Staffordshire · England
Bath chip & crack repair in Wall, Staffordshire
Bath repair in Wall without the cost of replacing. Send us photos for a fixed price, then we come to you.
- Repairs from £95
- Scuffs and scratches in the surface
- Cracks in an acrylic bath
Bath repair in Wall without replacing anything
We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath and the tiles around it. You can normally use the bath the day after. We regularly repair whirlpool & spa baths, acrylic and roll-top & freestanding, and people most often call us about chips under the taps and snagging damage from a refit.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Area
- Wall (WS14)
- Area hub
- Staffordshire
- Warranty
- 12 months on all our work
- Quotes
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
When to call us in Wall
Baths take more knocks than people expect: bottles, shower heads and razors are dropped every day, and taps and wastes are tightened against the surface. Sooner or later, most baths pick up a chip.
Common reasons people in Wall contact us are:
- A kit repair that didn’t last
- Rusty patches near the plughole
- Hairline or through cracks in acrylic
- Chips on the rim or sides
Comparing quotes
- What aftercare is recommended
- Who turns up on the day
- Whether the price covers travel
- What prep work is covered
Prices and what affects them
Repairs from £95. You will not pay by the hour. The price is based on:
- Previous DIY repairs that have to come out
- Unusual colours or finishes
- The type of damage
- How many areas need work
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Send pictures for a quote
Two or three clear photos are normally enough. It helps if you send:
- Any earlier repairs or coatings
- Daylight if possible, and no flash reflection
- Something in shot to show the size
- One picture of the whole bath
To get a price, send two or three pictures using our quote form or call us. We’ll say straight away whether it can be repaired.
Repairing versus replacing in Wall
A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, the panel may not fit the new one, and a plumber has to disconnect and reconnect everything. A repair skips all of it. Our bath repair starts from £95. A repair is priced on what needs doing, not your postcode. You’ll see the full price before you book, with no extras added later.
What you get with us
- Straight answers about what a repair can do
- Dust sheets down, tidy finish
- A year’s guarantee on all work
- CHAS and Constructionline accredited
See our prices page or bath cost comparison.
When we’d advise against a repair
We will not take on work that will not last, so here’s what a repair cannot put right:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Wear across the whole surface, which needs re-enamelling
- A steel bath rusted through
Send us pictures and we’ll tell you honestly.
Surfaces we repair
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
What your bath is made of matters
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches can be filled and colour matched, in much the same way.
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
Wall and the surrounding area
Wall is about 2 miles south-west of Lichfield, in Staffordshire. Jobs in Wall are booked in like any other job: a fixed price from your pictures, then a visit to do the work. Wall is one of 512 towns and villages in Staffordshire we cover. We work right across the region, from Wall to Birmingham (13 miles away).
Postcode districts we cover here: WS14. Local streets include Market Lane, Green Lane and The Butts, all of which we cover. Close by, we cover Chesterfield (1 mile south), Pipehill (1 mile north), Muckley Corner (1 mile west), Hilton (1 mile south-west) and Darwin Park (1 mile north-east). Further out, we also cover Stafford (15 miles north-west), Burton upon Trent (14 miles north-east), Tamworth (8 miles east), Cannock (7 miles west), Rugeley (8 miles north-west) and Burntwood (3 miles north-west).
What’s near Wall
Around Wall, we work in homes near Beacon Park, Church of St John and King Edward VI School. The nearest railway station is Shenstone station, about 1.4 miles south. Nearby you will also find Ogley Hay Rural (1.8 miles west) and Letocetum Roman Baths And Museum (under half a mile south-west). Not far away are Bourne Pool and Minster Pool.
How to look after the repair
Aftercare is simple, and it makes a real difference:
- A dripping tap stains enamel, so fix it early
- Keep abrasive pads and gritty cleaners away from the bath
- Put a towel in the bath if you are working above it
- Have new chips seen to early
There is nothing special to do after a repair, beyond gentle cleaning. Avoid bleach-based and gritty cleaners.
Do not leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
What we do, step by step
We agree an arrival time beforehand, so you’re not left guessing. Once we’re there, the work takes a few hours, depending on the damage for most jobs. We leave the room clean and you will know when it can be used.
- First, we check the damage against your photos and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Getting ready for the visit
- Move bottles, mats and clutter away from the area
- Make sure the room can be ventilated
- Tell us if there are stairs or a lift
Get a quote
A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them over. You will get a fixed quote, not an estimate.
Read more
Questions from Wall
Can you do more than one item on the same visit?
Yes. Doing several items on one visit usually costs less than separate visits. Include photos of each item.
What happens once I’ve sent pictures?
We look at the photos and reply with a fixed quote and some dates. If we need another angle, we’ll ask.
Do you work in Wall?
Yes. We cover the entire UK and come to Wall. Send pictures and we will quote, or call 0345 017 0787.
What about rust by the waste?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
Is the work guaranteed?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Do you cover the whole of Staffordshire?
Everywhere in the UK, Wall included. Travel is included in the price.
Can you quote from photos?
Nearly always. We only ask to see it in person if the pictures cannot show what we need.
Also in Wall
About our accreditations · Every repair comes with a one-year guarantee.
