Dorset · England
Bath chip & crack repair in Walton Elm, Dorset
Problem with your bath in Walton Elm? We repair it in place, match it on site and guarantee the work for a year.
- Repairs from £95
- An old repair that has yellowed or come loose
- Rusty patches near the plughole
Walton Elm and the surrounding area
Walton Elm is about 10 miles north-west of Blandford Forum, in Dorset. Jobs in Walton Elm are booked in like any other job: a fixed quote from your photos, then a visit to do the work. Our technicians cover 462 places in Dorset.
We cover every part of DT10. Nearby, we also work in Pleck (1 mile west), Marnhull (1 mile north), Hinton St Mary (1 mile south), Sturminster Newton (2 miles south) and Fifehead Magdalen (2 miles north). Further out, we also cover Blandford Forum (10 miles south-east), Gillingham (6 miles north), Shaftesbury (6 miles north-east), Sherborne (9 miles west), Peacemarsh (6 miles north) and Milborne Port (6 miles west).
Local landmarks in Walton Elm
We visit homes around St Gregory's Church of England Primary School, Church of St Gregory and Sturminster Newton High School, among other places. Nearby you’ll also find Westminster Memorial Hospital (5.9 miles north-east) and Sturminster Newton Museum and Mill (2.3 miles south). The countryside around Walton Elm includes Girdlers Coppice.
How we handle bath repair in Walton Elm
Bath repair is our most common job. Chips on the rim, rust around the waste and cracks in acrylic are all fixed without removing the bath, normally in a single visit. Typical jobs include a failed DIY repair that’s discoloured or lifting and a chip where the taps sit, across whirlpool & spa baths, cast iron enamel and pressed steel enamel.
All our work is covered by our one-year guarantee, wherever you are in Dorset.
- Location
- Walton Elm (DT10)
- County
- Dorset
- Warranty
- 12 months on all our work
- Quotes
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Can I fix it myself?
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it does not work out, we can still repair it properly.
Aftercare tips
How the surface is treated afterwards matters:
- Make sure an acrylic bath is firm underfoot
- Put a towel in the bath if you are working above it
- Do not leave razors or cans standing in the bath
- Avoid scourers, wire wool and gritty cream cleaners
Care for the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.
Rust under enamel spreads surprisingly quickly. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.
How the visit works
We turn up when we said we would and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. The work itself takes a morning or an afternoon, and the room is left clean and tidy.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the following day.
Preparing for the visit
- Mention if the room is upstairs or in a flat
- Keep pets and children out of the room while we work
- Open a window if you can
Ask for a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Read more
Places near Walton Elm
Other services in Walton Elm
Questions from Walton Elm
Can you quote from photos?
Generally, yes. A close-up and a wider photo are enough to give a fixed price.
Can tenants book a repair?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
I tried a repair kit. Can you fix it?
Yes, we do this frequently. The old material comes out, any rust is treated, then we repair it properly.
Is there a call-out fee?
There’s no separate call-out charge. The fixed price covers the visit and the work.
Can you repair a hole in a bath?
Often, if there is access underneath. We back the hole, fill it and refinish the surface.
Will the repair last?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is it OK to have pets in the house?
Just keep them out of the work area. We’ll let you know when it’s safe to use again.
Signs you need bath repair in Walton Elm
Acrylic baths that crack nearly always have a support problem. Legs that are not adjusted, a missing cradle or a soft floor let the base flex until it cracks.
Customers usually contact us about:
- A chip where the taps sit
- Snagging damage from a refit
- Hairline or through cracks in acrylic
- Scuffs and scratches in the surface
Questions to ask before you book
- Whether they match the colour on site
- How long the guarantee is and what it covers
- How long it needs to cure
- A fixed price, and whether VAT is included
Materials and what they mean for the repair
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They do not rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
What bath repair costs
Prices start from £95. We price every job individually, from your photos. The main factors are:
- The size and number of damaged areas
- Any earlier repairs that need removing first
- How many items we do on one visit
- How hard the colour is to match
The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed quote from your photos, so you know the cost before you book.
Send photos for a quote
Good pictures mean an accurate price. Here’s what helps:
- The material, if you know it
- A wider photo showing the whole bath
- Whether it’s been repaired or coated before
- Natural light rather than flash
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Landlord and trade work in Walton Elm
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Honest limits
A few problems are outside what a surface repair can do:
- A bath that moves underfoot, until its support is fixed
- Wear across the entire surface, which needs re-enamelling
- A steel bath rusted through
Send us photos and we will tell you honestly before you book.
Materials we work on in Walton Elm
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
About our accreditations · Every repair comes with a one-year guarantee.
