Shetland Islands · Scotland
Bath Repair in Urafirth
Fixed-price bath repair in Urafirth and the surrounding area, typically in one visit.
- Repairs from £95
- Snagging damage from a refit
- Rust spots around the plughole
What we do, step by step
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a few hours, depending on the damage. We tidy up before we leave and tell you when it’s ready to use.
- First, we check the damage against your photos and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Ensure the room can be ventilated
- Mention any parking restrictions or tricky access
- Tell us if there are stairs or a lift
How to get a price
Email us a picture of the damage and one of the whole item, with your ZE2 postcode, and we will come back with a fixed quote.
Advice
How we handle bath repair in Urafirth
Most of our bath repairs take a few hours, and the bath is back in use the day after. You will not need a plumber or tiler, because the bath does not move. We regularly repair whirlpool & spa baths, roll-top & freestanding and acrylic, and common reasons people get in touch are a chipped rim or side and rusty patches near the plughole.
A one-year guarantee comes as standard.
- Area
- Urafirth (ZE2)
- Region
- Shetland Islands
- Cover
- A year, on every repair
- Quotes
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.
Work for landlords and builders
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we’ll handle the rest.
Other services in Urafirth
Keeping it looking good
So the finish stays in good condition:
- Rinse it down after each bath
- Have new chips seen to early
- Stick to mild cleaners and a soft cloth
- Do not leave razors or cans standing in the bath
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust can start.
A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.
Common problems we fix in Urafirth
A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and taps and wastes are tightened against the surface. Sooner or later, most baths pick up a chip.
Send us a photo if you notice any of these:
- Scuffs and scratches in the surface
- Hairline or through cracks in acrylic
- Rust by the waste and overflow
- Impact holes in acrylic
Questions to ask before you book
- Who turns up on the day
- How the colour is matched
- Aftercare advice
- How soon you can use it again
About Urafirth
Urafirth is in the Shetland Islands. Across the ZE2 area, we come to you. We cover all 63 towns and villages in the Shetland Islands, from the larger towns to small villages.
We work across ZE2 and the streets around it. We also cover the places around Urafirth: Hillswick (1 mile south-west), Hogaland (3 miles east), Braehoulland (4 miles west), Ollaberry (4 miles east) and Sullom (5 miles south-east). Some remote addresses need extra planning, so call us to arrange it.
Landmarks near Urafirth
For a walk, there is The Wadill.
Why repair rather than replace?
A new bath brings a chain of other jobs: tiles along the rim generally crack when it comes out, the panel may not fit the new one, and the plumbing has to be disconnected and refitted. A repair skips all of it. Our bath repair starts from £95. What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your photos, so you know the cost before you book.
Why book with us
- One price list for the whole UK
- One visit for most repairs
- Colours mixed by hand to suit your surface
- No need to remove anything
Read our pricing and resurfacing vs replacement cost guide.
FAQs for Urafirth
What happens after I send photos?
We come back with a fixed price, plus dates. You’re under no obligation.
Can you redo an old repair?
Yes. We take out the old repair and do it properly. Tell us about it when you send pictures.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.
Do you cover the entire of the Shetland Islands?
We cover the entire UK, including Urafirth and the rest of the Shetland Islands. Just include your postcode and we will confirm dates.
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
What information do you need?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
When a repair isn’t the answer
Honesty matters more than a booking, so here’s what a repair won’t do:
- A bath that moves underfoot, until its support is fixed
- Rust that has eaten right through a steel bath
- Leaking fittings, which need a plumber
If in doubt, send photos and we will say what we think before you book.
Materials we work on in Urafirth
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
- Acrylic
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
About our accreditations · Every repair comes with a one-year guarantee.
