Birmingham · England

Bath chip & crack repair in Walmley, Birmingham

We travel to Walmley for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.

  • Repairs from £95
  • A chip where the taps sit
  • Scratches you can feel with a fingernail
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Walmley

DIY kit or professional repair?

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it does not work out, we can still repair it properly.

Bath repair in Walmley, done in place

A typical bath repair is a few hours’ work, and the bath is back in use the following day. You won’t need a plumber or tiler, because nothing is disconnected. We regularly repair acrylic, whirlpool & spa baths and pressed steel enamel, and the jobs we see most are snagging damage from a refit and holes from dropped items.

Every repair comes with a one-year guarantee, wherever you are in Birmingham.

Broken acrylic bath corner, rebuilt and refinished (before and after)
Where
Walmley (B76, B72)
Area hub
Birmingham
Warranty
A year, on every repair
Price
From £95. Free and fixed, from your pictures
Telephone
0345 017 0787
Last updated
23 October 2026

Looking after it afterwards

It’s all simple stuff:

  • Don’t scrub with anything abrasive
  • Give the bath a quick rinse after use
  • Protect the bath with a towel when doing jobs nearby
  • Get any new chip repaired before it rusts

Leave the repair to cure for as long as we say before using the bath. From then on, mild cleaning is all it needs.

Stop using the bath if a crack lets water through until it’s repaired. Leaks under a bath can damage floors and ceilings.

Common problems we fix in Walmley

Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.

Clients generally contact us about:

  • A hole punched through by something heavy
  • A kit repair that didn’t last
  • Damage beneath the taps
  • Cracks in an acrylic bath

Questions to ask before booking

  • How the colour is matched
  • What preparation is included
  • Is the price fixed, and does it include VAT?
  • How to look after the finish

Our hiring checklist

Walmley questions

Can pets and children be at home?

On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.

Will the repair show?

The goal is a repair that blends in. The rest of the bath’s condition makes a difference, and we’ll tell you what to expect.

What happens once I’ve sent pictures?

You get a fixed price and available dates. If anything’s unclear, we’ll ask for another photo.

Is a bath repair permanent?

Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.

Do you work in Walmley?

We do. We send a technician to Walmley for every job, with no extra charge for travel.

What about rust by the waste?

Yes, very often. The rust is cut back to clean metal and sealed before we fill and finish it.

How do I book?

A close-up, a wider photo and your postcode. Then we will agree a date.

Is there a guarantee?

Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.

Where we work around Walmley

Walmley is about 2 miles south-east of Royal Sutton Coldfield, in Birmingham. Anywhere in B76, we come to you. Our repair technicians cover 140 places across Birmingham, from the larger towns to small villages. We work right across the region, from Walmley to Birmingham (6 miles away).

We cover every part of the B76 and B72 postcode area and the streets around it. That includes homes on Lane Croft, Swale Road and Ashurst Road. We also cover the places around Walmley: Wylde Green (1 mile south-west), Pype Hayes (1 mile south-west), Boldmere (1 mile west), Maney (2 miles north-west) and Driffold (2 miles north-west). Within a short drive, we also cover Birmingham (6 miles south-west), Lee Bank (7 miles south-west), Cape Hill (8 miles south-west), Streetly (4 miles north-west), Paradise (6 miles south-west) and Chinese Quarter (6 miles south-west).

Near you in Walmley

Typical jobs here are in homes near Bishop Walsh Catholic School, Church of St John the Evangelist and Plantsbrook Local Nature Reserve. Nearby too are Anstey College of Physical Education (1.4 miles west) and The Deanery Church of England Primary School (under half a mile north-east). Walmley’s nearest station is Wylde Green station, about 1.4 miles west. Further afield, we also cover the area around Castle Vale Shopping Centre (1.6 miles south) and Bromwich Castle (2.3 miles south). Green spaces nearby include Park Hall Nature Reserve and Shard End Lake.

  • Parks and local facilities nearby include Sutton New Hall (0.6 miles south-east)
Map of Walmley © OpenStreetMap contributors

How we price bath repair

Repairs from £95. Each job gets its own fixed price. This is what makes a difference:

  • The size and number of damaged areas
  • Any earlier repairs that need removing first
  • The material and finish
  • The colour and finish to match

Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.

Send pictures for a quote

Almost every job we do is priced from pictures. This is what we need:

  • Your postcode, so we can check dates
  • A coin or ruler next to the damage for scale
  • What it’s made of, if you know
  • A clear, close picture of the problem area

Email us a picture of the damage and one of the whole item, and tell us you are in Walmley, and we will come back with a fixed quote.

What we do, step by step

We turn up when we said we would and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. Most visits take a morning or an afternoon, and the room is left clean and tidy.

  1. We clean the area and remove any loose enamel or rust.
  2. The chip or crack is filled, then sanded level with the bath.
  3. We mix the colour on the day to match your bath’s exact shade.
  4. Finish coats go on, then the repair is polished to blend in.
  5. We leave it to cure; you can normally use the bath the following day.

How to prepare

  • Tell us about parking, stairs or access
  • Let us know which floor the room is on
  • Make sure the area is dry

Get a quote

Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote the same day in most cases.

Send photos for a quote

Related advice

Should you replace it?

For damage in one or two places, a repair is the obvious choice. It costs far less than a new bath plus fitting, it’s done in one visit, and nothing else in the room changes. Prices start from £95. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

Why book with us

  • Honest advice, even when it means no job
  • Accredited with CHAS, Constructionline and SafeContractor
  • Colours mixed by hand to suit your surface
  • Free fixed quotes from pictures

Take a look at our prices page or resurfacing vs replacement cost guide.

Repairs by material

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.

Cast iron

Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the body of the bath lasts a very long time, which makes it well worth repairing.

Landlords, agents and businesses in Walmley

We work for landlords, letting agents and housing providers in Walmley as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

We carry out planned and one-off repairs for housing associations and facilities teams in Birmingham and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.