Oldham · England

Bath chip & crack repair in Wall Hill, Oldham

Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Wall Hill and across Oldham. Free, fixed quotes from your pictures.

  • Repairs from £95
  • Impact holes in acrylic
  • Hairline or through cracks in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair for Wall Hill homes

About our bath repair in Wall Hill

Chips, cracks, rust spots and small holes is repaired in place. There is no plumbing to disconnect, the tiles are not touched, and the repaired area is colour matched so it blends in. If you are dealing with a kit repair that didn’t last and damage done while the bathroom was being fitted, we can normally put it right, on roll-top & freestanding, whirlpool & spa baths and cast iron enamel alike.

The work is covered for a year after we finish. If anything is not right, ring us and we will come back.

Before and after: a damaged acrylic bath corner repaired in place
Where
Wall Hill (OL3)
County
Oldham
Cover
One year on every repair
Quote
From £95. Free, fixed quote from pictures
Call
0345 017 0787
Last updated
23 October 2026

What bath repair costs

Repairs from £95. We charge the same across the UK, including Wall Hill. The price reflects:

  • How easy the damage is to reach
  • Any earlier repairs that need removing first
  • What kind of damage it is
  • The size and number of damaged areas

Our prices are the same across the UK, so there’s no premium for Wall Hill. The job itself decides the price: how much damage, what it’s made of and how many items.

Quotes from your pictures

You can normally get a fixed price without us visiting. To help us price it:

  • Your postcode, so we can check dates
  • One picture of the whole bath
  • A clear, close picture of the problem area
  • Any details about the material

For a price in Wall Hill, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

Repair or replace: which is better?

Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Our bath repair starts from £95. Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it, and doing several items at once reduces it.

Why Wall Hill customers choose us

  • Colours mixed by hand to suit your surface
  • No need to remove anything
  • One visit for most repairs
  • We will tell you if it’s not worth repairing

Take a look at our pricing and bath cost comparison.

How the visit works

Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which usually takes a few hours. If we find something your photos didn’t show, we’ll explain it before carrying on.

  1. We protect the bath and the floor around it.
  2. We clean, key and degrease the damage.
  3. We fill it, let it set, then sand it flush.
  4. Colour and gloss are matched to the surrounding surface.
  5. We tidy up and tell you when the bath can be used, normally the day after.

Before we arrive

  • Keep children and pets away from the room on the day
  • Let the surface dry out before the visit
  • Have somewhere for us to park nearby if possible

Getting a price

No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.

Get a fixed quote

Advice

DIY repairs versus a professional job

It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.

Honest limits

To be straight with you, there are a few things a repair will not fix:

  • A bath that flexes because its feet or cradle have failed (that needs fixing first)
  • A whole bath that is dull or worn, where a full re-enamel is the better fix
  • Leaking fittings, which need a plumber

If in doubt, send photos and we’ll say what we think before you book.

What we work on

  • Acrylic
  • Roll-top & freestanding
  • Whirlpool & spa baths
  • Cast iron enamel
  • Pressed steel enamel

Work for landlords and builders

We carry out planned and one-off repairs for housing associations and facilities teams in Oldham and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.

For anyone letting property in or around Wall Hill, we’ll quote for several properties at once. Just send pictures for each address and we will price them together.

Signs you need bath repair in Wall Hill

Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.

These are the problems we’re asked about most:

  • A hole punched through by something heavy
  • A chipped rim or side
  • An old repair that has yellowed or come loose
  • Snagging damage from a refit

Comparing quotes

  • What protection goes down before work starts
  • Whether there are any call-out or travel charges
  • How the colour is matched
  • What happens if the damage is worse than the photos show

Choosing a repair company

Where we work around Wall Hill

Wall Hill is about 2 miles north-east of Lees, in Oldham. We agree a date that works for you, and you’ll know when to expect us, so you are not left waiting in all day. Wall Hill is one of 72 towns and villages in Oldham we cover. You can also see our page for Manchester, about 10 miles away.

Every address in OL3 is within our area, from the main roads to the quietest streets. That includes homes on Wall Hill Road, Broadgate and Oldham Road and the roads around them. We also travel to Rough Knarr (1 mile north-west), Dobcross (1 mile east), Doctor Lane Head (1 mile west), New Houses (1 mile south-west) and Delph (1 mile north). We also work in nearby towns such as Oldham (3 miles west), Chadderton (5 miles west), Royton (4 miles west), Failsworth (6 miles south-west), Shaw (3 miles north-west) and Coppice (4 miles south-west).

Local landmarks in Wall Hill

Around Wall Hill, we work in homes near The Woolpack Inn, St Chad's House and Saddleworth School. Nearby too are Holy Trinity CofE Dobcross Primary School (under half a mile east) and Holy Trinity Church (0.5 miles east). For rail, the closest station is Greenfield station, roughly 1.3 miles south-east of the centre. Other landmarks nearby include Mossley (2.7 miles south) and Royal Oldham Hospital (3.9 miles west). Open spaces near Wall Hill include Pots and Pans Hill.

Map of Wall Hill © OpenStreetMap contributors

Wall Hill questions

Can you fix rust around the plughole?

Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.

How long does the repair take to cure?

Most baths can be used the day after. We confirm the time before we leave.

Do you repair coloured baths?

Yes. The colour is mixed on site to suit your bath, including pastel and older colours.

Do you do work for letting agents?

Yes. We work for landlords, agents, builders and businesses as well as homeowners in Wall Hill.

Are there extra charges for Wall Hill?

There’s no separate call-out charge. The fixed price covers the visit and the work.

How do I book?

Just photos, your postcode and a contact number. On the day, access to the room.

Is repairing better than replacing?

In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we will tell you.

Can you price it without visiting?

Usually, yes. A close-up and a wider photo are enough to give a fixed quote.

What your bath is made of matters

Composite and resin

Composite baths are dense and solid, and often freestanding. Chips and scratches can be filled and colour matched, in much the same way.

Pressed steel

Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so early repairs matter.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.