Buckinghamshire · England
Bath chip & crack repair in Walton, Buckinghamshire
Fixed-price bath repair in Walton and the surrounding area, generally in one visit.
- Repairs from £95
- Chips on the rim or sides
- Chips under the taps
Materials and what they mean for the repair
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so repair chips early.
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.
Bath repair in Walton, done in place
Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, normally in one visit. Typical jobs include chips along the edge of the bath and rust by the waste and overflow, in cast iron enamel, whirlpool & spa baths and pressed steel enamel.
Every job is backed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Location
- Walton (HP21, HP20)
- County
- Buckinghamshire
- Guarantee
- One year on every repair
- Price
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What we do, step by step
You don’t need to empty the room. We bring everything we need with us, lay protective sheets and get going once we have agreed what we are doing. Most jobs take two to three hours for most chips, and you can get on with other things while we are there.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the day after.
Before we arrive
- Let the surface dry out before the visit
- Tell us about parking, stairs or access
- Ensure the room can be ventilated
Get a quote
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price the same day in most cases.
Read more
Questions from Walton
Is a cracked acrylic bath repairable?
Most of the time. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.
Will the repair show?
We aim for a repair you can’t easily find. How well it disappears depends on the condition of the rest of the bath.
Are there extra charges for Walton?
Travel is included in the price, with the same prices everywhere we work.
Can I add another job to the visit?
Of course, and it generally saves money. Just add the extra items to your pictures and you’ll get one combined price.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.
Can landlords book you?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
Is there any odour?
Expect a mild smell while we’re working that clears as it cures.
Is a bath repair durable?
Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps it last.
Do you need bath repair in Walton?
A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.
Keep an eye out for any of the following:
- A chip where the taps sit
- Snagging damage from a refit
- Deep scratches in acrylic
- A kit repair that didn’t last
What to look for in a quote
- How the colour is matched
- What the guarantee covers, and for how long
- What happens if the damage is worse than the photos show
- What preparation is included
How we price bath repair
Prices start from £95. We price every job individually, from your pictures. What matters most is:
- Where the damage is and how we get to it
- How hard the colour is to match
- Whether old repairs or coatings need taking off
- The size and number of damaged areas
We do not add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from pictures
Before you send photos, a few simple things make all the difference:
- Any earlier repairs or coatings
- Good light, ideally daylight, without flash glare
- The material, if you know it
- Something in shot to show the size
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed price. Quotes are free and you are under no obligation.
About Walton
Walton is about 1 mile west of Turnfurlong, in Buckinghamshire. Across the HP21 area, we carry out the work at your property. Walton is one of 263 places in Buckinghamshire we cover. Our nearest city page is London, about 37 miles away.
Every address in HP21 and HP20 is within our area. You’ll find streets such as Croft Road, Stoke Road and Walton Road, and we cover them all. Nearby, we also work in Queens Park (1 mile north-east), California (1 mile west), Aylesbury (1 mile north-west), Southcourt (1 mile south-west) and Elmhurst (1 mile north). We also work in nearby towns such as High Wycombe (13 miles south), Chesham (11 miles south-east), Buckingham (15 miles north-west), Amersham (13 miles south-east), Beaconsfield (15 miles south-east) and Princes Risborough (6 miles south).
What’s near Walton
Our clients here include homes close to The Aristocrat pub, Stocklake Park Community School and Aylesbury High School and the streets around them. Other local landmarks include Holy Trinity (under half a mile north-west) and Oak Green School (0.6 miles west). There’s a railway station in Walton itself: Aylesbury station. Other landmarks nearby include Royal Buckinghamshire Hospital (0.8 miles north-west) and Roald Dahl Children's Gallery (0.6 miles north-west). Not far away are Coombe Hill.
Towns and villages near Walton
What else we do in Walton
What a repair cannot fix
Some jobs aren’t right for a repair, for example:
- Water coming from the waste or taps rather than the bath
- Metal that has corroded all the way through
- Wear across the entire surface, which needs re-enamelling
If in doubt, send photos and we’ll say what we think before you book.
Surfaces we repair
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
Should you replace it?
Replacing a fitted bath normally involves a plumber, removing the old bath, re-tiling and a new panel and getting rid of the old bath. Repairing it deals only with the damage in a single visit. Prices start from £95. The price reflects the work involved, not your postcode. You will see the full price before booking, with nothing added on the day.
Why book with us
- Colour-matched on site
- Dust sheets down, tidy finish
- We come to you, anywhere in the UK
- Every repair guaranteed for a year
Read our pricing or bath cost comparison.
Aftercare tips
Once the work has cured, treat it gently:
- Check that an acrylic bath does not move when you stand in it
- Fix dripping taps early to stop staining and limescale
- Have new chips seen to early
- Rinse the bath after use, especially in hard water areas
Leave the repair to cure for as long as we say before using the bath. After that, gentle cleaning keeps it looking good.
Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Take it off before we arrive.
About our accreditations · Every repair comes with a one-year guarantee.
