before and after repair
Location
Uppermill (OL3)
Area hub
Oldham
Guarantee
12 months on all our work
Quote
From £95. Fixed and free, based on photos
Telephone
0345 017 0787
Last updated
23 October 2026

Can I fix it myself?

For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

How we price bath repair

Prices start from £95. You won’t pay by the hour. The price depends on:

  • The size and number of damaged areas
  • Whether we combine several jobs
  • What kind of damage it is
  • The material and finish

It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.

Quotes from your photos

The better the pictures, the more accurate the price. Here’s what helps:

  • One picture of the whole bath
  • What it’s made of, if you know
  • A coin beside the damage so we can judge size
  • Natural light rather than flash

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote without visiting.

Uppermill and nearby

Uppermill is about 4 miles north-east of Stalybridge, in Oldham. We visit clients in Uppermill, so nothing has to leave your home. Uppermill is one of 72 towns and villages in Oldham where we work. Our jobs stretch from Uppermill to Manchester (10 miles away).

We work across the OL3 postcode area and the streets around it. That includes homes on Station Road, High Street and Church Road and the roads around them. Uppermill is on the A6051, so it’s easy for us to reach. Neighbouring places we cover include Friezland (1 mile south-west), Greenfield (1 mile north), Grasscroft (1 mile west), Dobcross (1 mile north) and Wall Hill (1 mile north-west). Further out, we also cover Oldham (4 miles west), Chadderton (6 miles west), Royton (5 miles west), Failsworth (7 miles west), Shaw (5 miles north-west) and Coppice (5 miles west).

Near you in Uppermill

Typical jobs here are in homes near Saddleworth School, St Chad's House and The Hare and Hounds Public House and the streets around them. Nearby too are St Chad's Parish Centre (0.5 miles north) and Greenfield Primary School (less than half a mile south-west). Uppermill has its own railway station: Greenfield station. Nearby you’ll also find Tameside General Hospital (4.2 miles south-west) and Mossley (2 miles south-west). Open spaces near Uppermill include Pots and Pans Hill and Swallows Wood.

Map of Uppermill © OpenStreetMap contributors

When we’d advise against a repair

Before you book, it’s worth knowing the limits too:

  • Cracks in acrylic we cannot reach from underneath
  • Rust that has eaten right through a steel bath
  • A bath that flexes because its feet or cradle have failed (that needs fixing first)

Send us pictures and we will tell you honestly before booking.

Surfaces we repair

  • Roll-top & freestanding
  • Whirlpool & spa baths
  • Acrylic
  • Pressed steel enamel
  • Cast iron enamel

What happens on the day

Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which normally takes two to three hours for most chips. If anything looks different from your photos, we’ll talk to you before going ahead.

  1. Dust sheets and masking go down around the bath.
  2. We clean, key and degrease the damage, and any rust is treated.
  3. Filler goes in and is sanded flush once it has set.
  4. We match both the colour and the shine.
  5. We clear up and give you the curing time, normally until the next day.

Preparing for the visit

  • Clear toiletries, mats and anything else from around the area
  • Tell us if there are stairs or a lift
  • Keep children and pets away from the room on the day

Get a quote

You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.

Get a free quote

Related advice

Questions from Uppermill

What does bath repair cost?

Repairs from £95. Because every job differs, we price from photos. You know the full cost before anything is booked.

Can you redo someone else’s repair?

Generally, yes. Let us know what was used before.

Can rust on a bath be repaired?

Yes, very often. The rust is cut back to clean metal and sealed before we fill and finish it.

Is a bath repair durable?

A properly prepared repair should last a long time, and ours come with a one-year guarantee. Gentle cleaning helps it last.

I rent my home. Can I book you?

Of course. Ask your landlord first, and we can send them the quote if that helps.

Is my repair covered?

Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.

Can you repair a chip on a coloured bath?

Yes, coloured baths are no problem. We tint the finish to your bath on site.

Something went through my bath. Can it be fixed?

Normally. Send us a picture of the hole and one from under the bath if you can.

Signs you need bath repair in Uppermill

Nearly all the chips we see start with something being dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On steel and cast iron baths, any chip down to the metal will start to rust.

Most people get in touch after spotting one of these:

  • An old repair that has yellowed or come loose
  • Holes from dropped items
  • Scuffs and scratches in the surface
  • Rust spots around the plughole

Comparing quotes

  • Whether there are any call-out or travel charges
  • How changes to the job are handled
  • Whether they match the colour on site
  • Whether a trained technician does the job

10 questions to ask before you book

Aftercare tips

Simple care helps the repair last. Our advice:

  • Use a soft cloth and washing-up liquid for everyday cleaning
  • Check that an acrylic bath doesn’t move when you stand in it
  • Avoid scourers, wire wool and gritty cream cleaners
  • Store metal items away from the bath

In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine.

Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.

What your bath is made of matters

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.

Acrylic

Acrylic baths are moulded sheet reinforced underneath. They don’t rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.

Should you replace it?

A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, a new panel is often needed, and the plumbing has to be disconnected and refitted. A repair skips all of it. Prices start from £95. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.

Why Uppermill clients choose us

  • CHAS, Constructionline and SafeContractor accredited
  • We’ll tell you if it’s not worth repairing
  • No need to remove anything
  • Colour-matched on site

Read our prices page and bath cost comparison.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.