Staffordshire · England

Bath & shower resealing (mastic) in Wall, Staffordshire

Our technicians come to Wall for bath, shower and sink resealing with new mould-resistant silicone. Nothing is taken out, and the work is guaranteed.

  • Gaps by the taps
  • Black spots in the silicone
  • An untidy old seal
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath resealing in Wall?

Common questions in Wall

Why does mould come back so fast?

Mostly moisture and poor ventilation. We use mould-resistant silicone, and ventilation helps it last.

Can I add another job to the visit?

Yes, and it’s frequently cheaper. Just add the extra items to your photos and we will quote them together.

Is there a call-out fee?

We do not add a call-out fee. Your fixed price includes everything.

Do I need to be at home?

Yes. We need access to the room while we work, at a time we agree with you.

What happens once I’ve sent photos?

We check the damage, the material and your postcode, then reply with a quote.

Are you accredited?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

How much does bath resealing cost in Wall?

Because every job differs, we price from pictures. You will get a fixed figure before you book.

When can I use the bath after resealing?

Normally about a day later. We will tell you the exact time.

About our bath resealing in Wall

The key to a good reseal is getting all of the old silicone out. Fresh sealant does not stick to old, which is why many DIY jobs peel. Our repair technicians work on wet rooms, kitchen worktops & sinks and basins & vanity units, and the jobs we see most are old sealant that looks dirty and missing sealant behind the taps.

Peace of mind is built in: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.

Area
Wall (WS14)
Area hub
Staffordshire
Warranty
A year, on every repair
Quotes
Fixed and free, based on pictures
Telephone
0345 017 0787
Updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

How it works

On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a couple of hours. We clean up when we’re done and let you know when you can use it again.

  1. We protect the area and mask the joint lines.
  2. Old sealant and residue are removed.
  3. We clean, treat and dry the joint.
  4. We run a continuous bead of new silicone.
  5. We smooth the bead, remove the tape and leave it to cure.

How to prepare

  • Let us know if it has been repaired before
  • Make sure the room can be ventilated
  • Keep children and pets away from the room on the day

How to get a price

Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we will reply with a fixed price. There is no charge for the quote and no obligation.

Get a free quote

Related advice

What we cannot put right

Some problems need a builder, plumber or fitter rather than us:

  • Hollow or loose tiles
  • Very wide gaps that need a trim
  • Hidden water damage

Not sure? Send photos and we will give you a straight answer.

Surfaces we repair

  • Wet rooms
  • Baths
  • Shower trays & enclosures
  • Kitchen worktops & sinks
  • Basins & vanity units

Aftercare tips

To keep it looking its best for years:

  • Open a window after bathing
  • Wipe the joints dry after use
  • Don’t stand toiletries on the seal
  • Clean the sealant gently and regularly

Good ventilation is the best protection, and wipe the joints after use so mould struggles to take hold.

Don’t wait until water gets behind the bath. Gaps or lifting edges mean it needs doing.

Materials and what they mean for the repair

Baths

We fill the bath before sealing, to open the joint fully.

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.

Landlords, agents and businesses in Wall

We carry out planned and one-off repairs for housing associations and facilities teams in Staffordshire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.

If you manage property in Wall, we will quote for several properties at once. Send photos for each one and we’ll price them together.

Signs you need bath resealing in Wall

Poor ventilation speeds things up: moisture sits on the joints longer, and mould grows faster.

Signs it’s time to call us include:

  • Missing sealant behind the taps
  • Silicone coming away from the tiles
  • Mould you can’t clean out
  • Water getting behind the bath or tray

Questions to ask before booking

  • Aftercare advice
  • What prep work is covered
  • How long it needs to cure
  • What the guarantee covers, and for how long

How to compare quotes

Our work in Wall

Wall is about 2 miles south-west of Lichfield, in Staffordshire. We agree a date that works for you, and we will give you an arrival time in advance, so you are not left waiting in all day. Wall is one of 512 towns and villages in Staffordshire we cover. You can also see our page for Birmingham, about 13 miles away.

Our repair technicians cover all of WS14 and the streets around it. We regularly work on streets such as Market Lane, Green Lane and The Butts. Neighbouring places we cover include Chesterfield (1 mile south), Pipehill (1 mile north), Muckley Corner (1 mile west), Hilton (1 mile south-west) and Darwin Park (1 mile north-east). Within a short drive, we also cover Stafford (15 miles north-west), Burton upon Trent (14 miles north-east), Tamworth (8 miles east), Cannock (7 miles west), Rugeley (8 miles north-west) and Burntwood (3 miles north-west).

Near you in Wall

In Wall, that means homes near Beacon Park, Church of St John and King Edward VI School. The nearest railway station is Shenstone station, about 1.4 miles south of the centre. A little further out are Ogley Hay Rural (1.8 miles west) and Letocetum Roman Baths And Museum (within half a mile south-west). For a walk, there is Bourne Pool and Minster Pool.

Map of Wall © OpenStreetMap contributors

What bath resealing costs

We price every job individually, from your pictures. What matters most is:

  • How many items we do on one visit
  • The size and number of damaged areas
  • Unusual colours or finishes
  • Previous DIY repairs that have to come out

We charge the same wherever you are, so there’s no premium for Wall. The job itself decides the price: the material, the amount of damage and how many items.

Send photos for a quote

It only takes a minute to photograph the damage, and it saves a visit. Please include:

  • Good light, ideally daylight, without flash glare
  • One picture of the entire bath or shower
  • One sharp close-up of the damage
  • Any earlier repairs or coatings

You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.

Can I fix it myself?

For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.